2006 Ford Fusion: engine stalls while driving

Filed Aug 21, 2017 · Engine · 60,000 miles · AR · fire

Tl* the contact owns a 2004 (na) ford fusion. While driving the vehicle, smoke appeared and the vehicle stalled. The vehicle caught fire without warning. A police report was not filed and there were no injuries. The fire department extinguished the fire. The contact previously called a local dealer (crain ford of little rock located at 4601 colonel glenn plaza drive 72116 501‑542‑6041) stated that the parts for the repair were on backorder. The manufacturer was not notified of the failure. The failure mileage was 60,000.

Filed Mar 31, 2017 · Electrical · 114,000 miles · FL

Tl* the contact owns a 2006 ford fusion. While driving 15 MPH, the turn signals became inoperable and the engine stalled. The vehicle was able to restart. The vehicle was taken to an independent mechanic where it was diagnosed that the smart junction box failed and needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was approximately 114,000.

Filed Jan 15, 2016 · Acceleration, Engine · 110,000 miles · DE

While reversing out of my parking spot at work the other day, the car completely stalled while my foot was on the gas pedal. I was thankful that no one was behind me because the car completely shut down. I put it in park and restarted it easily, but I was too nervous to drive on a highway after the incident, as there was no indication the first time that the car was going to shut down. I drove down a country road with my flashers on until I got to a safe place where I could call my husband. While I waited for him to come get me, I kept the car in idle and ran the heater. The car shut down again, and this time I was able to take a picture of the warning lights that accompanied the failure. (see attached.) the dash said "check charging system" and the oil, emissions, and battery lights came on. We called and had it towed to a local shop but man there has no idea what the problem is and told us to tow it to the dealership. My car has over 100,000 miles, but I have had trouble with it since I bought it. I have had mechanics tell me that the electrical system does not work well. I have also had them tell me that it is normal for the air-conditioner in these cars to just turn on randomly to cool the engine, which mine does frequently. Moreover, the battery in the car now is the third one I've had. Brake lights burn out constantly, and the transmission makes terrible noises when I start the car and particularly when I reverse. This new problem of stopping unexpectedly is simply unacceptable. I hate to give up my fusion because when it's running correctly, it's a great car; however, this last instance is just too dangerous. If I were on the highway, I could have been killed. This same thing has happened to friends of mine who owned fords. I will be calling ford and asking them about throttle body and PCM problems that others have noted in their complaints.

Filed Jan 6, 2016 · Engine · 159,070 miles · WI

Tl* the contact owns a 2006 ford fusion. While driving at various speeds, the vehicle stalled and the check engine light and electronic throttle control warning indicators illuminated on the instrument panel. The vehicle was taken to the dealer where it was diagnosed that the electronic throttle body failed and needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was 159,070.

Filed Oct 27, 2015 · Electrical · 101,000 miles · IA · fire

Tl* the contact owns a 2006 ford fusion. The contact stated that while driving at 5 MPH, the vehicle suddenly stalled without warning. The vehicle was towed to the dealer. The dealer stated a remote starter that was previously installed burned a fuse. The fuse was replaced, but the turn signals failed. The dealer stated that the smart box needed to be replaced. The vehicle was repaired. The manufacturer was not made aware of the failure. The failure mileage was 101,000. The VIN was not available.

Filed Nov 19, 2014 · Airbags, Engine · MA

When driving on the highway and roadway, such as bridges this summer, my vehicle stalled several times, lost power coming almost to a complete stop, putting my family and I at risk. When I pressed on the gas to accelerate, the engine begin to race, causing the "check engine light" to come on. It also jerked and skidded as I tried to maneuver the steering. To avoid accidents on these occasions, the vehicle had to be pulled over and subsequently, parked. Highway driving was also avoided most of the summer for safety and concern. There is also an issue with the front driver side airbag, as recent as this summer, the seal became distorted, twisted and cracked in the dashboard. Lastly, about 2 weeks ago, the rear door lock on the driver side no longer works, the door must be opened manually from the inside of the car. These are valid vehicle defects and safety issues and ford must step up and do the right thing for all parties of interest.

Filed Oct 15, 2014 · Transmission · 35,700 miles · CA

I was trying to accelerate to merge on to the freeway. My 2006 ford fusion refused to respond. The revs went up to 4000 RPM and the car just stayed there going very slowly. After a few seconds, it jerked forward, so I pulled back on the side of the road and let the "tantrum" past. I've had several close calls since-- the most scary one occurring in stop-and-go traffic. When accelerating after slowing down, the fusion will rev up and creep slowly forward until one removes one's foot from the gas pedal and allow it to settle back in gear. Luckily, I've avoided being rear-ended by fast approaching cars. Recently, ford cleaned the throttle body and charged $232.00, I still have the same problem and am still waiting for a recall on this vehicle. Incidentally, the stalling also happens after making a right or left hand turn.

Filed Jun 6, 2014 · Electrical · 124,000 miles · TN

Tl* the contact owns a 2006 ford fusion. The contact stated that while traveling 60 MPH, smoke entered the vehicle from the front panel vents underneath the hood. The contact stated that the engine warning light illuminated on the instrument panel and the vehicle began to stall intermittently. The failure occurred on three separate occasions. The vehicle was taken to a dealer where it was diagnosed that the power control module needed to be replaced. The vehicle was not repaired. The failure mileage was 124,000 and the current mileage 124,030. Updated 08/19/14*lj updated 8/30/2017

Filed May 5, 2014 · Acceleration · 134,000 miles · AR

Tl* the contact owns a 2006 ford fusion. The contact stated that while traveling 60 MPH, the vehicle stalled. The vehicle was taken to the dealer who stated that the throttle actuator needed to be replaced. The failure mileage was 134,000 and the current mileage was 137,000.

Filed Mar 6, 2014 · Acceleration, Electrical · 90,189 miles · IL

Tl* the contact owns a 2006 ford fusion. The contact stated that while driving 60 MPH, the vehicle stalled as the traction control warning light illuminated. The contact coasted onto the shoulder and was able to restart the engine and resume normally. The dealer performed a diagnostic which located the failure at the throttle. The vehicle was repaired. The computer system and the throttle body was replaced. The manufacture was made aware of the failure. The failure mileage was 90,189 and the current mileage was 97,000.

Filed Feb 12, 2014 · Transmission · 106,300 miles · NC

Coming off an exit ramp at approx. 35 MPH I felt a jerking/stalling feeling as I merged into freeway traffic where the speed limit is 65 MPH. I viewed my instrument panel and found the wrench symbol illuminated. Acceleration was sluggish briefly, but after awhile acceleration seemed to return to norm. All the while the wrench light remained illuminated for an approx. 25 miles. Once in a safe location I turned the car off and waited approximately two minutes before attempting to restart it. Upon restarting the wrench light was no longer illuminated. I drove the car another approx. 10 miles to make it home and the wrench light is no longer illuminated when car is restarted. This all took place in the midst of a snow/sleet storm. A drive that typically takes approx. 45 minutes took approx. 4 hours. I called the service department of my local ford dealership and understandably I found that they had closed and reopening the next day was/is in question due to the weather.

Filed Dec 27, 2013 · Electrical, Engine · 102,000 miles · PA

Tl* the contact owns a 2006 ford fusion. The contact stated that while traveling approximately 70 MPH, the vehicle hesitated as the engine light illuminated. The vehicle then stalled and failed to restart. The vehicle was taken to a private mechanic where it was found that the main computer and ignition coil failed. The vehicle was being repaired. The manufacturer was contacted about the failure. The failure mileage was approximately 102,000...updated 02-04-14 *bf ..