The Brake Pedal consistently malfunctions, even after the replacement of the master cylinder (by independent service center). The master cylinder does not hold pressure due to a faulty ABS control unit (which, when Mazda was contacted, said that part was on backorder until September). If the manufacturer knows this is an issue and can't supply the part due to so many replacements needed in their vehicle, why is there no recall? There is no warning to the driver on the dashboard of this issue and has causes repeated issues while breaking.
The worst 2013 Mazda MAZDA3 problems
Ranked by number of owner complaints. Mileage and cost come from what owners wrote.
Problems by type
Tap a problem to see which part fails, at what mileage and in which other years.
- Lights36
- Electrical32
- Transmission18
- Brakes15
- Body11
- Engine11
- Seats9
- Steering9
- Airbags7
- Seat belts6
- Visibility3
- Acceleration2
- Driver assistance2
- Fuel system2
- Wheels2
- Suspension1
Specific symptoms reported on the 2013 Mazda MAZDA3
Recalls 1
Structure: body: hatchback/liftgate
- What is wrong
- Mazda North American Operations (Mazda) is recalling certain model year 2010-2013 Mazda3 and Mazdaspeed3 vehicles manufactured November 18, 2008, to June 8, 2013, 2012-2015 Mazda5 vehicles manufactured October 26, 2010, to June 22, 2015, 2016 CX-3 vehicles manufactured June 1, 2015, to December 26, 2015, and 2013-2016 CX-5 vehicles manufactured December 15, 2011, to December 26, 2015. On the affected vehicles, the lift gate support struts may corrode, possibly causing the struts to break and/or the lift gate to drop unexpectedly.
- Risk
- If the lift gate falls unexpectedly, it may hit the user, increasing their risk of injury.
- Remedy
- Mazda dealers will replace the both lift gate supports, free of charge, however parts are not currently available. The recall began April 2017. Owners may contact Mazda customer service at 1‑800‑222‑5500. Mazda's number for this recall is 9916H.
Recall number 16V644000 · Recall details
See all 1 recalls for the 2013 Mazda MAZDA3
Defect investigations
Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
EA21002
Technical service bulletins for the 2013 Mazda MAZDA3 505
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- This bulletin supersedes the previously issued bulletin(s) listed below
- Description
- This bulletin supersedes the previously issued bulletin(s) listed below
- This SA supersedes the previously issued SA(s) listed below
- This Service Alert supersedes the previously issued SA listed below: The changes are noted in Red....
- If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...),...
- A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating
- Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging
- There have been warranty claims submitted for growling or bearing whine noise in differentials, transfer...
- For improvement of electrical diagnosis, the SKYACTIV® Wiring Terminal Test Kits has been delivered all...
What 2013 Mazda MAZDA3 owners say
Most recent owner complaints, unedited.
There seems to be a lot of people who own 2012 and 2013 Mazda 3 Sedans (with SKYACTIV-G 2.0L and Halogen Type Headlights) that are dealing with the same issue I am dealing with myself. I have just purchased a used 2013 Mazda 3 with Skyactive Technology and I noticed that when I was braking the headlights would pulse on and off and would continue while I braked. I have been told there is a TSB on this issue (attached) and Mazda is well aware of this happening. This concern is caused by inadequate alternator output controlled by the PCM when the battery is under a heavy load. They are to the point now of charging people for a doing the TSB on the car that is causing the problem of the alternator not producing the proper wattage to support both the headlights and the brake lights at the same time. There are numerous online forum entries that speak of this issue with 2012 and 2013 Mazda 3's. I am very concerned that my headlights may stop working which could result in my death or the death of my occupants of my vehicle not to mention the other motorists on the road around me if my head lights were to eventually fail at night due to lack of proper wattage to the headlights. There are videos on you tube that show these pulsing headlights on Mazda's. I believe that headlights are important enough safety issue that their failing could result in death if the headlights completely failed due to the known fault in these vehicles over time.
Transmission Control Module malfunction. The AT light came on and the car made a jerking motion and a clunking noise. It lost power and would not shift which is very dangerous in moving traffic. It put me at risk for getting hit by another vehicle not expecting the abrupt change in speed by my vehicle. The check engine light is now lit up. There were no warning lights before the vehicle’s transmission malfunctioned. A code came up on the vehicle when tested. U0101 lost communication with TCM. From what I have read, researched, and have been told this issue is very common for certain years of Mazda 3’s including mine.
The contact owns a 2013 Mazda Mazda3. The contact received notification of the federal safety agency Campaign Number: 16V644000 (Structure) however, the part to do the recall repair was not yet available. The local dealer was contacted, and the contact was informed that the part for the recall repair was not yet available. The manufacturer was made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
All my seatbuckels are tearing. I thought it could of been my dog, but I a certain I did not give up my seat or let him drive. My driver side is also tearing. I noticed the buckle catching when securing it, and now it has moved past snag and had a quarter inch tear that it catches on. The buckle is not wide enough for the belt. The belt is no longer able to constraint as good as when it was whole. Unknown
After filing up the gas tank, there is a strong smell of fuel coming from the car. It remains strong until the tank is run down to about 3/4. Gas can be seen dripping down the tank under the car. Gas drips are clearly visible on the ground. This has been an ongoing problem for approximately two years.
Steering becomes unpredictable and stiff accompanied by surging and loss of power. Check engine light comes on. Code P0882
ABS Module suddenly start failing causing brake sinks down. Almost crashed because of it. It appears to be a very common issue but Mazda still does not recall these ABS modules made by Ford/ATE. Also, it does not show any ABS warning light, which might be why not many people have called on this as they probably thought it was normal. There is all sort of communication error codes if you read with a OBDII scanner. In fact, Ford had a recall for these ABS modules, citing "stuck or slow-responding valves due to reaction with brake fluid".
I had the dashboard recalled and replaced. The new dashboard is separating from the computer screen on dash.
Tracking number 11461728 added information email from manufacture mitsubushi electric incorporated
Compare the 2013 Mazda MAZDA3
MAZDA3 vs Ford FocusMAZDA3 vs Honda CivicMAZDA3 vs Toyota CorollaMAZDA3 vs Volkswagen JettaMAZDA3 vs Hyundai ElantraMAZDA3 vs Nissan SentraMAZDA3 vs Chevrolet CruzeMAZDA3 vs Subaru Impreza
Other model years
20042005200620072008200920102011201220132014201520162017201820192020202120222023202420252026
Questions about the 2013 Mazda MAZDA3
Is the 2013 Mazda MAZDA3 reliable?
Owners have filed 117 complaints about the 2013 Mazda MAZDA3, close to a typical MAZDA3 model year.
What is the 2013 Mazda MAZDA3 year score?
The 2013 Mazda MAZDA3 scores 75 out of 100 (average). The score compares it with the other model years of the Mazda MAZDA3: 75 is a typical year, 50 means twice the usual complaints, and serious complaints and recalls lower it.
What is the most common problem with the 2013 Mazda MAZDA3?
Lights, with 36 complaints, typically around 45,995 miles. Next is electrical (32).
How many recalls does the 2013 Mazda MAZDA3 have?
1 recall, covering structure.
What year does the Mazda MAZDA3 have the most lights problems?
The Mazda MAZDA3 model years with the most lights complaints are 2013 (36 complaints), 2012 (31 complaints) and 2010 (23 complaints).
VIN decoder
See the problems and recalls for an exact car
Buying a used 2013 Mazda MAZDA3?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history