Excessive corrosion may result in the left or right rear suspension lower link bracket becoming detached from the frame, which can affect vehicle handling and potentially cause a crash
The worst 2000 Isuzu Rodeo problems
Ranked by number of owner complaints. Mileage and cost come from what owners wrote.
Problems by type
Tap a problem to see which part fails, at what mileage and in which other years.
- Body84
- Suspension65
- Engine37
- Brakes36
- Fuel system30
- Transmission18
- Electrical15
- Acceleration14
- Airbags7
- Seat belts6
- Steering6
- Tires6
- Lights3
- Visibility3
- Wheels3
- Driver assistance1
- Locks1
- Seats1
Specific symptoms reported on the 2000 Isuzu Rodeo
Check engine light 24Stalling 24Fuel gauge 21ABS 15Brake failure 9Grinding brakes 6Jerking 6No deployment 5Fire or smoke 5Pulling 5Won't start 5
Recalls 3
Suspension: rear
- What is wrong
- Isuzu is recalling certain model year 1998-2002 isuzu rodeo and model year 2002 isuzu axiom vehicles, and honda is recalling certain 1998-2002 honda passport vehicles, that were originally sold, or are currently registered, in the states of maine, new hampshire, vermont, massachusetts, rhode island, connecticut, new york, new jersey, pennsylvania, delaware, maryland, the district of columbia, west virginia, ohio, indiana, michigan, illinois, wisconsin, minnesota, iowa, missouri, and kentucky. Vehicles that have experienced sustained exposure to highly corrosive materials used in some jurisdictions for road deicing purposes may experience excessive corrosion in the vicinity of the forward mounting point bracket for the left or right rear suspension lower link prior to the time that such corrosion would normally be expected.
- Risk
- Excessive corrosion may result in the left or right rear suspension lower link bracket becoming detached from the frame, which can affect vehicle handling and potentially cause a crash.
- Remedy
- Dealers will inspect the rear suspension lower link bracket area. For vehicles in which little or no corrosion is found, the area will be treated with an anti-corrosive compound. For vehicles in which corrosion has damaged the rear suspension lower link bracket and affected its connection to the vehicle frame, a reinforcement bracket will be installed. In the rare event the corrosion is so severe that the reinforcement bracket remedy would not be appropriate, a repurchase offer will be extended to the vehicle's owner. All inspections and remedies will be provided free of charge for vehicles that are 10 years old or less. For vehicles older than 10 years, isuzu will offer a free remedy, but only if the vehicle is presented to an isuzu service facility, or honda dealer (as applicable), dealer within 12 months of when owner notifications were issued. The safety recall began on december 10, 2010. Isuzu owners may contact isuzu at 1‑800‑255‑6727. Honda owners may contact honda at 1‑800‑999‑1009.
Recall number 10V436000 · Recall details
Air bags: frontal
- What is wrong
- On certain sport utility vehicles, the passenger-side air bag inflator modules were manufactured and shipped without a necessary component known as a check valve pin.
- Risk
- In the event of a crash, the air bag will not inflate properly or sufficiently resulting in an increased risk of injury to the seat occupant.
- Remedy
- Dealers will replace the passenger side air bag. Owner notification is expected to begin during august or september 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact isuzu at 1‑800‑643‑4070.
Recall number 02V213000 · Recall details
Air bags: frontal
- What is wrong
- Vehicle description: certain sport utility vehicles were built with the inflators in the passenger side air bag modules having the wrong amount of generant.
- Risk
- In the event of a crash that would trigger a passenger air bag deployment, too much generant can cause the inflator module to explode. If the air bag module explodes, metal and plastic debris could cause severe injury to vehicle occupants.
- Remedy
- Dealers will replace the passenger side air bag unit.
Recall number 01V055000 · Recall details
See all 3 recalls for the 2000 Isuzu Rodeo
Defect investigations
Rear Suspension Lower Link Detachment
On September 22, 2010, Isuzu Manufacturing Services of America, Inc (Isuzu) submitted a Defect Information Report (the federal safety agency Recall 10V‑436) to the federal safety agency affecting approximately 120,000 model year (MY) 1998-2002 Isuzu Rodeo and Honda Passport vehicles and MY 2002 Isuzu Axiom vehicles originally sold, or currently operated, in the following states:Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia and Wisconsin. All vehicle owners will receive the recall notification.Vehicles 10 years of age or younger will be provided with a free remedy.For vehicles older than 10 years, Isuzu will offer a free remedy provided the vehicle is presented to an Isuzu service facility or a Honda dealer (as applicable) no later than twelve (12) months after the date of mailing of the notification letter to the owner.The report describes a condition where vehicles operated in states using certain road deicing materials may exhibit excessive corrosion which may result in the left or right rear suspension lower link bracket becoming detached from the frame.According to Isuzu a detached lower link may affect vehicle handling and potentially cause a crash.The Office of Defects Investigation (ODI) analyzed complaint data and found that 114 of the 115 (99%) alleged complete lower link separations from the frame occurred in vehicles originally sold or operated in a state covered by the recall. Of these complaints 2 involved alleged crashes and 21 involved alleged loss of control incidents.The alleged crashes and loss of control incidents all occurred in vehicles operated in a state covered by the safety recall.Isuzu's recall instructs dealers to inspect the rear suspension lower link bracket area to determine if corrosion is present.For vehicles in which corrosion has damaged the lower link bracket area and affected its connection to the vehicle frame, a reinforcement bracket will be installed.For vehicles with no visible signs of corrosion, dealers with apply anti-corrosion material to reduce the likelihood of corrosion developing in the future. Based on Isuzu's safety recall, this Engineering Analysis is closed.A copy of the recall may be assessed on the federal safety agency's website using the reference number above.
EA09018
Rear suspension lower link failure
During preliminary evaluation pe09-030, isuzu motors america, inc (isuzu) noted two primary differences once the rear suspension lower link separation occurs between the alleged defect (separation of the lower link from the frame) of this investigation and a safety defect involving lower link separation from the rear axle addressed by isuzu in safety recall 00v‑058.in the case of the defect condition identified in recall 00v‑058, isuzu stated that the attachment bolt could detach fully, causing separation of the lower link from the rear axle possibly creating a loss of vehicle control. Isuzu also stated that this condition occurs early in the service life of the vehicle.in this investigation isuzu noted lower link separation from the frame is a progressive corrosion issue with prior warning to consumers.isuzu also stated that in the event of a lower link separation from the frame, the vehicle is still controllable and can be safely stopped. The office of defect investigation (odi) analyzed complaint data provided by isuzu and america honda motor company, inc (honda), as well as vehicle owner questionnaires submitted to odi from consumers.in total, there were 60 unique reports of lower link separations from the frame including 1 alleged crash and 7 loss of vehicle control incidents that may be related to the alleged defect.most of these complaints indicated that there was no warning prior to the link separation.this preliminary evaluation has been upgraded to an engineering analysis (ea09-018) to further assess the scope, frequency and risk to motor vehicle safety of the alleged defect in the subject vehicles.
PE09030
Technical service bulletins for the 2000 Isuzu Rodeo 77
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- This bulletin outlines the procedures for using the Alpine Exchange Program (the "Exchange Program"). The...
- Isuzu Commercial Truck of America, Inc. (ICTA) is providing the following procedural recommendations to...
- The following is a list of the Isuzu-recommended Threebond product part numbers identified in the various...
- The Isuzu Commercial Truck of America (ICTA) Service Technical Assistance Center (TAC) provides diagnostic...
- This service bulletin provides service information on new torque specification and installation procedure...
- Engine and engine cooling
- Engine and engine cooling
- Engine and engine cooling: exhaust system: emission control
- Equipment: electrical: navigational system(global positioning system)
- Equipment
2000 Isuzu Rodeo fuel economy
Official EPA estimates in miles per gallon (MPGe for electric). Ranges cover trims that share the same engine.
| Engine | Drive | City | Highway | Combined |
|---|---|---|---|---|
| 2.2L 4‑cyl | RWD | 18 | 21 | 19 |
| 3.2L 6‑cyl | RWD | 15 | 18-19 | 16 |
| 3.2L 6‑cyl | 4WD | 14-15 | 18-19 | 16 |
What 2000 Isuzu Rodeo owners say
Most recent owner complaints, unedited.
Tl* the contact owned a 2000 isuzu rodeo. While driving 25 MPH, the contact became distracted and crossed the yellow lane lines. In an attempt to avoid an oncoming vehicle, the contact jerked the vehicle to the side and caused the vehicle to rollover. The vehicle crashed into three trees and rolled off a cliff. In addition, the contact stated that the seat belt failed to retract and caused the contact to be thrown around inside the vehicle. The air bags failed to deploy. A police report was filed. The contact sustained a fractured sternum, a concussion, and injuries to the right knee that required medical attention. The manufacturer was not notified of the failure. The vehicle was towed and deemed destroyed. The failure mileage was 150,000. The VIN was unavailable.
Tl* the contact owns a 2000 isuzu rodeo. While driving various speeds, the contact heard an unusual noise and noticed that the front body frame was fractured. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure. The failure mileage was 151,000.
Tl* the contact owns a 2000 isuzu rodeo. While driving between 35-40 MPH, the contact lost control of the vehicle, which resulted in a side impact collision. The failure occurred without warning. A police report was not filed. The vehicle was towed to the contact's residence. The vehicle was not diagnosed or repaired. The contact stated that due to severe frame corrosion, the frame detached and struck the rear driver wheel, which ultimately caused the crash. The manufacturer was notified of the failure. There were no injuries. The failure mileage was approximately 125,000. ...updated 03/08/17
Tl* the contact owns a 2000 isuzu rodeo. While the vehicle was at an independent mechanic for routine service, the technician diagnosed that the subframe was corroded and needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The VIN was included in a voluntary manufacturer's recall; however, the manufacturer stated that it had expired. The failure mileage was 213,000.
I bought my 2000 rodeo new and it currently has 37000 actual miles. I recently saw rust in the driveway. I took this car to a honda body shop to see the underbody. Before putting it on the lift they saw that the frame was excessively rusted. Once in the air they looked at the whole underside and said that the frame and the lower control arm were holed with rust. I asked if any of this was repairable.they said they would not do the work because they would not assume the liability of a serious accident. This vehicle had the fixes prescribed by campaign 10v‑436 sb 10-11-s002a completed at sellers truck center in farmington hills, mi on september 9, 2011. This addressed the rear suspension but obviously the corrosion was so pervasive that this campaign was just a band-aid. As I read the various complaints on this site I strongly agree that these cars are a safety hazard and should be bought back by isuzu and taken off the road. Like many others I have sidelined mine and been forced to buy another car to replace it way before it was necessary. Ironically, this car is in almost pristine condition from the body up. I have contacted isuzu and received a letter in return in which they assert that they did everything they had to and that the original recall did not require more than dealing with the rear suspension and therefore I was out of luck. In the letter they said I could call for more information. I did and they offered to 'redo the procedures of the original recall.' when I pointed out that I have a car that is unsafe to drive and that the facility they wanted it taken to is an hour and a half away their comment was 'no one said you had to drive it. You could trailer it.' this isn't a good alternative either especially since I have a honda dealer less than two miles from my house and the honda passport suffered all the same
Tl* the contact owns a 2000 isuzu rodeo. While the vehicle was being serviced for routine maintenance, the contact was informed by the mechanic that the vehicle had excessive corrosion to the subframe. The contact was informed that the vehicle was unsafe and could not be repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 120,000.
Tl* the contact owns a 2000 isuzu rodeo. The contact stated that while driving at approximately 35 MPH, the vehicle veered to the left independently. The vehicle was not diagnosed or repaired. The contact mentioned that the vehicle was previously serviced under the federal safety agency campaign number: 10v436000 (suspension). The manufacturer was notified of the failure. The failure mileage was 102,000.
Tl* the contact owned a 2000 isuzu rodeo. While the vehicle was being serviced by an independent mechanic, the technician observed that the rear driver side frame was rusted throughout. As a result, the vehicle was unable to repair. The vehicle was deemed a total loss. The manufacturer was not made aware of the failure. The approximate failure mileage was 139,000.
Left side rear frame where it connects to the tire rusted through. Bottom piece has detached from one side. I just read their was a recall in 2010 but I never received anything. I bought my car in 2007. This is a serious situation, luckily I noticed it when I did, fortunately I wasn't driving. What do I do now? -thank you.
Compare the 2000 Isuzu Rodeo
Other model years
199119921993199419951996199719981999200020012002200320042008
Questions about the 2000 Isuzu Rodeo
Is the 2000 Isuzu Rodeo reliable?
Owners have filed 274 complaints about the 2000 Isuzu Rodeo, 7.0 times a typical Rodeo model year.
What is the most common problem with the 2000 Isuzu Rodeo?
Body and structure, with 84 complaints, typically around 120,000 miles. Next is suspension (65).
How many recalls does the 2000 Isuzu Rodeo have?
3 recalls, covering suspension and air bags.
What year does the Isuzu Rodeo have the most body problems?
The Isuzu Rodeo model years with the most body complaints are 2001 (214 complaints), 2000 (84 complaints) and 1999 (72 complaints).
What gas mileage does the 2000 Isuzu Rodeo get?
Official estimates for the 2000 Isuzu Rodeo range from 16 to 19 mpg combined. The most efficient version (2.2L 4-cyl, RWD) gets 18 city and 21 highway.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2000 Isuzu Rodeo?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history