The contact owns a 2018 Jeep Wrangler. The contact stated while driving at approximately 55 MPH, the vehicle violently shuddered. No warning light was illuminated. The vehicle was taken to an independent mechanic to be diagnosed; however, the cause of the failure was not determined. The vehicle was not repaired. The vehicle was taken back to the independent mechanic to be diagnosed; however, the cause of the failure was not determined. The vehicle was not repaired. The vehicle was taken to a different independent mechanic where it was diagnosed and determined that the track bar needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was unknown.
2018 Jeep Wrangler: shudder or vibration when accelerating
6 of the 1,829 complaints about the 2018 Jeep Wrangler describe shudder or vibration when accelerating.
- owner complaints
- 6
- of this car's complaints
- 0%
- recalls
- 4
Shudder or vibration when accelerating by model year
What owners say
The contact owns a 2018 Jeep Wrangler. The contact stated while driving over a significantly bumpy road surface and exceeding 50 MPH, the vehicle experienced the death wobble. The contact stated that the front end of the vehicle and the steering wheel shuddered violently. The contact released the accelerator pedal and the vehicle responded as needed at slow speeds. The vehicle was taken to the dealer, where it was diagnosed that the steering dampener had failed and needed to be replaced. The contact stated that the dealer replaced the steering dampener several times under warranty; however, the failure progressively worsened and occurred while driving over minor bumps. The vehicle was taken to a second dealer, Northland Chrysler Dodge Jeep Ram (14100 Eight Mile W, Oak Park, MI 48237); where it was diagnosed that the traction bar needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure, but no assistance was provided. The failure mileage was unknown.
The contact owns a 2018 Jeep Wrangler. The contact stated that while driving at 2 MPH, the engine started backfiring, and the vehicle was shuddering. Several unknown warning lights were illuminated. The vehicle was taken to an unknown dealer to be diagnosed; however, the cause of the failure could not be determined. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 14,500.
The contact owns a 2018 Jeep Wrangler. The contact stated that while driving at an undisclosed speed over a pothole, the steering wheel shuddered and vibrated violently. The vehicle was taken to an independent mechanic, who diagnosed that the failure was related to the federal safety agency Campaign Number: 18V343000 (Steering). The dealer and the manufacturer were not made aware of the failure. The vehicle was not repaired. The failure mileage was unknown.
When hitting a bump on the highway (for example- bridge seams) at highway speeds (55 MPH+) the jeep will shudder and shake, particularly the steering wheel & front end at times; sometimes when hitting a series of bumps the shuddering will intensify and is more difficult to stop. The only way to stop the shuddering is to slow down to speeds that are potentially unsafe on the highway - <30 MPH.
When hitting a bump on the highway (for example- bridge seams) at highway speeds (45 MPH+) the jeep will shudder and shake, particularly the steering wheel & front end at times; sometimes when hitting a series of bumps the shuddering will intensify and is more difficult to stop. The only way to stop the shuddering is to slow down to speeds that are potentially unsafe on the highway - <30 MPH.
Service bulletins that may apply
- The Customer May Complain About a Popping Noise, Grinding Noise, or an Intermittent No Reverse or Forward...
- The vehicle will exhibit a service transmission/check engine warning indicator for the following...
- Service transmission/check engine warning indicator for the 850RE, 8HP50, 8HP70, 8HP75, 8HP75-PHEV...
- Transmission "Transmission For transmission concerns related to DTCs P0733-00, P1DA8-00, and/or P1D92-00,...
- Transmission For transmission concerns related to DTCs P0733-00, P1DA8-00, and/or P1D92-00, a repair is...
- Plate
- Griding/Gear Clash From Transfer Case When Going Into 4WD, Above 5 mph (8 kph).
- Axle Assembly Do not replace the Axle for Axle Locker Sensor failure
Related recalls
Power train: clutch assembly
- What is wrong
- Chrysler (FCA US, LLC) is recalling certain 2018-2023 Jeep Wrangler, and 2020-2023 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
- Risk
- Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
- Remedy
- Dealers will replace the clutch assembly and update the software, free of charge. Owner notification letters were mailed from November 16, 2023 through July 25, 2024. Owners may contact (FCA US, LLC) customer service at 1‑800‑853‑1403. FCA US LLC's number for this recall is 19A. This recall expands and replaces previous recall 21V‑028. Vehicles previously repaired under recall 21V‑028 will need to have the new remedy completed.
Recall number 23V116000 · Recall details
Power train: clutch assembly
- What is wrong
- Chrysler (FCA US, LLC) is recalling certain 2018-2021 Jeep Wrangler and 2020-2021 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
- Risk
- Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
- Remedy
- FCA US LLC will notify owners, and dealers will add software to reduce engine torque capability when clutch assembly temperatures rise to a level that may damage the inner pressure plate, free of charge." FCA has ordered a stop sale for the affected vehicles as of February 25, 2021. Owner notification letters were mailed on March 4, 2021.
Recall number 21V028000 · Recall details
Power train: clutch assembly
- What is wrong
- Chrysler (FCA US LLC) is recalling certain 2018-2020 Jeep Wrangler and 2020 Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
- Risk
- The overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
- Remedy
- Chrysler will notify owners, and dealers will reroute a wire harness and inspect the clutch system, and replace components as needed. The recall began April 30, 2020. Owners may contact Chrysler customer service at 1‑800‑853‑1403. Chrysler's number for this recall is W12.
Recall number 20V124000 · Recall details
Power train: automatic transmission
- What is wrong
- Chrysler (FCA US LLC) is recalling certain 2018 Dodge Charger, Durango and Challenger, Jeep Grand Cherokee and Wrangler, Chrysler 300, and RAM 1500 vehicles. An incorrect transmission park lock rod may have been installed in the transmission.
- Risk
- If the incorrect park lock rod is installed, the transmission may not shift into 'PARK' and keep the vehicle from moving, increasing the risk of unintended vehicle movement and the risk of a crash.
- Remedy
- Chrysler will notify owners, and dealers will install the correct park lock rod, free of charge. The recall began June 28, 2018. Owners may contact Chrysler customer service at 1‑800‑853‑1403. Chrysler's number for this recall is U43.
Recall number 18V280000 · Recall details
Questions about the 2018 Jeep Wrangler shudder
Is shudder or vibration when accelerating a common problem on the 2018 Jeep Wrangler?
6 of 1,829 owner complaints about the 2018 Jeep Wrangler (0%) mention shudder or vibration when accelerating. The model year with the most reports is 2021.
Is there a recall or service bulletin for this on the 2018 Jeep Wrangler?
There are 4 recalls and 58 service bulletins for the same area of the car. Check them below with your VIN.
Other symptoms on the 2018 Jeep Wrangler
Pulling 163Steering lock-up 79Power steering loss 76Check engine light 62ABS 55Loss of power 55Warning lights 40Stalling 34Overheating 31Engine failure 30Ball joint 29Backup camera 27Fire or smoke 25Jerking 25Won't start 25Wipers 20Fuel gauge 19Screen failure 18Start-stop 18Won't shift 17Grinding brakes 15Adaptive cruise 13Misfire 12Slipping 12Windshield crack 12Knocking 10Harsh shifting 10Hesitation 10Brake failure 8Airbag light 7Transmission failure 6Headlights 5Key fob 5
VIN decoder
See the problems and recalls for an exact car
Buying a used 2018 Jeep Wrangler?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history