My 2024 GMC Yukon Denali has experienced repeated and serious stalling, restart hesitation, shutdown, and loss-of-propulsion issues that have created an ongoing safety concern for me, my children, and other drivers. On one occasion, while I was actively driving with my children in the vehicle, the Yukon completely lost propulsion and died. I was only able to coast/roll the vehicle to a complete stop because it no longer had power. I previously reported that incident to the federal safety agency. Since then, there have been numerous additional occasions when I have been driving and come to a stop at a traffic light, stop sign, or in traffic and the vehicle has stalled or seriously hesitated before restarting. On September 23, 2026, while driving with my children in the vehicle, I stopped at a red light in heavy traffic. Without warning, the vehicle completely shut off, shifted into neutral, and displayed a message instructing me to restart the vehicle. I had to manually restart the Yukon before I could continue driving. This was the first time while stopped that the vehicle completely shut off, went into neutral, and required a manual restart. During these incidents, my children were in the vehicle and I was surrounded by other vehicles and heavy traffic, creating a serious safety concern. GMC has been repeatedly notified about these issues. Despite multiple complaints and prior repair attempts, the problems have continued and GMC has not provided a meaningful resolution. The cause of the most recent failure is currently unknown.
2024 GMC Yukon: engine stalls while driving
10 of the 106 complaints about the 2024 GMC Yukon describe engine stalls while driving.
- owner complaints
- 10
- of this car's complaints
- 9%
- recalls
- 1
Engine stalls while driving by model year
What owners say
The contact owns a 2024 GMC Yukon. The contact stated that while her husband was driving at approximately 45–50 MPH, the vehicle stalled. No warning light was illuminated. The driver pulled over to the side of the road, and the vehicle was towed to the dealer, where it remained for five weeks before being diagnosed. The dealer determined that the engine was blown and needed to be replaced. The vehicle was repaired at the owner's expense. The contact associated the failure with the federal safety agency Action Number: EA25007 (Engine, Engine and Engine Cooling). The manufacturer was notified of the failure, but no assistance was provided. The failure mileage was approximately 63,073.
This is a supplemental report to my original complaint (the federal safety agency ID XXX) regarding my 2024 GMC Yukon (VIN [XXX]). I am providing additional detail: prior to GM's recall being issued, I contacted Hatchett Buick GMC by phone and visited in person on multiple occasions reporting engine sputtering, stalling, hesitation, and total loss of power and electrical shutdown while driving. I was repeatedly told these were minor issues not affecting anyone and not to worry about them. As a result, the vehicle was not formally serviced for these issues until September 2025 — roughly three months after the recall was finally announced, more than a year after I purchased the vehicle. Since that recall repair and a subsequent "best guess" repair performed by GM technicians (their own description, not mine), the vehicle continues to sputter, hesitate, stall, and intermittently lose power. I have ongoing safety concerns driving this vehicle INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The contact owns a 2024 GMC Yukon. The contact stated that while the vehicle was stopped at a red traffic light, the accelerator pedal was depressed and the vehicle stalled. The message "Conditions not Available to Change Gear" was displayed. The vehicle was restarted and driven to the residence. The contact stated that several days later, while pulling into a parking lot, the vehicle unexpectedly stalled. The vehicle was restarted and was then towed to the dealer; however, the failure could not be duplicated. The manufacturer was notified of the failure. The failure mileage was approximately 24,000.
This report documents two separate safety incidents involving the same vehicle that occurred on different dates. Approximately one month prior to the most recent incident, while driving my young children to school, the vehicle experienced a sudden and severe loss of braking effectiveness while in motion. I was unable to stop normally at stop signs and had to roll through and roll to a stop. I was required to press the brake pedal fully to the floor to slow the vehicle, and even then braking response was significantly reduced and not functioning as designed. The engine remained running and the vehicle could still accelerate. After stopping and restarting the vehicle, braking function temporarily returned. On a later date, while again transporting my children, the vehicle experienced a complete loss of power while driving. The vehicle abruptly shut down while in motion. I was unable to accelerate and experienced loss of power assisted braking. The vehicle only came to a stop after coasting. Following this shutdown, a burning or melted plastic odor was present. The vehicle was later towed and inspected by a dealership. The battery was replaced; however, this did not resolve the issue. After the battery replacement, the vehicle later hesitated to start again. The exact cause of these failures remains unknown. These incidents occurred without warning and represent serious safety critical failures involving braking and propulsion systems. Both incidents placed my children, myself, and other motorists at risk. Had either event occurred on a highway or heavily trafficked roadway, there would have been little to no ability to safely slow or stop the vehicle, creating a significant risk of collision or serious injury. Due to these events, I no longer feel safe operating this vehicle and have stopped driving it. The vehicle remains available for inspection.
On March 21, 2025 my 2024 GMC Yukon Denali's engine died while driving 80 miles an hour down the highway with my family. We were able to coast to the shoulder. The vehicle would not restart. We called a tow truck. When the tow truck arrived the vehicle started but we decided to take the vehicle to closest GMC dealer. They ran diagnostics on the lights that were showing on the dash and nothing was reported. They had no recommendations. We were 3 hours from home returning from Spring Break so we decided to keep traveling. We made it about 120 miles and again the engine died while traveling 70+ miles on the highway. We were able to safely coast to the shoulder. We called a tow truck and the Yukon was towed to the local GMC dealership. The next week it was reported to me that the Yukon would need a new engine. The 1, 3, 5 rod bearing had spun and the 3rd trust bearing had spun. Since there were no rental cars in the city available we rented a U-Haul truck and drove 2 hours home. Almost one month later we are awaiting the new engine to be delivered.
The motor is randomly revving at braking so far only under 10 miles an hour. Yesterday it stalled twice on me and cut off braking under 10 miles an hour. I had to come to a complete stop while restarting the vehicle. Definitely has me worried if it happens on the highway or higher speeds.
The contact owns a 2024 GMC Yukon. The contact stated that while a friend was driving at highway speeds, the vehicle suddenly experienced a loss of automotive power and stalled. The vehicle was towed to the local dealer, who diagnosed that the engine had failed and needed to be replaced. No further information was available. Additionally, the vehicle had previously experienced a loss of braking while driving with the cruise control activated. The contact stated that while driving at a slower speed, the vehicle lurched forward, striking a gate, and causing damage to the front bumper of the vehicle. The cause of the failure was not yet determined. The local dealer and manufacturer were notified of the failure. The contact was informed of the federal safety agency Action Number: PE25001 (ENGINE, ENGINE AND ENGINE COOLING). The contact stated that the vehicle had experienced the failure listed in the recall. The failure mileage was 16,000.
engine shut down while driving... complete engine failure was the cause
On [XXX], I was driving approximately 70 MPH on [XXX] when the engine stopped without warning. I had the vehicle towed to Causley GMC where it was repaired. I was on the way home from Causley driving on [XXX] when the engine stopped again. I had it towed back to Causley. The next day they called me and said that the engine was destroyed and needed to be replaced. Both times it stalled I was on the expressway and if I were not able to coast to the side of the road, I would have been in a very dangerous position for me and everyone else on the highway. There was not a warning before the engine stopped, so it was very fortunate for me that I had enough momentum to be able to coast far enough to get in a safe position.
Service bulletins that may apply
- Condition where the connecting rod and/or crankshaft engine components in these vehicles may have...
- Under Field Actions N252494000, N252494001, the service procedure includes performing a PICO test on...
- This technical bulletin provides a procedure to replace the camshaft actuator magnet to correct customer...
- This service bulletin provides information on replacing the intake manifold when the engine is replaced...
- This bulletin advises the tech to inspect deeper into what may be to main
- The service bulletin advises the tech of a normal transmission shift condition and the delay in throttle...
- This service bulletin provides information to dealership personnel for new vehicles with less than 1,000...
- This warranty administration bulletin provides policy information on vehicles outside of a California...
Related recalls
Engine and engine cooling: engine: hard parts internal/mechanical
- What is wrong
- General Motors LLC (GM) is recalling certain 2021-2024 Cadillac Escalade and Escalade ESV, Chevrolet Silverado 1500, Suburban, and Tahoe, GMC Sierra 1500, Yukon, and Yukon XL vehicles equipped with a 6.2L V8 gas engine. The connecting rod and/or crankshaft engine components may have manufacturing defects that can lead to engine damage and engine failure.
- Risk
- Engine failure increases the risk of a crash.
- Remedy
- Dealers will inspect the engine, and as necessary, repair or replace the engine. For vehicles that pass inspection, dealers will add higher viscosity oil, install 6 oil fill cap, replace the oil filter, and update the owner's manual. Repairs will be performed free of charge. Owner notification letters were mailed June 18, 2025. Owners may contact Cadillac customer service at 1‑800‑333‑4223, Chevrolet customer service at 1‑800‑222‑1020, or GMC customer service at 1‑800‑462‑8782. GM's number for this recall is N252494000.
Recall number 25V274000 · Recall details
Questions about the 2024 GMC Yukon stalling
Is engine stalls while driving a common problem on the 2024 GMC Yukon?
10 of 106 owner complaints about the 2024 GMC Yukon (9%) mention engine stalls while driving. The model year with the most reports is 2021.
Is there a recall or service bulletin for this on the 2024 GMC Yukon?
There is 1 recall and 78 service bulletins for the same area of the car. Check them below with your VIN.
Other symptoms on the 2024 GMC Yukon
Engine failure 38Knocking 11Loss of power 10Check engine light 8Hesitation 5
VIN decoder
See the problems and recalls for an exact car
Buying a used 2024 GMC Yukon?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history