Check engine light and automatic transaxle warning light ON with one or more of these DTCs stored in the...
Mazda technical service bulletin 05-004-19-3466 for 2012-2018 Mazda MAZDA3, 2013-2019 Mazda CX-5 and 2014-2019 Mazda MAZDA6 and others.
- Bulletin number
- 05-004-19-3466
- Component
- Power train
- Summary
- Some vehicles may experience the check engine light and automatic transaxle warning light ON with one or more of these DTCs stored in the TCM memory (P0842, P0847, P0872, P0877, P0780, P1738). P0842:00 - Oil pressure switch No. 1 (oil pressure switch B) stuck on P0847:00 - Oil pressure switch No. 2 (oil pressure switch A) stuck on P0872:00 - Oil pressure switch No. 3 (oil pressure switch A) stuck on P0877:00 - Oil pressure switch No. 4 (oil pressure switch B) stuck on P0780:00 - Gear shifting malfunction P1738:00 - Automatic transaxle internal malfunction This is caused by the oil pressure switch A and/or B at the control valve body temporarily or permanently getting stuck due to contamination entering the passage. To correct the problem, some mass production changes have been implemented to reduce contamination and improve the DTC diagnostic logic. NOTE: If the vehicle also has a delayed engagement concern, this TSB is not applicable. Refer to the instructions on MGSS (SLOW ENGAGING AFTER OPERATING SELECTOR LEVER FROM N TO D POSITION [FW6A-EL/FW6AX-EL]) or (SLOW ENGAGING AFTER OPERATING SELECTOR LEVER FROM N TO D POSITION [EW6A-EL/EW6AX-EL]) for proper diagnosis and repair procedure.
Owners of these vehicles have filed 411 complaints in the transmission category.
Vehicles covered
VIN decoder
See the problems and recalls for an exact car
Buying a used Mazda MAZDA3?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history