Some vehicles may experience the CHECK ENGINE LIGHT ON with DTC P2610 and P2507 stored inmemory after...
Mazda technical service bulletin 01-003-19-3557 for 2014-2019 Mazda MAZDA3, 2013-2019 Mazda CX-5 and 2014-2019 Mazda MAZDA6 and others.
- Bulletin number
- 01-003-19-3557
- Component
- Engine
- Summary
- Some vehicles may experience the CHECK ENGINE LIGHT ON with DTC P2610 and P2507 stored inmemory after engine start and room fuse 15A (A) removed. P2610:00: Instrument cluster internal engine off timer performance problem P2507:00: PCM battery voltage low input As a past malfunction, the customer will not notice it (no warning light illuminated), but the DTC may be found during a vehicle service. P2507 in this situation is only applicable on 2016 and later models. This is caused by the engine being started 3 or more times after a short duration of engine off (less than 15 seconds) with the room fused removed. NOTE: The odometer will display "F0-002" during transport mode (room fuse 15A removed). Transport mode is canceled when room fuse 15A is installed or the vehicle odometer is more than 12.4mi (20km). Vehicles in dealer inventory with this concern should be repaired using the following repair procedure.
Owners of these vehicles have filed 825 complaints in the engine category.
Vehicles covered
VIN decoder
See the problems and recalls for an exact car
Buying a used Mazda MAZDA3?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history