My sequoia is sputering and not wanting to go when I press petal, at 40 MPH it does really funny and again about 60
The worst 2009 Toyota Sequoia problems
Ranked by number of owner complaints. Mileage and cost come from what owners wrote.
- Driver assistance2
- Acceleration1
- Body1
- Brakes1
- Electrical1
Problems by type
Tap a problem to see which part fails, at what mileage and in which other years.
- Driver assistance2
- Acceleration1
- Body1
- Brakes1
- Electrical1
- Engine1
- Fuel system1
Recalls 8
Steering: rack and pinion
- What is wrong
- Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2008-2022 Sequoia and 2007-2021 Tundra vehicles. The power steering gear assembly may have been manufactured incorrectly, which can result in an oil leak.
- Risk
- An oil leak may cause a sudden loss of power steering assist, increasing the risk of a crash.
- Remedy
- Dealers will inspect and replace the power steering gear assembly as necessary, free of charge. Owner notification letters were mailed on January 21, 2022. Owners may contact Toyota customer service at 1‑800‑331‑4331. Toyota's numbers for this recall are 21TB10 and 21TA10.
Recall number 21V920000 · Recall details
Seats: front assembly: seat heater/cooler
- What is wrong
- Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010 Corolla vehicles equipped with aftermarket accessory seat heaters with a copper strand heating element. The electrical wiring in the seat heaters may be damaged when the seat cushion is compressed.
- Risk
- If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
- Remedy
- SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1‑866‑405‑4226. SET number for this recall is SET16B.
Recall number 16V396000 · Recall details
Visibility: power window devices and controls
- What is wrong
- Toyota Motor Company (Toyota) is recalling certain model year 2009-2011 Tundra, Sequoia, Corolla, Corolla Matrix and Scion xB, 2008-2011 Highlander and Highlander Hybrid, 2007 Camry and Camry Hybrid, 2009 Camry and Camry Hybrid, 2006-2011 RAV4, 2006-2010 Yaris, and 2009-2010 Scion xD and Pontiac Vibe vehicles. During the manufacturing of the Power Window Master Switch (PWMS), grease lubricant may have been inconsistently applied to the sliding electrical contacts.
- Risk
- If the sliding electrical contacts are not protected by lubricant, debris and moisture that get into the switch may cause a short circuit and the switch assembly may overheat and melt, increasing the risk of a fire.
- Remedy
- Toyota will notify owners, and dealers will inspect the switch, applying a lubricant if no abnormality is found. If abnormality is found, the PWMS circuit board will be replaced, free of charge. The recall is expected to begin December 20, 2015. Owners may contact Toyota customer service at 1‑800‑331‑4331. Toyota's number for this recall is C0M.
Recall number 15V689000 · Recall details
Seats: front assembly: seat heater/cooler
- What is wrong
- Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion which may damage the seat heater wiring.
- Risk
- Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
- Remedy
- SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1‑866‑405‑4226.
Recall number 14V743000 · Recall details
Visibility: power window devices and controls
- What is wrong
- Toyota is recalling certain model year 2007-2009 Camry, Camry Hybrid, RAV4, Corolla, Corolla Matrix, Tundra, Sequoia, Highlander, Highlander Hybrid, Yaris, Scion xB, Scion xD and Pontiac Vibe vehicles. The power window master switch assemblies in some of these vehicles were built using a less precise process for lubricating the internal components of the switch assemblies. Irregularities in this lubrication process may cause the power window master switch assemblies to malfunction and overheat.
- Risk
- If the switch overheats, it may melt, possibly resulting in a fire.
- Remedy
- Toyota will notify its owners, and dealers will inspect the switch and apply a special grease that inhibits heat build up or replace any switch damaged by the defect, free of charge. Toyota owners that experience a problem with a switch should not attempt to make repairs, but should contact their Toyota dealer or the Toyota Customer Experience Center at 1‑800‑331‑4331. General Motors will contact the Pontiac Vibe owners affected by this recall and GM dealers will inspect and repair switches as necessary. Those owners may contact Pontiac Customer Care at 1‑800‑762‑2737.
Recall number 12V491000 · Recall details
Tires: pressure monitoring and regulating systems
- What is wrong
- Toyota is recalling certain model year 2008 through 2011 fj cruiser, land cruiser, tacoma, sequoia and tundra vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 138, "tire pressure monitoring system (TPMS)." when factory-installed wheels and tires were replaced with toyota authorized accessory wheels and lt tires prior to first sale, the tire pressure monitoring systems were not re-calibrated correctly and therefore do not start illuminating the low tire pressure warning telltale at the required minimum activation pressure.
- Risk
- Failure to warn of tire deflations is a non-compliance with fmvss 138 and could lead to tire failure increasing the risk of a crash.
- Remedy
- For the land cruiser, sequoia, tacoma and tundra vehicles, the dealer will re-calibrate the tire pressure monitoring system on affected vehicles and install an updated tire and loading information label at no charge. For the fj cruiser vehicles, the TPMS cannot be reset so the electronic control unit (ecu) for the TPMS will be replaced. Toyota is currently developing the remedy ecu. If an owner is not certain whether his or her vehicle is equipped with these accessories, please contact any toyota dealer for an inspection at no charge. The safety recall began on march 31, 2011. Owners may contact toyota at 1‑800‑331‑4331.
Recall number 11V148000 · Recall details
Equipment: other: labels
- What is wrong
- Gulf states toyota is recalling certain model year 2005-2010 vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold between september 1, 2005 and june 2, 2008 without the requisite load carrying capacity modification labels.
- Risk
- This does not meet the standard requirements.
- Remedy
- Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. Dealers will also correct the owner's manual. The safety recall began on may 27, 2010. Owners may contact gulf states toyota at 713‑580‑3300.
Recall number 10V035000 · Recall details
Vehicle speed control: accelerator pedal
- What is wrong
- Toyota is recalling certain model year 2005-2010 avalon, model year 2007-2010 camry, model year 2009-2010 corolla, corolla matrix, rav4, model year 2010 highlander, model year 2008-2010 sequoia, and model year 2007-2010 tundra vehicles. Due to the manner in which the friction lever interacts with the sliding surface of the accelerator pedal inside the pedal sensor assembly, the sliding surface of the lever may become smooth during vehicle operation. In this condition, if condensation occurs on the surface, as may occur from heater operation (without A/C) when the pedal assembly is cold, the friction when the accelerator pedal is operated may increase, which may result in the accelerator pedal becoming harder to depress, slower to return, or, in the worst case, mechanically stuck in a partially depressed position.
- Risk
- The accelerator pedal may become hard to depress, slow to return to idle, or, in the worst case, mechanically stuck in a partially depressed position, increasing the risk of a crash.
- Remedy
- Dealers will install a reinforcement bar in the accelerator pedal which will allow the pedal to operate smoothly. Gm will notify owners for the pontiac vibe please see 10v‑018. This service will be performed free of charge. The safety recall is expected to begin on february 5, 2010 and will be completed on march 15, 2010. Owners may contact toyota at 1‑800‑331‑4331.
Recall number 10V017000 · Recall details
Technical service bulletins for the 2009 Toyota Sequoia 197
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- Condition in which a musty odor is present
- Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical...
- To prevent brake rotor rust from forming during transportation and storage, wheel film will be used...
- The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix...
- Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal...
- Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad...
- Condition in which a musty odor is present
- This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for...
- Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal...
- This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life...
2009 Toyota Sequoia fuel economy
Official EPA estimates in miles per gallon (MPGe for electric). Ranges cover trims that share the same engine.
| Engine | Drive | City | Highway | Combined |
|---|---|---|---|---|
| 4.7L 8‑cyl | RWD | 14 | 17 | 15 |
| 5.7L 8‑cyl | RWD | 14 | 19 | 15 |
| 5.7L 8‑cyl | 4WD | 13 | 18 | 14-15 |
| 4.7L 8‑cyl | 4WD | 13 | 16 | 14 |
What 2009 Toyota Sequoia owners say
Most recent owner complaints, unedited.
Tl* the contact owns a 2009 toyota sequoia. The contact stated that there was rust on the frame and the frame was rotted out from the driver side tire and the surrounding area. The contact noticed spots where holes may start to develop throughout the frame. The contact called toyota of kalamazoo (5850 stadium dr, kalamazoo, mi 49009, (269) 375-1000) and was informed that the vehicle could not be repaired because the VIN was not included in a recall. The manufacturer was made aware of the failure and did not assist. The failure mileage was 120,000.
For the 2nd time in 4 years, the air intake pump/valves have malfunctioned. The first time it happened it was covered under toyota's extended warranty that covered this for 10 years/150,000 miles, whichever comes first. I just turned 156,000 miles, and toyota doesn't want to cover it- they also said even if I was under 150,000 miles they wouldn't cover it because they'll only cover the repair one time (unless it fails again within 1year of the repair). The repair costs $2,000+- and is obviously not a permanent fix. This is a design flaw that although related to emissions, can become a safety issue because the vehicle reduces its power to 50% once this error code is triggered. Consumers deserve a permanent fix or warranty for the life of the vehicle if this design flaw can't be corrected, either that or a repair cost that is significantly less than $2,000. This problem occurs when starting and operating- a check engine light comes on as well as other lights.
Tl* the contact owns a 2009 toyota sequoia. The contact stated that while driving at 35 MPH, the accelerator pedal became stuck causing an increase of speed up to 80 MPH. The brakes and traction control warning lights illuminated. The contact mentioned that the brake pedal had to be depressed continuously in order to stop the vehicle. The contact mentioned that the vehicle was previously repaired under the federal safety agency campaign number: 10v017000 (vehicle speed control). The vehicle was taken to the dealer. The technician diagnosed that the failure was due to the floor mat becoming stuck under the accelerator pedal. The manufacturer was made aware of the failure. The vehicle was not repaired. The failure mileage was 106,000. The VIN was not available. Updated 01/27/16*lj the consumer stated attempts to utilize the brake were met with a hard brake that appeared fully engaged into the floor board. The brake pedal finally released and the accelerator pedal began to return to its normal position and the vehicle stopped accelerating. Updated 02/09/16
My car has run well until this past spring. I could drive it with no problems, but then go to get in it and it would not start. I have had the gas tank cleaned, fuel pump replaced, fuel filter replaced, back in a second time and the "fuel line was kinked" from last repair. Happened again and they thought it might be the key reading wrong, used spare key, happened again and started when the tow truck got there. Happened again and I didn't bother calling. Happened again and I am pissed!!! Now being told it is probably the key, but since they cannot recreate the problem and the computer does not show error readings, they are giving up. Ridiculous!! Shopping for a ford.
For the past 3 years, my vsc, ABS, brakes and check engine lights came on twice. The first time, the car was under warranty and the dealer replaced the on-board computing unit (about $3000). The second time (last week), the dealer replace the same unit again but I am paying $1400 because the car is no longer under warranty. This is very scary as the vehicle looses power all of the sudden.
Compare the 2009 Toyota Sequoia
Sequoia vs Chevrolet TahoeSequoia vs Ford ExpeditionSequoia vs Chevrolet SuburbanSequoia vs GMC YukonSequoia vs Nissan Armada
Other model years
2001200220032004200520062007200820092010201120122013201420152016201720182019202020212022
Questions about the 2009 Toyota Sequoia
Is the 2009 Toyota Sequoia reliable?
Owners have filed 6 complaints about the 2009 Toyota Sequoia, fewer than a typical Sequoia model year.
What is the 2009 Toyota Sequoia year score?
The 2009 Toyota Sequoia scores 84 out of 100 (good). The score compares it with the other model years of the Toyota Sequoia: 75 is a typical year, 50 means twice the usual complaints, and serious complaints and recalls lower it.
What is the most common problem with the 2009 Toyota Sequoia?
Driver assistance and stability, with 2 complaints. Next is acceleration (1).
How many recalls does the 2009 Toyota Sequoia have?
8 recalls, covering steering, seats and visibility.
What year does the Toyota Sequoia have the most driver assistance problems?
The Toyota Sequoia model years with the most driver assistance complaints are 2002 (252 complaints), 2003 (194 complaints) and 2001 (171 complaints).
What gas mileage does the 2009 Toyota Sequoia get?
Official estimates for the 2009 Toyota Sequoia range from 14 to 15 mpg combined. The most efficient version (4.7L 8-cyl, RWD) gets 14 city and 17 highway.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2009 Toyota Sequoia?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history