On October 23, 2024, my 2016 Chevrolet Suburban was stopped in a line of traffic on a downhill. As traffic began to move forward, the brakes failed to hold, despite pressure on the brake pedal. This resulted in a low-speed collision with the vehicle in front, which then impacted another vehicle. Component/System: The braking system failed to engage despite pressure on the brake pedal. The vehicle is a total loss; however, documentation of the damage is available through my insurance company, New Jersey Manufacturers, claim number 2024-884575, and the police report from the accident scene. Safety Risk: This brake failure posed a significant safety risk to my family (who were occupants), and other drivers. The collision caused substantial vehicle damage. Confirmation: The vehicle has not been inspected by a dealer or independent service center due to it being a total loss. It has been inspected by my insurance company. Inspection: The vehicle has been inspected by police at the accident scene and by my insurance company. Warnings: There were no prior warning lamps, messages, or symptoms of brake problems. The vehicle has been consistently maintained by All American Chevrolet with all recommended services performed. This incident raises serious concerns about the vehicle's braking system integrity, especially given its consistent professional maintenance. I request an investigation into this matter.
2016 Chevrolet Suburban: brake failure
7 of the 220 complaints about the 2016 Chevrolet Suburban describe brake failure.
- owner complaints
- 7
- of this car's complaints
- 3%
- typical mileage
- 57,000
- recalls
- 1
Brake failure by model year
What owners say
Power brake failure as described in the federal safety agency 19V645 and 20V603. The problem and solution is identified by CHEVROLET Special Coverage bulletin N182202780-01 (October 11, 2019): BRAKE ASSIST DECREASE DUE TO VACUUM LOSS. Dealer CONCORD CHEVROLET (CA) would not recognize the Special Coverage Bulletin or fix the problem. CHEVROLET was notified and has not agreed to repair (case#9-8126430790).
Tl* the contact owns a 2016 chevrolet suburban. The contact stated that the vehicle experienced brake failure while driving at low speeds. No warning light was illuminated. The vehicle was not yet taken to a dealer however, davis gainesville chevrolet (2600 n main st, gainesville, fl 32609, (352) 519-4131) was contacted and informed of the failure. An appointment was schedule. The manufacturer was not made aware of the failure. The failure mileage was approximately 50,000. *bf the consumer stated the vehicle was repaired.
Rollling down my drive way my brakes went out. Very spongy. Pressed multiple times and was able to come to a stop with the help of my front bushes. Master cylinder is full brakes are less than a year. I see online that this is a problem with 2014-2018 chevy trucks and suvs. If my wife was driving she could have been hurt. Heaven forbid my kids where in there too. This is obviously a defect in manufacturing and design and should be remedied by chevy.
Tl* the contact owns a 2016 chevrolet suburban. While driving low speeds, the brakes failed. The contact had to use force when depressing the brake pedal to stop the vehicle. Also, the check engine warning indicator illuminated. The vehicle was not diagnosed or repaired. The dealer and manufacturer were not made aware of the failure. The failure mileage was 200,000.
Brake failure at speeds below 5 MPH. Usually when backing into a parking space. Had to replace failed vacuum pump and hose to fix
Tl* the contact owns a 2016 chevrolet suburban. While driving 30 MPH, the vehicle failed to accelerate. Also, the brakes failed to respond when the brake pedal was depressed and the vehicle stalled. The failure recurred two more times. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failures. The approximate failure mileage was 14,000.
Service bulletins that may apply
Related recalls
Service brakes, hydraulic: power assist: vacuum
- What is wrong
- General Motors LLC (GM) is recalling certain 2015-2017 Cadillac Escalade, 2014-2018 Chevrolet Silverado, GMC Sierra, 2015-2018 Chevrolet Suburban, Tahoe, GMC Yukon vehicles. The amount of vacuum created by the vacuum pump may decrease over time.
- Risk
- As the vacuum level drops, the brake assist decreases, increasing braking effort, extending the distance required to stop the vehicle, thereby increasing the risk of a crash.
- Remedy
- GM will notify owners, and dealers will reprogram the Electronic Brake Control Module, free of charge. The recall began October 8, 2019. Owners may contact Chevrolet customer service at 1‑800‑630‑2438, Cadillac customer service at 1‑800‑458‑8006 or GMC customer service at 1‑800‑462‑8782. GM's number for this recall is N192268490.
Recall number 19V645000 · Recall details
Questions about the 2016 Chevrolet Suburban brake failure
Is brake failure a common problem on the 2016 Chevrolet Suburban?
7 of 220 owner complaints about the 2016 Chevrolet Suburban (3%) mention brake failure. The model year with the most reports is 1994.
Is there a recall or service bulletin for this on the 2016 Chevrolet Suburban?
There is 1 recall and 46 service bulletins for the same area of the car. Check them below with your VIN.
Other symptoms on the 2016 Chevrolet Suburban
Transmission failure 22Check engine light 11Spongy pedal 11Stalling 10Jerking 8Loss of power 7Shudder 7ABS 5Power steering loss 5
VIN decoder
See the problems and recalls for an exact car
Buying a used 2016 Chevrolet Suburban?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history