2016 Ford Fusion: engine stalls while driving

Filed May 14, 2026 · Steering · TX

I took my car to have recalls fixed. The next time I drove it after that my power steering shut off while driving. The warning lights for "Hill Start Assist Not Available" and "Service AdvanceTrac" came on. After some research it looks like I have the exact problem for recall 19S26. However when I called the dealership they couldn’t find the documentation if they fixed this or not on my vehicle. They said since it is not an open recall they do not have to fix it. Can you please open/reopen this recall for my vehicle so I can address this specific issue.

Filed May 5, 2026 · Engine · 175,000 miles · VA

The contact owns a 2016 Ford Fusion. The contact stated that while driving at various speeds engine had overheated causing the vehicle to stall. The vehicle was taken to the local mechanic who was unable the determine the exact cause of the failure. The contact was informed of the manufacturer extend coverage regarding the engine coolant inside the engine cylinders. The vehicle was not yet repaired. The manufacturer and local dealer were notified of the failure but no assistance was offered. The failure mileage was 175,000.

Filed Jan 8, 2026 · Driver assistance, Engine · 138,000 miles · NC

The contact owns a 2016 Ford Fusion. The contact received notification of the federal safety agency Campaign Number: 25V695000 (Back Over Prevention). While driving at an undisclosed speed, the vehicle started running rough. The check engine warning light was illuminated. The vehicle was taken to an independent mechanic who retrieved DTC: P0302 (Misfire in Cylinder #2). The vehicle was taken to another independent mechanic, who retrieved the same code and informed the contact that cylinder #2 ignition coil and spark plug needed to be replaced. The vehicle was repaired. While driving, there was white smoke coming from the tailpipe, but the vehicle was still running rough. The engine overheated, and the contact pulled over and added additional fluids to the engine. The vehicle was taken to the local dealer, where it was diagnosed with coolant intrusion, and the engine needed to be replaced. The vehicle was not repaired. The contact obtained an extended warranty, but the claim was denied due to not meeting the mileage requirements. While driving at 35 MPH, the vehicle stalled. The vehicle was towed to the residence. The manufacturer was not notified of the failure. The approximate failure mileage was 138,000.

Filed Aug 28, 2025 · Electrical · IN

I was driving on the expressway. My car Went into limp mode it didn’t stall completely out, but I was not able to accelerate any eventually the wheel became tight. every light came on.. I made it safely off the expressway. My car would not start the ODB port is not reading. I’ve taken it to several mechanics all of them say that it’s my PCM. They said my PCM needs to be reprogrammed. There’s currently an active recall from my exact car but when I search my vin It tells me I have no active recalls.

Filed Aug 5, 2025 · Engine · 70,000 miles · TX

The contact owns a 2016 Ford Fusion. The contact stated that while stopped in traffic or at a red traffic light on several occasions, on the way to an independent mechanic, the vehicle stalled. The contact stated that the vehicle was able to restart on each occasion after several attempts. The check engine warning light was illuminated. The contact stated that upon taking the vehicle to the independent mechanic and turning the vehicle off, the vehicle failed to restart. The mechanic diagnosed that the unknown sensor parts needed to be replaced. The vehicle was repaired, but the failure reoccurred a few months later. The vehicle was taken to the same independent mechanic on three occasions, where a tune-up was completed, and unknown parts were replaced; however, the failure persisted. The vehicle was taken to a dealer, where it was diagnosed with coolant intrusion into the cylinder due to a crack in the engine block. The dealer determined that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was approximately 70,000.

Filed Jul 10, 2025 · TN

When in reverse the backup camera glitches sometime, it doesn’t even come on. There’s a knocking under the hood. I’ve been told that is the fuel pump . After getting gas and trying to turn the ignition back on it stalls, it takes sometimes 3 to 4 tries before getting it started. After having repairs done to brakes, tires, and more, the ABS light is still on and sometimes the brakes act like they don’t wanna stop. I only have a picture where the camera is not working. It’s glitching. I’ve taken it to shops, but forgot to get the invoice to know in reference to everything else that’s going on. I haven’t made any repairs yet that’s in the works.

Filed Feb 6, 2025 · Engine · 110,000 miles · IL

The contact owns a 2016 Ford Fusion. The contact stated that while driving at various speeds, the vehicle occasionally stalled and hesitated to restart. An unknown warning light was illuminated. The vehicle was taken to a local independent mechanic where the canister purge valve was replaced several times however, the failure reoccurred. The vehicle was taken to a local dealer where the canister purge valve was replaced, and the engine was flushed. The vehicle was repaired out of pocket; however, the failure reoccurred. In addition, the vehicle was taken to a local service center where it was scanned. The manufacturer was made aware of the failure. The failure mileage was approximately 110,000.

Filed Jan 17, 2025 · Engine, Fuel system · SC

The canister purge valve in this vehicle repeatedly goes bad. I had a 2015 and now 2016 both with the same issue. It throws the check engine light on and will just about die everytime putting gas into the car or when stopped for random periods of time. The vehicle uses more gas and you can literally smell the fumes escaping from the flapping gas tank lid. In order to start the car you have to pump the gas petal and occasionally the car will stall out while driving.

Filed Jan 8, 2025 · Engine · OH

Engine failed while driving on the highway due to a known defect with a coolant leak into the engine. My safety, and the passengers that were in the auto were put into danger when the engine malfunctioned due to the fact that we were on the highway, traveling at 65-70 mph, when the car suddenly started shaking, emitting white smoke from the exhaust and eventually stalling and not drive able. The only indicator that came on was the check engine light. There was no low coolant light to indicate that the auto was low or leaking coolant. There was no messages or codes to indicate a low coolant level in the car. The vehicle has been inspected and diagnosed by my a certified mechanic.

Filed Jan 3, 2025 · Engine · 82,700 miles · NC

The contact owns a 2016 Ford Fusion. The contact stated while driving at undisclosed speeds, the engine was misfiring, causing the vehicle to stall occasionally. No warning lights were illuminated. The contact became aware that the coolant level was abnormally low. The contact stated that the vehicle was scheduled to be towed to be diagnosed. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 82,700.

Filed Dec 23, 2024 · Engine · 145,330 miles · WA

Unknown, but believe that is it coolant leak related as the vehicle has been losing coolant. We have been needing to fill with coolant. The fan was running occasionally. The vehicle has no power. This is dangerous because the vehicle could have shut off while driving. The vehicle has not yet been seen by the dealership but will been getting an appointment to do so. There were no warning lights or any other warnings.

Filed Nov 13, 2024 · Engine · 77,000 miles · KY

The contact owns a 2016 Ford Fusion. While the contact’s son was operating the vehicle, the vehicle failed to accelerate as needed, with white smoke coming from the exhaust. The contact stated that the vehicle started shaking before the vehicle stalled. The vehicle was restarted and later driven to the local dealer, who diagnosed the vehicle and determined that there was coolant inside the engine cylinders. The contact was informed that the engine needed to be replaced. The vehicle was not yet repaired. The manufacturer was notified of the failure, but no assistance was provided. The failure mileage was 77,000.