The AT light came on the dash, added transmission fluid because it was a little low but the light still has not gone off. I think there is an electrical problem within the transmission. It's had shifting issues since purchasing this vehicle. I also have a small child that comes with me to work and I do not want my car to catch on fire while we are in this vehicle.
The worst 2010 Mazda MAZDA3 problems
Ranked by number of owner complaints. Mileage and cost come from what owners wrote.
Problems by type
Tap a problem to see which part fails, at what mileage and in which other years.
- Body169
- Visibility109
- Seats106
- Wheels54
- Electrical50
- Tires48
- Transmission40
- Brakes38
- Engine31
- Steering31
- Airbags26
- Lights23
- Acceleration15
- Driver assistance13
- Fuel system7
- Seat belts7
- Suspension6
- Locks3
Specific symptoms reported on the 2010 Mazda MAZDA3
ABS 29Headlights 19Power steering loss 14Jerking 13Tire blowout 12Check engine light 9Sunroof shattered 9Airbag light 8Brake failure 7Loss of power 7Stalling 7Steering lock-up 7Fire or smoke 6Sudden acceleration 6Won't start 6
Trouble codes owners of the 2010 Mazda MAZDA3 mention
C0020 4U0140 2U0415 2
Recalls 3
Seats
- What is wrong
- Mazda North American Operations (Mazda) is recalling certain 2011 Mazda2 and 2010-2011 Mazda3 and Mazdaspeed3 vehicles equipped with a manual seat lifter. In the affected vehicles, the seat height adjustment lifter links may break or detach from the seat frame and the seat angle may incline causing the driver to not be able to maintain an appropriate driving position.
- Risk
- If the driver cannot maintain an appropriate driving position, there is an increased risk of a crash.
- Remedy
- Mazda will notify owners, and dealers will inspect the seat lifter links and install a reinforcement bracket to the lifter links, or replace the entire seat adjuster unit, free of charge. The recall began April 7, 2017. Owners may contact Mazda customer service at 1‑800‑222‑5500. Mazda's number for this recall is 0917B.
Recall number 17V082000 · Recall details
Structure: body: hatchback/liftgate
- What is wrong
- Mazda North American Operations (Mazda) is recalling certain model year 2010-2013 Mazda3 and Mazdaspeed3 vehicles manufactured November 18, 2008, to June 8, 2013, 2012-2015 Mazda5 vehicles manufactured October 26, 2010, to June 22, 2015, 2016 CX-3 vehicles manufactured June 1, 2015, to December 26, 2015, and 2013-2016 CX-5 vehicles manufactured December 15, 2011, to December 26, 2015. On the affected vehicles, the lift gate support struts may corrode, possibly causing the struts to break and/or the lift gate to drop unexpectedly.
- Risk
- If the lift gate falls unexpectedly, it may hit the user, increasing their risk of injury.
- Remedy
- Mazda dealers will replace the both lift gate supports, free of charge, however parts are not currently available. The recall began April 2017. Owners may contact Mazda customer service at 1‑800‑222‑5500. Mazda's number for this recall is 9916H.
Recall number 16V644000 · Recall details
Electrical system
- What is wrong
- Mazda is recalling 25,400 my 2010 mazda3 vehicles. A clearance between the engine harness and the housing of starter motor may be insufficient. Due to this, the covering of the harness may be damaged through vibration during operation possibly causing a short-circuit between certain harness wires and the starter housing. A short-circuit can result in engine control malfunction and/or poor shift quality.
- Risk
- The main fuse may blow out causing the engine to stall and inability of restart, increasing the risk of a crash.
- Remedy
- Dealers will have the engine harness inspect and add a protector clip on the affected section of the harness. If necessary, the harness will be repaired. This service will be performed free of charge. The recall is expected to begin on may 6, 2009. Owners may contact mazda at 1‑800‑222‑5500.
Recall number 09V126000 · Recall details
See all 3 recalls for the 2010 Mazda MAZDA3
Defect investigations
Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
EA21002
Technical service bulletins for the 2010 Mazda MAZDA3 292
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- This bulletin supersedes the previously issued bulletin(s) listed below
- Description
- Product Quality Information (PQI) DESCRIPTION Service Information MT-041/12 is no longer valid
- This bulletin supersedes the previously issued bulletin(s) listed below
- This SA supersedes the previously issued SA(s) listed below
- This Service Alert supersedes the previously issued SA listed below: The changes are noted in Red....
- If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...),...
- A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating
- Exterior trim heat damage such (melted, separating, etc.) when parked near a glass building or Low-E windows
- When replacing the SiriusXM satellite radio unit, a call must be made to inform SiriusXM of the existing...
What 2010 Mazda MAZDA3 owners say
Most recent owner complaints, unedited.
my girlfriend had bought a car from a dealership in Pennsylvania and the car is registered in Pennsylvania at a dealer called premier world wide auto sales. when she had bought the car all four of the tires i believe should have failed pa safety inspection and the owner of this shop keeps telling me that they pass one hundred percent even though the tires have signs of dry rot all the way around all four tires and would not stop giving me problems and trying to prove me wrong the dot codes show that the tires in the front were 10 years of age and the rear tires at 8 years of age and showing signs of dry rot the tire size all around is 205/55r16 and this is completely unacceptable for a business that has been operating for as long as its been operating because all i can think about is how many other cars has this dealership sold with dry rotting tires nor did they show my girlfriend when she bought the car any of the work that had been done by the shop that had done the inspection prior she was told that everything on this car was great and that there weren't any issues when infact that was not the case i found a leak coming from an engine oil pressure sensor and a cv axle boot torn and flinging grease along with the tires with none of this being disclosed to my girlfriend who bought the car shortly after
the federal safety agency Complaint Narrative I am filing this complaint regarding a 2010 Mazda 3, VIN [XXX] . The vehicle experiences intermittent transmission control failures, including difficulty shifting out of first gear and warning indicators triggered by vibration. The transmission and transmission control module have already been replaced. The dealership has identified the wiring harness as the cause of the remaining failure. Mazda North American Operations has confirmed that the required wiring harness (BBM9-67-020H) is discontinued and unavailable. However, Mazda has not provided a written determination of whether the known wiring harness recall (engine wiring harness chafing affecting control systems) applies to this VIN, nor confirmed recall completion history. Mazda has advised the customer to seek aftermarket or salvage parts, but has not provided an approved repair remedy or goodwill assistance despite the issue affecting drivability and safety. I am requesting that the federal safety agency review whether Mazda has met its obligations regarding: 1.recall applicability determination by VIN, and 2.providing an adequate remedy when OEM repair parts are no longer available for a safety-related defect. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
See attached document for complaint.
I have reason to believe the dealership I bought my vehicle from rolled back my odometer. Upon checking my carfax information, 12/01/24, the odometer read 161,142, which the dealership did own my vehicle at this time. When I bought this car in April of 2025, the odometer was reading 130,000.
On August 15, 2025, my 2010 Mazda 3 began displaying the ABS warning light intermittently while driving. The ABS system is a critical safety feature, and when the light comes on, I am unsure if the braking system will function properly in an emergency. I scanned the vehicle using a Foxwell diagnostic tool and retrieved the following ABS-related fault codes: C0020:1C-2B – ABS Pump Motor Control Circuit U0425:62-60 – Invalid Data Received from IPC/ABS Control Module U0140:00-28 – Lost Communication with Body Control Module These issues are consistent with Mazda Technical Service Bulletin 04-002/13 (July 17, 2013), which documents ABS pump motor failures caused by poor motor brush contact. This is a serious safety concern because the ABS system fails without warning, leaving the driver and passengers at risk of brake loss in critical conditions. Why this should be investigated: The defect occurs intermittently, making it difficult to predict or reproduce. It matches a known documented defect acknowledged by Mazda in TSB 04-002/13. Other owners have reported similar ABS pump failures in Mazda vehicles of this generation. The failure compromises safe braking and should be treated as a safety defect warranting investigation and possible recall. Action Requested: I am requesting that the federal safety agency investigate this recurring ABS pump/motor failure in 2010 Mazda 3 vehicles and determine whether a recall should be issued to address this known defect.
The a.b.s pump module is defective in these vehicles. There are tons of people having issues with them. When they fail it happens suddenly resulting in brake failure, power steering failure, the car does not like to shut off, the vehicle will go into "limp mode" and every light on the dash comes on. The part itself is costing close to $1000 u.s.d . With all of tge effected things tgat go with it i believe it can be very dangerous and should be recalled
This vehicle is subject to recall #: 17V‑082 referring to a drivers seat lifter link than can break. My car has a broken lifter link, was brought to the dealership and instead of replacing the entire seat adjuster unit like the recall states, they simply installed a reinforcement bracket. When brought back to Med Center Mazda they state it has already been repaired and therefore cannot be repaired again. The vehicle still has a broken seat lifter link.
Transmission slipping. Not shifting correctly.
I purchased two tires from Les Schwab in Molalla, OR on 1/15/25 in which upon them changing the tires they damaged one of my TPMS sensors and they did not replace it. I didn't have a warning light before I went in and now I do and they knowingly did not replace it when TPMS sensor service was part of purchasing the new tires. Instead they quoted me $451.96 to replace the sensors in all 4 tires other than replaced the one they broke. A set of TPMS sensors online cost $28, this is unethical of them to take advantage of consumers like this and they should be held accountable. If I'm not mistake it says in "49 USC 30122(b)" that "Prohibition.-A manufacturer, distributor, dealer, rental company, or motor vehicle repair business may not knowingly make inoperative any part of a device or element of design installed on or in a motor vehicle or motor vehicle equipment in compliance with an applicable motor vehicle safety standard prescribed under this chapter unless the manufacturer, distributor, dealer, rental company, or repair business reasonably believes the vehicle or equipment will not be used (except for testing or a similar purpose during maintenance or repair) when the device or element is inoperative." 205/55 R16
Compare the 2010 Mazda MAZDA3
MAZDA3 vs Ford FocusMAZDA3 vs Honda CivicMAZDA3 vs Toyota CorollaMAZDA3 vs Volkswagen JettaMAZDA3 vs Hyundai ElantraMAZDA3 vs Nissan SentraMAZDA3 vs Chevrolet CruzeMAZDA3 vs Subaru Impreza
Other model years
20042005200620072008200920102011201220132014201520162017201820192020202120222023202420252026
Questions about the 2010 Mazda MAZDA3
Is the 2010 Mazda MAZDA3 reliable?
Owners have filed 686 complaints about the 2010 Mazda MAZDA3, 5.9 times a typical MAZDA3 model year. It is one of the years we flag to avoid.
What is the 2010 Mazda MAZDA3 year score?
The 2010 Mazda MAZDA3 scores 10 out of 100 (poor). The score compares it with the other model years of the Mazda MAZDA3: 75 is a typical year, 50 means twice the usual complaints, and serious complaints and recalls lower it.
What is the most common problem with the 2010 Mazda MAZDA3?
Body and structure, with 169 complaints, typically around 49,000 miles. Next is visibility (109).
How many recalls does the 2010 Mazda MAZDA3 have?
3 recalls, covering seats, structure and electrical system.
Was there a recall on the 2010 Mazda MAZDA3 body?
Yes, 1 recall: 16V644000. Check your VIN to see if your car still needs the free repair.
What year does the Mazda MAZDA3 have the most body problems?
The Mazda MAZDA3 model years with the most body complaints are 2010 (169 complaints), 2012 (17 complaints) and 2011 (13 complaints).
VIN decoder
See the problems and recalls for an exact car
Buying a used 2010 Mazda MAZDA3?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history