Steering became increasingly sluggish and difficult to navigate; i took the vehicle into the shop and they said there is metal shards or shavings being worn into the power steering fluid and destroying the pump, clogging up the filter and the rack and pinion steering system is also being compromised making the vehicle unsafe to operate.
The worst 2010 Mercedes-Benz ML350 problems
Ranked by number of owner complaints. Mileage and cost come from what owners wrote.
Problems by type
Tap a problem to see which part fails, at what mileage and in which other years.
- Airbags67
- Electrical10
- Seat belts10
- Brakes6
- Engine5
- Lights5
- Steering4
- Body1
- Fuel system1
- Suspension1
Specific symptoms reported on the 2010 Mercedes-Benz ML350
Recalls 3
Service brakes, hydraulic: power assist: vacuum
- What is wrong
- Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2006-2012 ML, GL, and R-Class vehicles. Please refer to MBUSA's recall report for specific vehicle model details. Moisture may accumulate and cause corrosion in the brake booster housing unit, which can result in reduced brake performance or brake failure.
- Risk
- Reduced brake performance or brake failure can increase the risk of a crash.
- Remedy
- Owners are advised not to drive their vehicles until the remedy has been performed. Dealers will remove the rubber sleeve, inspect the brake booster, and as necessary, replace the brake booster. All repairs will be performed free of charge. Owner notification letters were mailed on May 24, 2024. Owners may contact MBUSA customer service at 1‑800‑367‑6372. MMUSA's number for this recall is 2024050001/2. This recall is an expansion of previous recall number 22V‑315.
Recall number 24V298000 · Recall details
Service brakes, hydraulic: power assist: vacuum
- What is wrong
- Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2006-2012 ML-Class, GL-Class, and R-Class vehicles. Please refer to MBUSA's recall report for specific vehicle model details. Moisture may accumulate and cause corrosion in the brake booster housing unit, which can result in reduced brake performance or brake failure.
- Risk
- Reduced brake performance or brake failure can increase the risk of a crash.
- Remedy
- Owners are advised not to drive their vehicles until the remedy has been performed. Dealers will remove the rubber sleeve, inspect the brake booster, and as necessary, replace the brake booster. All repairs will be performed free of charge. Owner notification letters were mailed June 30, 2022. Owners may contact MBUSA customer service at 1‑800‑367‑6372. MBUSA's numbers for this recall are 2022050014, 2022050015 2022090006, & 2022090007.
Recall number 22V315000 · Recall details
Air bags: frontal: driver side: inflator module
- What is wrong
- Mercedes-Benz USA, LLC. (MBUSA) is recalling certain model year 2009-2010 ML320 BlueTec 4Matic, GL320 BlueTec 4Matic and R320 CDI 4Matic, 2011 E350 Cabriolet and E550 Cabriolet, 2009-2011 ML350, ML350 4Matic, ML550 4Matic, ML63 AMG, and C63 AMG, 2010-2011 ML450 4Matic Hybrid, E350 Coupe, E350 4Matic, E550 Coupe, E550 4Matic, and E63 AMG, 2011-2012 GL350 BlueTec 4Matic and R350 BlueTec 4Matic, 2009-2012 GL450 4Matic, GL550 4Matic and R350 4Matic, 2007-2008 SLK280, SLK350, and SLK55 AMG, 2011-2014 SLS AMG Coupe, 2012 SLS AMG Cabriolet, 2013-2014 SLS AMG GT and SLS AMG GT Cabriolet, 2005 C230 Kompressor and C320, 2006-2007 C230, 2006-2011 C350, 2008-2011 C300 and C300 4Matic, 2010-2012 GLK350 and GLK350 4Matic and 2007-2008 Chrysler Crossfire vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to rupture.
- Risk
- In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
- Remedy
- MBUSA will their notify owners, and Fiat Chrysler will notify the affected Chrysler owners. Dealers for the respective brands will replace the driver's frontal air bag module, free of charge. This recall began November 2016. Mercedes-Benz owners may contact MBUSA customer service at 1‑800‑367‑6372 and Chrysler owners may contact Fiat Chrysler customer service at 1‑800‑853‑1403.
Recall number 16V081000 · Recall details
See all 3 recalls for the 2010 Mercedes-Benz ML350
Defect investigations
Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
EA21002
Technical service bulletins for the 2010 Mercedes-Benz ML350 86
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- Mercedes-Benz USA, LLC will provide an Extended Modification Warranty for each vehicle that has received...
- Repeat workshop visit for vehicle vibration while braking from 60MPH. NOTE: Although the symptom is...
- Clanking noise from the area of the speakers in the doors
- Single throttle lift-off clunking noise from the side shaft when moving off (audible at the outboard end)
- The sliding sunroof glass panel of the panoramic roof reverses during the closing process, either once or...
- Headlamp, front fog lamp leaky or fogged
- Headlamp, front fog lamp leaky or fogged
- Headlamps leaking or fogged
- Single throttle lift-off clunking noise from the side shaft when moving off (audible at the outboard end)
- Commissioning not possible after replacement of TRANSMISSION 722.9 or of electrohydraulic controller unit...
What 2010 Mercedes-Benz ML350 owners say
Most recent owner complaints, unedited.
Before the incident my Mercedes started to pull away from me each time I attempted to press the brakes. At times the when I would press the brakes nothing would happen at all as if I wasn’t pressing them at all. Well on the night of February 18,2022 I was coming around a curb and when I went to press the brakes, my Mercedes began to sway slightly but the brakes never kicked in. The result of the incident totaled my vehicle, took out two transformers and a light pole, and costed me a careless operation ticket, the storage and towing of the vehicle from the incident, to the tow yard, then back home, as well as paying the ticket and having to pay the dmv. There is still an unknown amount due to demco (the energy company) for the light pole, two transformers, after hours workers and the actual worked and labor they performed. The recall flyers hadn’t been mailed out until a few months after the wreck so I had no knowledge of the issues happening nor the fact that driving the vehicle could be detrimental.
Vehicle will not crank/start intermittently key turns in the ignition but nothing happens. Front door on the right and left will not operate and have to push down locks in order for vehicle to lock and prevent vehicle/ property theft.
I have reached out to Mercedes-Benz to have the 2 recalls fixed. They tell me I will receive a letter with instructions. I have not received any letters and it's been more than 6 months.
On February 18, 2022 at approximately 2240 hours I was in a wreck which totalled my 2010 Mercedes ML-350. I was approaching a curb and tried to brake but they didn't work and my vehicle pulled to the right and I totaled it out on an electricity pole. I was not aware of the recall 16V081 until September 04, 2022. My mercedes is currently under a tarp under my shed, and has been for months. Please explain the steps and procedures I need to follow to get my vehicle replaced because the damages to my vehicle as well as the transformers that blew, shutting off power in a 2 miles radius could have been fatal and I have since been without a vehicle.
The contact owns a 2010 Mercedes-Benz ML350. The contact stated while driving at 45-50 MPH, the brake pedal was depressed but failed to respond. The contact depressed the brake pedal harder and the vehicle stopped abruptly. There were no warning lights illuminated. The contact was able to continue driving. The vehicle was taken to an independent mechanic where it was diagnosed that no issues were found. The contact stated that the failure had been reoccurring while driving. The contact received recall notification of the federal safety agency Campaign Number: 22V315000 (Service Brakes, Hydraulic). However, the parts to do the recall repair were not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time to complete the recall repair. The contact stated that the manufacturer failed to provide vehicle rental assistance as advised in the recall notice. The manufacturer was made aware of the failure and followed up with the dealer, but the dealer failed to assist. The failure mileage was approximately 83,000. Parts distribution disconnect.
Without warning while in motion, on a country road, an alarm went off stating "return to workshop" turn signals stopped working, dashboard when blank (no speedometer working), SRS alarm and could not put the vehicle in park or neutral.
Tl* the contact owns a 2010 mercedes-benz ml350. The contact stated that the federal safety agency campaign number: 16v081000 (air bags) exceeded a reasonable amount of time for repair. The contact did not receive a recall notice. The contact reached out to the manufacturer in october of 2018 and was informed that the part was not available, and the contact would be notified when it was available. The dealer was not contacted. The contact had not experienced a failure. Parts distribution disconnect.
Tl* the contact owns a 2010 mercedes-benz ml350. The contact received notification of the federal safety agency campaign number: 16v081000 (air bags). The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. Mercedes-benz annapolis (324 6th st, annapolis, md 21403, (888) 261-7620) was contacted and confirmed that the parts were not available for the recall remedy. The manufacturer was made aware of the issue and was not able to confirm when the parts were to become available. The contact had not experienced a failure. The VIN was invalid. *bf
Takata recall - air bag still not available to be fixed. Would like to get this fixed!!
Compare the 2010 Mercedes-Benz ML350
Other model years
Questions about the 2010 Mercedes-Benz ML350
Is the 2010 Mercedes-Benz ML350 reliable?
Owners have filed 101 complaints about the 2010 Mercedes-Benz ML350, 1.5 times a typical ML350 model year.
What is the 2010 Mercedes-Benz ML350 year score?
The 2010 Mercedes-Benz ML350 scores 60 out of 100 (average). The score compares it with the other model years of the Mercedes-Benz ML350: 75 is a typical year, 50 means twice the usual complaints, and serious complaints and recalls lower it.
What is the most common problem with the 2010 Mercedes-Benz ML350?
Airbags, with 67 complaints, typically around 85,000 miles. Next is electrical (10).
How many recalls does the 2010 Mercedes-Benz ML350 have?
3 recalls, covering service brakes, hydraulic and air bags.
Was there a recall on the 2010 Mercedes-Benz ML350 airbags?
Yes, 1 recall: 16V081000. Check your VIN to see if your car still needs the free repair.
What year does the Mercedes-Benz ML350 have bad airbags?
The Mercedes-Benz ML350 model years with the most airbags complaints are 2010 (67 complaints) and 2011 (59 complaints).
VIN decoder
See the problems and recalls for an exact car
Buying a used 2010 Mercedes-Benz ML350?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history