The transmission on this 2022 Jeep Wrangler Sport 2-door (3.6L) has twice failed to shift / provide motive power, requiring a tow each time. First incident: XXX, about 20,812 miles. A transmission warning appeared and the vehicle would not shift out of Park. It was towed to Stevens Creek Chrysler Jeep Dodge Ram, [XXX], Repair Order XXX. The dealer found DTC U11C2, replaced a new OEM Mopar valve body and a new Transmission Control Module, programmed them and road-tested the vehicle. It was picked up XXX. Second incident: XXX, about 21,209 miles. The transmission again would not go into gear and the vehicle could not move. It was towed XXX to the same dealer, Repair Order XXX, opened XXX and still open. The dealer says Jeep wants another valve-body replacement before condemning the transmission. Safety concern: loss of motive power / inability to shift, twice, without warning, can leave the vehicle unable to move and creates crash and stranding risk. No crash, fire, injury or fatality is reported for these incidents. The owner considers this a serious safety concern impairing use, value and safety. Prior damage: only a comprehensive insurance claim for rodent damage, not an accident. Vehicle background: purchased new in [XXX], delivered XXX (negotiated XXXX) from Sam Leman Chrysler Jeep Dodge of [XXX], listed sale price $43,875, no discount, under a 5-year / 60,000-mile powertrain warranty, and registered in [XXX]. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Jeep Wrangler won't shift problems
183 of the 15,954 owner complaints about the Jeep Wrangler describe stuck in gear or won't shift, most of them for the 2024 model year.
- owner complaints
- 183
- worst model year
- 2024
- typical repair cost reported
- $1,100
- typical mileage
- 52,119
By model year
Often reported together
Check engine light 50ABS 46Loss of power 25Warning lights 16Stalling 15Power steering loss 13Wipers 8Start-stop 7
Trouble codes mentioned
C2200 8P1E1D 3U0141 2P0344 2U11C2 1U1003 1U0594 1U0402 1U0126 1U0101 1
What owners say
The ABS module has internal failure. Jeep doesnt make the part anymore, a used parts salvage yard i was quoted $1100 as a special order part they might not even be able to get, a few module repair companies wont repair the jeep ABS module because they cant get the parts, and a couple that quoted me to repair it the cost was $2K to $3k to make the repair here in Tampa. How can Jeep stop making the part that you ABSOLUTELY NEED TO STOP YOUR VEHICLE SAFELY??!! How is this not a SAFETY ISSUE that people have to drive their vehicle, not knowing if it WILL OR WILL NOT POSSIBLY HIT SOMEONE OR SOMETHING IF THE VEHICLE HAS NO ANTILOCK BRAKES?? Makes driving in the rain hazardous, jeep slides on wet roads. Also will put your transmission into LIMP MODE, then the Jeep just doesnt want to move.. how is DODGE, Jeep, Mopar, NOT RESPONSIBLE FOR ANY OF THIS?? We buy a jeep and then FORCED TO DRIVE A DEFECTIVE AUTOMOBILE BECAUSE THEY DONT MAKE THE PARTS ANYMORE TO REPAIR IT??? Make it make sense!!!!
The module in the dash can't take temperature change and it goes bad and need to be replaced it make all the lights on the jeep go on and then the jeep won't go out of park the safty naturally won't even work to tow it after sitting for a bit it finally let me but in drive now less then 6 month later the jeep is in safty mode and won't start it is stuck at the dealership going on 6 day I have no car and makeing paments for a bricked jeep with both battery less than a year old to won't start the jeep has no reason to be in limp mode this is a 2020 jkl sport black and tan modle i just had it a little over a year now the first incident happened before a year
Aug 6 2026 turtle limp mode came on. Lost power. Sept 5,6 turtle mode came on. Slowed to a crawl with several cars behind me. Oct 3 turtle limp mode came on. Lost power thru intersection. Thankfully no oncoming traffic. Oct 4 turtle limp mode came on. Had to pull over and restart vehicle in traffic
One two occasions on the freeway the display will state "Service Engine See Dealer" and then the car goes into a limp mode and essentially shuts down. Both times we've had to quickly get to the emergency lane, wait for several minutes then turn the vehicle back on. We've taken the vehicle to the dealer and they stated that they diagnosed it and tried to recreate the issue but cannot reproduce it so they say there is nothing to fix.
ABS Module failed rendering my vehicle inoperable. Lost signal to all speed sensors and swaybar. Vehicle is stuck in limp mode. This is my only transportation. Manufacturer should have recalled this years ago, they know it’s a major problem.
ABS MODULE FAILURE- Jeep goes into limp mode and replacement parts are no longer manufactured or available to fix. Vehicle is undrivable. This is a known defect affects large number of jeeps. Dash lights on are ABS, downhill assist, check engine light, and more. Attempted to visit local dealer for replacement parts and they have been on back order for several years, attempted to have part repaired and are no longer repairable due to chips not being manufactured. This unit could inhibit effectiveness of brakes
Since the 68C recall work was done, it does not have the horsepower in electric mode that it used to and the gas motor of the hybrid kicks in much sooner than before. I was accelerating onto a freeway onramp when the ice turned on with high rpm, the motor backfired causing some sensor to trigger limp mode (60mph max). I had big rigs behind me going 75 braking hard. I will not let my wife drive it. It's not safe anymore.
68C recall software update has caused some form of loss of power, doesn’t fully power off, it feels as if it is throttling the electric motor causing the engine to suddenly start and rev high (5-7k RPM) bypassing the warm up time that’s built into the software for the engine. Now on 09/14/2026 (Monday) the vehicle through a DTC code “P0BBE-00” High Voltage Battery Voltage Variation. It went into limp mode while attempting to drive up the roll back (flatbed tow truck). Currently awaiting Dealer diagnostic.
2019 Jeep Wrangler JLU experienced intermittent CAN-C communication failure. Vehicle has repeatedly experienced simultaneous loss of multiple electronic systems. On September 7th 2026, while driving, vehicle unexpectedly lost electric power steering, windshield wipers activated without command, ABS/TPMS/ESC warning lights illuminated, and vehicle subsequently would not shift into gear after stopping at a traffic light. Hazard lights would not activate. After shutting vehicle off, vehicle would not enter ACC or restart normally. Opening driver’s door unexpectedly caused vehicle to enter ACC. Manipulating the CAN-bus wiring/STAR connector behind the glove box has historically temporarily restored normal operation. Vehicle has previously required repair to this wiring/connector, and the failure has recurred. This has been occurring for at least 3 years and since 60,000 miles. This presents a significant safety hazard because steering assistance, shifting/propulsion, and signaling were simultaneously affected while driving. It is a known Chrysler issue (FCA STAR Case S2108000146) and should be recalled as there is a CLEAR and present danger with this ongoing issue.
Related recalls
Power train: manual transmission: control module: software
- What is wrong
- Chrysler (FCA US, LLC) is recalling certain 2021 Jeep Wrangler and Jeep Gladiator vehicles that were previously remedied under the federal safety agency recall number 23V‑116. The software for the powertrain control module may cause an engine stall, which can result in a loss of drive power.
- Risk
- A loss of drive power increases the risk of a crash.
- Remedy
- Dealers will update the powertrain control module software, free of charge. Owner notification letters were mailed August 15, 2024. Owners may contact FCA US, LLC customer service at 1‑800‑853‑1403. FCA US LLC's number for this recall is 92B. Vehicles previously repaired under recall 23V‑116 will need to have the new remedy completed.
Recall number 24V572000 · Recall details
Power train: manual transmission
- What is wrong
- Chrysler (FCA US), LLC is recalling certain 2022-2023 Jeep Wrangler and Gladiator vehicles equipped with a manual transmission. The rearview camera may fail to display the rearview image and the reverse lights may not illuminate when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 111, "Rear Visibility" and 108, "Lamps, Reflective Devices, and Associated Equipment."
- Risk
- A disabled rearview image can decrease the driver's visibility of the rear view, and disabled reverse lights may not alert others that the vehicle is reversing, increasing the risk of injury or crash.
- Remedy
- Dealers will replace the gear position sensor, free of charge. Owner notification letters were mailed November 16, 2023. Owners may contact FCA US, LLC customer service at 1‑800‑853‑1403. FCA US, LLC's number for this recall is 92A.
Recall number 23V641000 · Recall details
Power train: clutch assembly
- What is wrong
- Chrysler (FCA US, LLC) is recalling certain 2018-2023 Jeep Wrangler, and 2020-2023 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
- Risk
- Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
- Remedy
- Dealers will replace the clutch assembly and update the software, free of charge. Owner notification letters were mailed from November 16, 2023 through July 25, 2024. Owners may contact (FCA US, LLC) customer service at 1‑800‑853‑1403. FCA US LLC's number for this recall is 19A. This recall expands and replaces previous recall 21V‑028. Vehicles previously repaired under recall 21V‑028 will need to have the new remedy completed.
Recall number 23V116000 · Recall details
Power train: clutch assembly
- What is wrong
- Chrysler (FCA US, LLC) is recalling certain 2018-2021 Jeep Wrangler and 2020-2021 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
- Risk
- Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
- Remedy
- FCA US LLC will notify owners, and dealers will add software to reduce engine torque capability when clutch assembly temperatures rise to a level that may damage the inner pressure plate, free of charge." FCA has ordered a stop sale for the affected vehicles as of February 25, 2021. Owner notification letters were mailed on March 4, 2021.
Recall number 21V028000 · Recall details
Power train: clutch assembly
- What is wrong
- Chrysler (FCA US LLC) is recalling certain 2018-2020 Jeep Wrangler and 2020 Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.
- Risk
- The overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.
- Remedy
- Chrysler will notify owners, and dealers will reroute a wire harness and inspect the clutch system, and replace components as needed. The recall began April 30, 2020. Owners may contact Chrysler customer service at 1‑800‑853‑1403. Chrysler's number for this recall is W12.
Recall number 20V124000 · Recall details
Power train: automatic transmission
- What is wrong
- Chrysler (FCA US LLC) is recalling certain 2018 Dodge Charger, Durango and Challenger, Jeep Grand Cherokee and Wrangler, Chrysler 300, and RAM 1500 vehicles. An incorrect transmission park lock rod may have been installed in the transmission.
- Risk
- If the incorrect park lock rod is installed, the transmission may not shift into 'PARK' and keep the vehicle from moving, increasing the risk of unintended vehicle movement and the risk of a crash.
- Remedy
- Chrysler will notify owners, and dealers will install the correct park lock rod, free of charge. The recall began June 28, 2018. Owners may contact Chrysler customer service at 1‑800‑853‑1403. Chrysler's number for this recall is U43.
Recall number 18V280000 · Recall details
Power train: clutch assembly: pedal/hand lever(motorcycle)
- What is wrong
- Chrysler (FCA US LLC) is recalling certain model year 2006 Dodge Viper and Jeep Wrangler and Liberty vehicles manufactured July 1, 2005, to July 31, 2006. In the affected vehicles, the springs within the clutch pedal position switch that prevents the vehicle from starting unless the clutch pedal is pushed down may break. As a result, the vehicle may not be started when the clutch pedal is pushed down or the engine may crank and start without the clutch pedal being pushed down causing the vehicle to unexpectedly lurch.
- Risk
- If the vehicle unexpectedly moves there is an increased risk of a crash.
- Remedy
- Chrysler will notify owners, and dealers will replace the clutch ignition interlock switch, free of charge. The recall began on August 31, 2015. Owners may contact Chrysler customer service at 1‑800‑853‑1403. Chrysler's number for this recall is R13.
Recall number 15V222000 · Recall details
Power train: automatic transmission: cooling unit and lines
- What is wrong
- Chrysler Group LLC (Chrysler) is recalling certain model year 2012-2013 Jeep Wrangler vehicles equipped with a 3.6L engine and an automatic transmission and manufactured January 23, 2011, through February 23, 2013. The power steering line may contact and wear a hole in the transmission oil cooler line resulting in a loss of transmission fluid.
- Risk
- A loss of transmission fluid may result in a loss of transmission function which may increase the risk of a crash.
- Remedy
- Chrysler will notify owners, and dealers will replace the power steering return tube assembly, free of charge. The recall began on September 23, 2013. Owners may contact Chrysler at 1‑800‑247‑9753. Chrysler's recall campaign number is N28.
Recall number 13V234000 · Recall details
Power train: automatic transmission
- What is wrong
- Chrysler is recalling certain model year 2010 jeep wrangler vehicles equipped with an automatic transmission. The transmission skid plate, which is close to the catalytic converter, can collect debris.
- Risk
- If this occurs, the debris can ignite without warning, resulting in a vehicle fire.
- Remedy
- Chrysler will notify owners, and dealers will replace the skid plate with a skid bar, free of charge. Owners may contact chrysler at 1‑800‑853‑1403.
Recall number 12V216000 · Recall details
Power train: axle assembly
- What is wrong
- Chrysler is recalling certain model year 2010-2011 jeep wrangler vehicles manufactured from july 12, 2010, through september 10, 2010. Some vehicles may experience a degradation of fastener torque for various front and rear axle attachments to the chassis module.
- Risk
- This could result in noise, or ultimately, degradation in steering and handling characteristics which could lead to loss of directional control of the vehicle increasing the risk of a crash.
- Remedy
- Dealers will re-torque all nineteen fasteners to the maximum residual torque values. This service will be performed free of charge. The safety recall began on march 24, 2011. Owners may contact chrysler at 1‑800‑853‑1403.
Recall number 11V145000 · Recall details
Questions about the Jeep Wrangler won't shift
Which Jeep Wrangler years have stuck in gear or won't shift problems?
The model years with the most reports are 2024 (24 complaints), 2018 (17 complaints) and 2013 (16 complaints).
How much does it cost to fix stuck in gear or won't shift on the Jeep Wrangler?
Owners who mentioned a price put the repair at about $1,100 (median of 5 complaints that include a dollar amount). Costs vary with mileage, warranty and where the work is done.
VIN decoder
See the problems and recalls for an exact car
Buying a used Jeep Wrangler?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history