GMC Yukon stalling problems

Filed Sep 29, 2026 · Engine · 72,850 miles · MO

The contact owns a 2021 GMC Yukon. The contact's wife stated that while driving at an undisclosed speed, the vehicle lost motive power and was unable to restart. The vehicle was towed to a dealer, where it was determined that a fuse had failed and needed to be replaced. The vehicle was repaired. The contact's wife stated that while driving 55 MPH after the repair, the vehicle unexpectedly shifted into neutral, stalled, and lost motive power. The vehicle was unable to restart. The vehicle was towed to another dealer, where it was diagnosed that metal shavings were found in the oil, causing the engine to seize. The contact was informed that the engine needed to be replaced. The contact associated the failure with the federal safety agency Campaign Number: 25V274000 (Engine and Engine Cooling). The manufacturer was made aware of the failure on the manufacturer's website and by phone, and a case was opened. The approximate failure mileage was 72,850.

Filed Sep 29, 2026 · Engine · NY

My 2024 GMC Yukon Denali has experienced repeated and serious stalling, restart hesitation, shutdown, and loss-of-propulsion issues that have created an ongoing safety concern for me, my children, and other drivers. On one occasion, while I was actively driving with my children in the vehicle, the Yukon completely lost propulsion and died. I was only able to coast/roll the vehicle to a complete stop because it no longer had power. I previously reported that incident to the federal safety agency. Since then, there have been numerous additional occasions when I have been driving and come to a stop at a traffic light, stop sign, or in traffic and the vehicle has stalled or seriously hesitated before restarting. On September 23, 2026, while driving with my children in the vehicle, I stopped at a red light in heavy traffic. Without warning, the vehicle completely shut off, shifted into neutral, and displayed a message instructing me to restart the vehicle. I had to manually restart the Yukon before I could continue driving. This was the first time while stopped that the vehicle completely shut off, went into neutral, and required a manual restart. During these incidents, my children were in the vehicle and I was surrounded by other vehicles and heavy traffic, creating a serious safety concern. GMC has been repeatedly notified about these issues. Despite multiple complaints and prior repair attempts, the problems have continued and GMC has not provided a meaningful resolution. The cause of the most recent failure is currently unknown.

Filed Sep 29, 2026 · Engine · FL

Engine failed . Stalled in the middle of the road . Engine ran bad . Shaking knocking and trebling. No engine lights on .

Filed Sep 21, 2026 · Engine · TN

I am filing this complaint regarding severe, excessive oil consumption in my 2021 GMC Yukon equipped with the 6.2L V8 engine (VIN: [XXX]). The vehicle is consuming oil at an accelerated and hazardous rate. Specifically, the engine oil level drops completely below the viewable crosshatches on the oil dipstick well before the vehicle’s automated Oil Life Monitoring system reaches 50%. This level of rapid oil depletion creates a significant safety risk, as it puts the vehicle at risk of sudden engine stalling, severe mechanical failure, or total engine lockup while driving at highway speeds, potentially causing a crash. General Motors has issued Safety Recall N252494000 to address internal manufacturing defects within the 6.2L engine that lead to mechanical damage and heavy oil loss. Although my vehicle is a 2021 model with the exact 6.2L V8 engine experiencing the identical, severe oil loss symptoms detailed in the recall, my specific VIN is currently excluded from the recall list. I request that the federal safety agency investigate this issue and pressure General Motors to expand the parameters of Recall N252494000 to include all affected 6.2L engines exhibiting this dangerous defect. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Filed Sep 21, 2026 · Fuel system · PA

My 2021 GMC Yukon has approximately 36,900 miles. On September 12, 2026, the vehicle was at an authorized GMC dealership and passed a state safety inspection. On September 19, 2026, the check-engine warning light illuminated and I returned to the dealership. The dealer performed diagnostic testing and told me the fuel pump pressure was approximately 400 PSI when it should be approximately 700 PSI. I was told the fuel pump needs to be replaced. The vehicle is currently at the dealership awaiting the replacement part: Fuel pump I was not aware of a fuel-pump failure before the warning light appeared. I am particularly concerned because this failure occurred at only approximately 36,900 miles. GM previously recalled 3,386 2021 GMC Yukons under the federal safety agency Campaign 21V‑739/GM Recall N212332040 for a fuel-pump power-control-module defect that can cause the fuel pump to fail or operate intermittently, interrupt fuel flow and potentially cause the engine to stall. My 2021 Yukon is not included in that recall and currently shows no unrepaired recalls associated with my VIN. I believe this represents a potential safety concern because inadequate fuel delivery or a fuel-system failure while driving could cause reduced engine power or an unexpected stall, increasing the risk of a crash. Given the low mileage, the dealer-confirmed fuel-pressure problem, and the existing fuel-pump-related safety recall affecting other 2021 Yukons, I am concerned that my vehicle may have the same or a related defect despite not being included in the recalled population. I believe the federal safety agency should evaluate whether additional 2021 Yukons should be included in a safety investigation or recall. I am paying out of pocket to have the fuel pump replaced and am filing this complaint to document the failure.A fuel-pump failure at only 36,900 miles is extremely concerning. I ask the federal safety agency to determine whether my vehicle has the same or a related defect and whether the existing recall population should be expanded.

Filed Sep 1, 2026 · Engine, Fuel system · TX

My engine has failed twice. I am now on my third engine. The vehicle stalled while driving on a highway, was in the shop for nearly 3 months and was "fixed" with same 6.2 engine. Eight months later it stalled again was in the shop for 2 months with a new engine. I was informed that they still don't know the issue and they just put the same type of engine. A bandaid was placed in my vehicle and I'm suppose to feel safe in it.

Filed Aug 28, 2026 · Engine · 81,000 miles · DE

The contact owns a 2021 GMC Yukon. The contact stated that while pulling into a parking space at an undisclosed speed, the vehicle stalled. The contact associated the failure with the federal safety agency Campaign Number: 25V274000 (Engine and Engine Cooling); however, the VIN was not included in the recall. The vehicle was towed to a dealer, where it was diagnosed that the fuel pump control module had failed. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was approximately 81,000.

Filed Aug 26, 2026 · Electrical, Fuel system · MN

1. What component or system failed or malfunctioned. The Fuel Pump Module failed unexpectedly while the vehicle was being driven. Failure caused the engine to stall, resulting in a complete loss of power and mobility. Unsure if part is available for inspection. 2021 GMC Yukon have a recall N252516900, but our VIN is not included in this. Can our VIN be added to this recall please? 2. How was your safety or the safety of others put at risk? The vehicle abruptly stalled while being driven through a parking lot, causing a complete loss of power and leaving the vehicle disabled in an active traffic area. Because the vehicle could not be shifted out of PARK, it became an obstruction, creating a hazard for other drivers navigating the parking lot and increasing the risk of a collision. 3. Has the problem been reproduced or confirmed by a dealer or independent service center? Yes. After the vehicle was towed to a local mechanic on a flatbed truck, the dealer diagnosed and confirmed that the Fuel Pump Module had failed, which caused the vehicle to stall and lose power. 4. Has the vehicle or component been inspected by the manufacturer, police, insurance representatives, or others? The vehicle was inspected by a local repair shot, which diagnosed the failed Fuel Pump Module. The vehicle was also evaluated during the towing process. To my knowledge, the manufacturer, police, or insurance representatives have not separately inspected the vehicle or component. 5. Were there any warning lamps, messages, or other symptoms of the problem prior to the failure, and when did they first appear? Prior to the failure, there were no significant symptoms indicating an imminent fuel system failure. When the incident occurred, the vehicle abruptly stalled, lost all power, and displayed a message indicating that the vehicle was "not in a condition to shift," preventing it from being shifted out of PARK. This message first appeared immediately following event.

Filed Aug 26, 2026 · Engine · 63,073 miles · WV

The contact owns a 2024 GMC Yukon. The contact stated that while her husband was driving at approximately 45–50 MPH, the vehicle stalled. No warning light was illuminated. The driver pulled over to the side of the road, and the vehicle was towed to the dealer, where it remained for five weeks before being diagnosed. The dealer determined that the engine was blown and needed to be replaced. The vehicle was repaired at the owner's expense. The contact associated the failure with the federal safety agency Action Number: EA25007 (Engine, Engine and Engine Cooling). The manufacturer was notified of the failure, but no assistance was provided. The failure mileage was approximately 63,073.

Filed Aug 26, 2026 · Engine · 4,700 miles · NE

The contact owns a 2026 GMC Yukon. The contact stated that while driving approximately 15-20 MPH and approaching a stop in Nebraska, there was an abnormal sound coming from the vehicle. The vehicle was shaking and vibrating abnormally. The contact called the local dealer, and an appointment was scheduled. The failures persisted while waiting for the appointment. While driving at an undisclosed speed, the vehicle lost motive power and stalled. The driver alerted OnStar about the failure. The vehicle failed to restart. The vehicle was towed to the local dealer, where it was diagnosed with complete engine failure. The contact was informed that the engine needed to be replaced. The vehicle was repaired; however, the contact no longer wanted the vehicle. The manufacturer was contacted and opened a case and escalated the concerns. The failure mileage was approximately 4,700.