2017 Hyundai Santa Fe: engine knocking or ticking

Filed Aug 24, 2026 · Electrical, Engine · NJ

My 2017 Hyundai Santa Fe, purchased new from Lynnes Hyundai in February 2017, has approximately 93,000 miles. The vehicle previously developed a significant oil-consumption/engine problem that was diagnosed by Hyundai, and Hyundai replaced the engine with a remanufactured engine. Approximately two weeks after the engine replacement, the check-engine light illuminated and DTC P1326 was identified. The dealership replaced the knock sensor. Approximately two weeks later, the check-engine light illuminated again with a recurring P1326 condition. The vehicle is currently at Lynnes Hyundai and has been there approximately three weeks while they attempt to determine the cause. Hyundai Techline is involved. Prior to the current repair visit, while traveling approximately 60 mph, the vehicle experienced a very forceful hesitation that jerked the vehicle. I immediately slowed down and pulled onto the shoulder. The vehicle continued to hesitate intermittently while I drove slowly to safety. I was concerned that the vehicle could lose power or shut down while I was driving at highway speed, creating a risk of a crash. The recurring P1326 condition has been confirmed by the Hyundai dealership. The vehicle and engine have been inspected by Hyundai/Lynnes Hyundai multiple times, including after the engine replacement. The current recurring condition has not been resolved. The check-engine light is the warning lamp associated with the current condition. I do not know the underlying cause of the recurring P1326 condition; Hyundai is currently attempting to diagnose it. The vehicle is currently available for inspection at Lynnes Hyundai.

Filed Jul 10, 2026 · Transmission · VA

The vehicle is in limp mode and is displaying a flashing check engine light with a P1326 powertrain code. The vehicle in question is a 2017 Hyundai Santa Fe Sport equipped with a Theta II 2.4L GDI engine at 118,000 miles. Per the service campaign T3G, listed on the federal safety agency website, this vehicle is covered under warranty repair since it is a Theta II engine vehicle that is displaying an active P1326 power train code. The vehicle is under he 10 Year/120,000 miles limitations of the extended warranty. The dealer just submitted to us a quote to repair the vehicle and is stating that none of the repairs listed are covered under warranty. This includes a quote to replace the engine knock sensor, which is a warranty item under the T3G service campaign’s extended warranty.

Filed Apr 20, 2026 · Engine · AL

Seem like there was a recall on the 3.3L engines on the Hyundai Santa Fe starting January 26, 2017, for engine related knocking noise. My Vin is [XXX] according to the Manufacturing plate it was made in Korea released on January 04, 2017. I realize it is a 22-day window on the recall but after an oil change the motor has started knocking the oil is the right viscosity, full to capacity, and oil filter changed. I drove 200 miles after an oil change then the motor started knocking. Is there a certain stamp on the cam shafts to verify which of the 420 vehicles are affected by this recall? INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Filed Apr 16, 2026 · Engine · PA

My 2017 Hyundai Santa Fe Sport 2.0T (Theta II 2.0L GDI Turbo engine) has been diagnosed with burned exhaust valves requiring a complete engine replacement. This is the second catastrophic powertrain failure on this vehicle in under two years. In July 2024, I paid $2,754 to replace the turbocharger at an authorized Hyundai dealership (Wright Hyundai, [XXX] ). The burned valves are consistent with carbon buildup on intake valves, a widely documented and known deficiency of the GDI fuel delivery system used in the Theta II engine family. Carbon deposits restrict airflow, cause valve seating issues, and lead to valve failure. This is an inherent design characteristic of the engine, not a maintenance-related failure. At no point during my ownership — including during the turbocharger repair — was I informed of this known issue or advised of any preventive measures such as fuel system cleaning treatments. I am additionally concerned that the dealership's diagnostic process was incomplete. The service center diagnosed the burned valves and immediately recommended an engine replacement without performing a bearing clearance test or completing the full diagnostic flowchart. The dealership has refused to perform further diagnostics unless I pay additional fees, and has refused to share documentation from a tech line case opened with Hyundai corporate. Because diagnostics were halted at the burned valve finding, a connecting rod bearing failure — the specific defect covered under the Theta II class action settlement (In re: Hyundai and Kia Engine Litigation, NoXXX) — has not been ruled out as a contributing cause. Hyundai's National Consumer Affairs office (Case #XXX) denied my goodwill request without addressing either the known GDI carbon buildup issue or the fact that this is the second catastrophic failure on this engine platform. This vehicle has approximately 86,000 miles. I purchased it as a second owner in August 2020 at 42,730 miles. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 5

Filed Apr 6, 2026 · Transmission · TX

On April 2, 2026, the engine in my 2017 Hyundai Santa Fe failed catastrophically while my wife was driving. The vehicle lost power suddenly and completely. There was no warning and no prior symptoms. She was able to pull over safely in a residential area. The vehicle was towed to an authorized Hyundai dealer, where the service representative suspects connecting rod bearing failure—the same failure mode described in the federal safety agency recalls 17V226 and 17V578 affecting other 2017 Santa Fe vehicles with the Theta II 2.4L engine. The engine is available for inspection upon request. My VIN does not appear in the recall population, yet the failure is identical to the documented defect. This suggests the recall scope was insufficient. One week prior, we drove this vehicle on a 500+ mile family road trip with our child. The failure that occurred could have happened at highway speed. We are lucky to be alive. No warning indicators appeared before the failure. The vehicle has been regularly maintained. The problem has been preliminarily confirmed by the dealer as suspected bearing failure, pending teardown.

Filed Mar 20, 2026 · Brakes, Electrical · CO

After performing regular oil changes, and even a new fuel pump sensor, I experienced an issue. Last oil change was within the past two weeks. Driving home from the mountains, I heard a knocking sound from the engine bay. I narrowed it down to all gears above 2500RPM, increasing knocking with RPM speed. I took it easy on the engine, mostly coasting down the mountain. Suddenly during acceleration on an uphill, a pop sounded, and copious white smoke started coming from the engine bay. I pulled over despite having no power brakes but I was fortunate to be near an off ramp in a rural area. Trying to troubleshoot roadside, i noticed fluid on the tie rod, but I wasnt able to determine what kind of fluid it was. When I try to start the car, there is one single click, the engine wont even attempt to turn over. Oil, battery and check engine lights are all on. After towing, I found that the fluid leaking from the vehicle is oil. The vehicle is currently at a transmission shop, but from my research, this isnt a transmission issue but a blown rod bearing the Hyundai engines are know for. I will be contacting a dealership to see if they will at least confirm my diagnosis.

Filed Feb 4, 2026 · Engine, Fuel system · CA

I currently owned an 2017 Hyundai Santa Fe FWD with the 3.3 V6 Engine with approximately about 136,000 Miles. We were driving into Vegas when we heard the knocking Engine Sounds. Immediately we called the Dealership in Vegas advising them we were going to TOW the vehicle in. Once we get the Vehicle towed over to the dealership, we waited till the following Monday where it was authorized to have the engine replaced. We were so glad about that. The vehicle was going to be completed by early January and we got the news the Vehicle was completed but now having misfiring issues due to Faulty injectors. I was advised that this was not covered due to the mileage. This was an non issue when I turned in the vehicle to Hyundai. I made several attempts to contact my Case Manager and this was again denied due to the Mileage. For a vehicle with less than 140K miles and being less than 10 years old, we are very upset with this process and for Hyundai knowing that there were concerning issues with both the Fuel Injectors and Engine.

Filed Jan 22, 2026 · Engine · IN

Vehicle: 2017 Hyundai Santa Fe On June 9, 2024, when my wife started the vehicle, the engine was immediately knocking. Due to concern for safety and the risk of catastrophic engine failure, the vehicle was not driven and was towed to our home to prevent further damage. Hyundai was contacted shortly after discovery of the issue. During a phone call, we were told there were no active recalls applicable to our vehicle and no replacement engines available. Due to the lack of immediate support and the vehicle being undrivable, we were forced to send the vehicle to a third-party mechanic on June 14, 2024, to complete a necessary engine repair. On August 21, 2024, we received warranty documentation from Hyundai related to this issue. Despite providing all requested documentation and Hyundai contacting the third-party mechanic directly, the warranty claim process was repeatedly delayed. We were told multiple times that the case was in its final stage, only to later be assigned a new case manager with no knowledge of the case, requiring the process to restart. The vehicle was not returned to us until April 7, 2025, resulting in an extended loss of our primary vehicle for our family. We paid approximately $10,000 out of pocket for the engine repair while the warranty claim remained unresolved. We have since been informed that Hyundai may require the engine to be repaired or replaced again by a dealer with no reimbursement, potentially rendering the previous repair and financial loss unnecessary. This raises serious concerns regarding Hyundai’s handling of a known engine issue and their warranty process. Hyundai Case Number: XXX INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Filed Jan 3, 2026 · Engine · FL

Excessive oil leaks. When I fix an oil leak another pop up. Im fixing my 4th oil leak. You can smell the oil burning. Engine is making knocking sounds. Hood latch is not working. You have to hold the hood or it will come down.

Filed Dec 10, 2025 · Engine · PA

Engine went into limp mode and a knocking sound was heard. Had car inspected and oil changed but no improvements occurred. Took car to dealership and it failed engine test. Hyundai will not cover replacement under open extended warranty.

Filed Nov 26, 2025 · Electrical, Engine · NY

While driving on the highway at normal speed, the vehicle suddenly lost power with no prior warning lamps or messages, placing me and other road users at immediate risk. The engine rapidly began knocking, lost acceleration, then stalled completely. I had to coast to the shoulder, which was extremely dangerous in high-speed traffic. The failure appears consistent with bearing wear and debris circulation described in Hyundai Recall 168 and TSB 17-01-071, which warn that certain Hyundai 3.3L engines can suffer internal metallic debris contamination during manufacturing. This can restrict oil flow, damage the bearings, and lead to sudden engine seizure without warning — exactly what happened in this incident. After the failure, the engine was inspected by a Hyundai dealership, but no oil sample, no debris test, and no photo documentation were provided, even though the recall procedure requires these steps when symptoms match knock/no-start failure patterns. The cause was not reproduced or confirmed by any independent mechanical test; the vehicle simply failed suddenly and has remained inoperable since. The incident created a major safety risk because the sudden loss of power happened at highway speed with no safe way to maintain vehicle control or speed. Based on known recall documentation, the symptoms match the described safety-related engine defect. The vehicle remains available for inspection. There were no injuries or police reports, but the situation definitely could have resulted in a crash. In my assessment, this is a critical safety defect related to internal engine debris and bearing failure, consistent with the known Hyundai recall pattern for this engine family

Filed Nov 18, 2025 · Engine · OH

My 2017 Hyundai Santa Fe experienced a sudden and complete engine failure without any warning signs. There were no warning lights, no check engine light, and no unusual noise before the failure. The engine stalled while trying to start, ran very rough for a second, and then completely shut off. After that, the engine would not start again at all. A certified independent mechanic inspected the vehicle and confirmed the engine suffered a mechanical failure consistent with rod bearing wear or crankshaft damage, which is the same issue described in Hyundai’s known engine safety recalls. I later took the vehicle to a Hyundai dealership. They also confirmed that the engine had failed, but said it could not be repaired under Hyundai’s programs because my vehicle was not listed in the specific recall. I was never notified of any safety campaigns or recalls. I am not the first owner, so the required recall inspections and updates were never completed on this vehicle before I bought it. The sudden engine shutdown created a serious safety risk, especially because there was no warning before it failed. This failure matches the symptoms described in Hyundai’s Theta II engine defect investigations. I am requesting that the federal safety agency investigate whether this vehicle should be included in the affected group, and whether this engine failure is part of the broader safety defect already identified in many Hyundai engines from the same model years.