2012 Buick Lacrosse problems

What is wrong

General Motors, LLC (GM) is recalling certain 2010-2013 Buick Lacrosse, 2012-2013 Buick Regal, and 2013 Chevrolet Malibu vehicles sold or ever registered in Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, or Wisconsin. These vehicles may have rear toe links that received an improper amount of electrocoating (e-coat) corrosion protection, which could cause the e-coat to become brittle and break away when contacted by road debris. Over time, the e-coat may chip away, exposing the metal toe link and making it more susceptible to corrosion. Corrosion may eventually cause the toe link to thin and ultimately fracture.

Risk

A rear toe link fracture may reduce the driver's ability to control the vehicle, increasing the risk of a crash.

Remedy

Dealers will replace the rear suspension toe links and adjuster fasteners, free of charge. Owner notification letters were mailed January 27, 2022. Owners may contact Buick customer service at 1‑800‑521‑7300 or Chevrolet customer service at 1‑800‑222‑1020. GM's number for this recall is N212346640. This recall is an expansion of the federal safety agency recalls 20V‑764 and 21V‑633.

Recall number 21V00F000 · Recall details

What is wrong

General Motors, LLC (GM) is recalling certain 2012-2013 Buick Regal, 2013 Chevrolet Malibu, and 2010-2013 Buick Lacrosse vehicles sold or ever registered in Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, or Wisconsin. These vehicles may have rear toe links that received excessive electrocoating (e-coat) corrosion protection, which could cause the e-coat to become brittle and break away when contacted by road debris. Over time, the e-coat may chip away, exposing the metal toe link and making it more susceptible to corrosion. Corrosion may eventually cause the toe link to thin and ultimately to fracture.

Risk

A rear toe link fracture may reduce the driver's ability to control the vehicle, increasing the risk of a crash.

Remedy

GM will notify owners, and dealers will replace the rear suspension toe links and adjuster fasteners free of charge. Parts are not currently available. Owners were mailed an interim notification on January 27, 2021, and April 15, 2021. A third notification was mailed on August 19, 201. Owners may contact Buick customer service at 1‑800‑521‑7300 or Chevrolet customer service at 1‑800‑222‑1020. GM's number for this recall is N202308930.

Recall number 20V764000 · Recall details

What is wrong

General Motors LLC (GM) is recalling certain model year 2011-2012 Buick LaCrosse, Regal and Chevrolet Camaro, as well as certain 2010-2012 Cadillac SRX, Chevrolet Equinox and GMC Terrain vehicles, equipped with power height adjustable driver and passenger seats. In the affected vehicles, the bolt that secures the driver's and passenger's power front seat height adjuster may fall out causing the seat to drop suddenly to the lowest vertical position.

Risk

If the driver's seat unexpectedly drops, the distraction and altered seat position may affect the drivers' control of the vehicle, increasing the risk of a crash.

Remedy

GM will notify owners, and dealers will replace the height adjuster shoulder bolts, free of charge. The manufacturer distributed interim letters to owners on September 11, 2014. The recall began on December 26, 2014. Owners may contact GM customer service at 1‑800‑521‑7300 (Buick), 1‑800‑458‑8006 (Cadillac), 1‑800‑222‑1020 (Chevrolet), or 1‑800‑462‑8782 (GMC). GM's number for this recall is 14271.

Recall number 14V447000 · Recall details

What is wrong

General Motors (GM) is recalling certain model year 2012 and 2013 Buick LaCrosse and Regal, and model year 2013 Chevrolet Malibu Eco vehicles equipped with eAssist. These vehicles may have a condition in which the Generator Control Module (GCM) may not function properly. This could cause a gradual loss of battery charge and the illumination of the malfunction indicator light.

Risk

If the vehicle is continued to be driven, the engine may stall and/or the vehicle may not start. In addition, there may be a burning or melting odor, smoke, and possibly a fire in the trunk.

Remedy

GM will notify owners and dealers will test the GCM and replace it, as necessary, free of charge. The recall began on June 11, 2013. Owners may contact GM at 1‑800‑521‑7300. GM's recall campaign number is 13136.

Recall number 13V173000 · Recall details

What is wrong

Gm is recalling certain model year 2012 buick lacrosse passenger vehicles manufactured from june 9, 2011, through july 2, 2011, for failing to conform to the requirements of federal motor vehicle safety standard no. 126, "electronic stability control systems (ESC)." the stabilitrak system has an incorrect calibration that may cause the system to not properly detect if a sensor were to malfunction, and the warning light indicating that the system is not operating would not illuminate, as required in the safety standard.

Risk

The improper diagnosing may cause the ESC to falsely activate, resulting in sudden changes in vehicle handling and deceleration, particularly at higher speeds, which may cause the driver difficulty in maintaining the vehicle's desired path of travel and desired vehicle speed, and could result in a crash without warning.

Remedy

Gm dealers will reprogram the electronic brake control module free of charge. The safety recall began on september 12, 2011. Owners may contact buick at 1‑866‑608‑8080.

Recall number 11V404000 · Recall details

the federal safety agency opened AQ14-001 to determine whether Sands Chevrolet of Surprise, Arizona complied with the requirements of the National Traffic and Motor Vehicle Safety Act, 49 U.S.C. Chapter 301 (Safety Act) and its implementing regulations. The Safety Act requires, among other things, that a manufacturer notify its dealers of defects related to motor vehicle safety and non-compliances with Federal Motor Vehicle Safety Standards and, in turn, that a dealer not sell and deliver a new vehicle subject to a recall unless the recall remedy has been performed (49 U.S.C. ?? 30112(a), 30120(i)).the federal safety agency issued an information request (IR) letter to Sands Chevrolet on May 5, 2014.Sands Chevrolet responded to this request on May 22, 2014.To ensure the federal safety agency?s information request encompassed all possible reference codes for General Motors recall 13V‑173, the federal safety agency issued another IR letter to Sands Chevrolet on June 8, 2015.Again, a response letter was received on June 9, 2015.the federal safety agency?s investigation indicated that Sands Chevrolet did sell and deliver recalled vehicles that did not have the recall remedy completed at the time the vehicles were delivered to the customers.the federal safety agency therefore concluded that Sands Chevrolet was liable for civil penalties for violations of the Safety Act, pursuant to 49 U.S.C. ? 30165.Under a Settlement Agreement dated March 24, 2016, Sands Chevrolet represented that it improved its processes to verify that it checks every vehicle for recalls prior to delivery to the purchaser and that it has not sold and delivered any unremedied new motor vehicles since June 9, 2015.Sands Chevrolet also represented that it now also checks for open recalls on every customer vehicle brought in for service, and that it checks for open recalls on every used trade-in vehicle, regardless of make or model, and takes steps to have all used trade-in vehicles repaired prior to retail sale. Sands Chevrolet admitted to violating the law and must pay civil penalties in the amount of $40,000.This Audit Query is closed.

AQ14001

On July 5, 2013 the Office of Defects Investigation (ODI) opened Recall Query RQ13-003 to investigate whether the service procedures utilized in recall bulletins 13136 and 13142 for safety recall 13V‑173 were sufficient to identify the safety defect in the subject vehicles.These safety recalls were issue on May 3, 2013 to address the improper function of the Generator Control Module (GCM) in certain model year (MY) 2012-13 Buick LaCrosse and Regal and MY 2013 Chevrolet Malibu Eco equipped with eAssist.This condition may result in a loss of battery charge, engine stall and/or inability for the vehicle to start.In severe cases it may also lead to odor, smoke and possibly a fire in the trunk.During discussions with General Motors (GM), ODI was informed that the subject vehicles could be separated into 4 distinct build populations, or groups. Group A contained vehicles built from the start of production through 3/19/2012.Group B involved vehicles built from 3/20/2012 to 8/20/2012, group C from 8/21/2012 to 12/31/12, and group D from 1/1/2013 onwards.Bulletin 13136 instructed dealers to inspect and, if necessary, replace the GCM for vehicles in groups A or C.Bulletin 13142 instructed dealers to replace the GCM of any vehicle in group B.Group D vehicles were not recalled.All eAssist vehicles have a Powerpack which contains a BAS (belt alternator-starter) Power Inverter Module (BPIM)/Accessory Power Module (APM) and a 115-V Lithium-Ion battery.The Powerpack is known by GM's Part Description System as the GCM and Battery Module. The BPIM/APM contains 3 multi-layered printed circuit boards (PCBs) comprised of conductive layers separated by isolating layers.Vehicles built within the time periods of groups A and B had PCBs using single isolation layers.Vehicles build in group C had dual isolation layers on 1 of the 3 PCBs, and group D had all 3 PCBs built with dual insulation.Adding dual insulation to a PCB makes it more robust to material and manufacturing variations, and ultimately less susceptible to an electrical short circuit and subsequent failure.Through initial analysis of the GCM failures, GM identified that vehicles within group B contained PCBs that were contaminated during production due to increased production volumes that resulted in inadequate quality control.GM also noted that GCM failures occurred early in the life of the vehicle (typically <1000 miles).Therefore a service procedure was developed to replicate early life failures by subjecting the GCM to high current loads which would cause the identified failure mechanism (copper migration) to occur quickly and reveal any underlying PCB defect.Although groups A and C were built with PCBs containing single layer PCBs, they were built using better quality control, and as the data supports, experienced significantly lower failures.GM advised that for these reasons the two different service procedures were used in the Recall 13V‑173 population.In response to ODI's Information Request (IR) GM submitted 234 unique reports related to the alleged problem. It was noted that 197 (84%) of the received reports fell into the group B population.The 2 fire incidents noted were events in which flames were evident and/or damage was experienced outside of the GCM. Both of these incidents involved group B vehicles. One hundred four warranty claims were also submitted in response to the IR, with 96 claims (92%) from group B.It was also noted that none of the claims from groups A or C occurred after the service procedure was conducted, and that the majority of the A or C incidents occurred during the service procedure.Given the data, ODI believes the ser

RQ13003