Rear wheels cambering rubbing on shock absorbers.
The worst 2000 Toyota Sienna problems
Ranked by number of owner complaints. Mileage and cost come from what owners wrote.
Problems by type
Tap a problem to see which part fails, at what mileage and in which other years.
- Engine68
- Transmission67
- Body52
- Tires41
- Brakes39
- Locks36
- Seat belts21
- Acceleration20
- Electrical17
- Visibility15
- Suspension14
- Airbags6
- Seats6
- Steering6
- Wheels6
- Fuel system5
- Lights4
Specific symptoms reported on the 2000 Toyota Sienna
Door locks 26ABS 18Transmission failure 17Check engine light 15Tire blowout 12Engine failure 11Seat belt 10Grinding brakes 9Pulling 9Stalling 7Brake failure 6Sudden acceleration 5Whining noise 5Won't start 5
Recalls 1
Structure
- What is wrong
- Toyota is recalling certain model year 1998 through 2010 sienna passenger vehicles manufactured between august 7, 1997 and january 4, 2010, currently registered in or originally sold in connecticut, delaware, illinois, indiana, kentucky, maine, maryland, massachusetts, michigan, minnesota, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, washington district of columbia, virginia, west virginia, and wisconsin. The subject vehicles are equipped with the spare tire stowed under the vehicle. If the vehicle is operated in the cold climate regions of the united states where road salt is frequently used, water splashed backwards with high concentrations of road salt can reach the spare tire carrier and corrode the spare tire carrier assembly cable.
- Risk
- The cable may break due to excessive corrosion and the spare tire may separate from the vehicle, possibly resulting in a vehicle crash.
- Remedy
- Toyota will notify owners with an interim letter initially instructing them to bring their vehicle to authorized dealers to inspect for corrosion. A second notice will be sent when the permanent remedy is available. For more information, please see toyota's amended recall report of july 19, 2010. The safety recall is expected to begin on october 12, 2010. Owners may contact toyota at 1‑800‑331‑4331.
Recall number 10V160000 · Recall details
See all 1 recalls for the 2000 Toyota Sienna
Defect investigations
Engine seizure
DP02004
Steering wheel to return to center
There is no summary currently available
PE99070
Technical service bulletins for the 2000 Toyota Sienna 114
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical...
- To prevent brake rotor rust from forming during transportation and storage, wheel film will be used...
- The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix...
- Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal...
- Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad...
- Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal...
- This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life...
- Obsolete notice
- Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN...
- The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master...
2000 Toyota Sienna fuel economy
Official EPA estimates in miles per gallon (MPGe for electric). Ranges cover trims that share the same engine.
| Engine | Drive | City | Highway | Combined |
|---|---|---|---|---|
| 3.0L 6‑cyl | FWD | 16 | 22 | 19 |
What 2000 Toyota Sienna owners say
Most recent owner complaints, unedited.
I had my car's brake lines replaced at McGee Toyota in Hanover MA on June 20, 2023. On July 19, 2023, my wife and I had just exited the interstate, and were stopping at a grocery store on our way home. I tried to brake upon entering the parking lot and the brake pedal sank to the floor. There was no resistance when I tried pumping the brakes. Fortunately, I was traveling at a slow speed and there were no moving cars in the lot, so I was able to safely stop the car without an accident. I had the car towed to McGee for repairs and the next day was told the catastrophic brake failure was due to a defective part. Since this would likely have had much more serious consequences such as serious injuries or worse if the failure occurred on the exit ramp or at the busy state highway intersection in front of the grocery store, I wanted to report it to be sure it doesn't happen to someone else.
I have a 2000 Sienna with 305000 miles. I have never had trouble with this vehicle until about 2 weeks ago. When I am stopped and my car is in drive, I just tap the gas pedal for a second and the engine RPM will increase to about 2000 RPM and will stay there until I put the car in neutral or turn the engine off. This is a problem because my breaks barely hold this and I must put the car into neutral for the car to stop pulling forward. Putting the car into neutral resets the rpm. If there is no car in front of me, I can release the brakes and the vehicle will continue to accelerate until the transmission switches to second gear, at this point I can drive normally. One time the vehicle continued to accelerate even after switching gears, I put the vehicle into neutral and the engine went to over 4000 RPM, the brakes could not stop the vehicle, I had to turn the engine off. The gas pedal is not sticky or stuck, floor mats are not in the vehicle. I can rev the engine normally when I am in park, this only happens when I am in gear. I have checked the Throttle Body, Throttle Position Sensor and disabled the cruise control module, I can see no reason for this to happen. I have seen many complaints about this same issue online but have not found a resolution. I can buy an ECM but this is an expensive trial. I will take it to the dealer from here.
Tl* the contact owns a 2000 toyota sienna. When the ignition was started, the vehicle started to accelerate and moved forward without shifting into drive. The contact depressed the brake pedal and applied the emergency brake, but both failed to stop the vehicle. The contact was able to stop the vehicle by shifting into neutral gear. There were no warning indicators illuminated. The vehicle was not diagnosed or repaired. A dealer and the manufacturer were not notified. The failure mileage was 210,581.
The engine leaks oil at valve covers. They have been replaced. Still leaks. And a lot of sludge builds up= on pump screen. Blew engine!! Had engine replaced. Same thing happening. I am on social security. &3 and can not afford thousands on this vehicle.. Please help@+!!
Outer door handles on doors of sienna are extremely brittle and break easily even with normal everyday gentle use. Of the 4 main doors on my toyota sienna, 3 of them now have broken ousise handles causing the doors not to be accessible & opened from the outside. This has now affected both sliding doors and my passenger front door. My passenger sliding door is not even able to be opened from the inside since the outer handle broke off completely. This poses a major safety issue as doors are not able to be opened from the outside in case of an accident or emergency. Additionally the fact that the passenger sliding door can not even be opened from the inside causes even more of a safety issue. Upon reviewing other consumers who own this same vehicle I have found it alarming that well over 50% of them have complaints due to this same issue.
Tl* the contact owns a 2000 toyota sienna. While driving approximately 30 MPH, the vehicle accelerated on its own. The vehicle did a stop and go action that occurred every time the vehicle moved. The contact had to place the vehicle in neutral in order to stop it completely. The manufacturer and dealer were not notified. The vehicle was not diagnosed or repaired. There were no recalls on the vehicle. The failure mileage was 200,000.
Tl* the contact owns a 2000 toyota sienna. While the ignition was off and the vehicle was parked, the vehicle rolled away independently. Once the vehicle was stopped, the gear shifter was still in the park position. The vehicle was taken to an independent mechanic, but the failure could not be duplicated. The manufacturer was not notified of the failure. The VIN was invalid. The failure mileage was approximately 200,000.
Tl* the contact owns a 2000 toyota sienna. The contact stated that both rear doors failed to securely lock and suddenly opened while driving various speeds. The contact took the vehicle to the della toyota dealer where it was diagnosed that the latch assembly and another part associated with the latches (the contact was unable to recall) failed and needed to be replaced. The vehicle had not been repaired. The manufacturer was made aware of the failure and stated that the vehicle was not covered by a recall. The VIN was unknown. The approximate failure mileage was 180,000.
Yesterday afternoon, I was driving on a semi busy road in tucson, arizona at about 40 MPH and the van suddenly began to accelerate. I immediately thought I had hit the cruise control button but the dash showed no indication that this was case. I repeatedly pushed the cruise control button and jiggled the lever arm hoping to toggle something off but it had no effect. I began to push the breaks but they were not capable of slowing the car below about 25. I threw the van into neutral and the engine revved up to about 7000 RPM. That sound concerned me so I threw it back into gear and the van began to accelerate again. I pushed the emergency breaks, and with my pedal break fully compressed I could get the car to 5-10 MPH but there was absolutely no way to stop the van. After narrowly missing a pedestrian, I turned right, found a place to pull off to the side of the road, threw the van into neutral and quickly turned the van off. With the engine turned off the breaks were as effective as the should have been so the the van came to a stop. After a brief period I turned the key, started the van and, again, the engine again revved to 7000 RPM. I turned it off again. I pumped the accelerator several times before starting it again and it started up fine. I had the van towed after this and I'm not likely to drive it again.
Compare the 2000 Toyota Sienna
Sienna vs Chrysler Town and CountrySienna vs Dodge Grand CaravanSienna vs Honda OdysseySienna vs Chrysler PacificaSienna vs Kia Sedona
Other model years
1996199719981999200020012002200320042005200620072008200920102011201220132014201520162017201820192020
Questions about the 2000 Toyota Sienna
Is the 2000 Toyota Sienna reliable?
Owners have filed 363 complaints about the 2000 Toyota Sienna, 2.0 times a typical Sienna model year.
What is the most common problem with the 2000 Toyota Sienna?
Engine and cooling, with 68 complaints, typically around 81,000 miles. Next is transmission (67).
How many recalls does the 2000 Toyota Sienna have?
1 recall, covering structure.
What year does the Toyota Sienna have bad engine?
The Toyota Sienna model years with the most engine complaints are 2000 (68 complaints), 2004 (58 complaints) and 2007 (56 complaints).
What gas mileage does the 2000 Toyota Sienna get?
Official estimates for the 2000 Toyota Sienna range from 19 mpg combined. The most efficient version (3.0L 6-cyl, FWD) gets 16 city and 22 highway.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2000 Toyota Sienna?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history