1997 Ford Windstar problems

What is wrong

Ford is recalling model years 1995-2003 windstar, 2000-2003 excursion diesel, 1993-1997 and 1999-2003 f-250 sd through f-550 sd diesel, 1992-2003 e-150 through e-550, 1995-2002 explorer, 1997 and 2002 mercury mountaineer, 1995-1997 and 2001-2003 ranger, and 1994 f53 vehicles equipped with the texas instruments speed control deactivation switch (scds). The scds may leak internally and then overheat, smoke, or burn.

Risk

A vehicle fire could occur with or without the engine running.

Remedy

Ford will notify owners that dealers will install a fused wiring harness in line with the scds. On 1999-2003 windstar vehicles with a leaking scds, dealers will also inspect the ABS control module connector and repair as necessary. Repairs will be completed free of charge. The safety recall began on october 27, 2009. Owners may contact ford at 1‑888‑222‑2751.

Recall number 09V399000 · Recall details

What is wrong

On certain minivans originally sold in or currently registered in the states of connecticut, delaware, illinois, indiana, iowa, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, west virginia, and wisconsin, and in the district of columbia. The front coil springs could fracture as a result of corrosion. Depending on the location of the fracture, a broken spring could move past the spring seat and contact a front tire.

Risk

Some tires have deflated due to contact with a broken spring.

Remedy

Dealers will install protective shields around the front coil springs. Owner notification began september 6, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ford at 1‑800‑392‑3673.

Recall number 01V199000 · Recall details

What is wrong

Vehicle description: mini vans, light pickup trucks, and sport utility vehicles. Off lease canadian vehicles equipped with daytime running lights which meet canadian requirements and not the photometric requirements of fmvss 108, "lamps, reflective devices, and associated equipment." according to ford, the vehicles were imported into the u.s. Erroneously.

Risk

The light given off from the daytime running lights is brighter than allowed by u.s. Standards.

Remedy

Dealers will be advised to deactivate the running light function and to complete any outstanding safety recalls on these vehicles.

Recall number 00V168000 · Recall details

What is wrong

Vehicle description: minivans. The brake fluid master cylinder is recessed and oriented in the engine compartment so that the brake fluid warning statement embossed on both the top of the filler cap and the side of the reservoir body are not entirely visible by direct view. These vehicles may not fully comply with requirements of fmvss no. 135, "passenger car brake systems."

Remedy

Owners will be provided with new labels and installation instructions.

Recall number 99V147000 · Recall details

What is wrong

Vehicle description: passenger vehicles equipped with ax4s automatic transaxles. The low/intermediate servo cover can separate from the transaxle while the vehicle is being driven. If this occurs, transmission fluid will leak contacting the catalytic converter.

Risk

The catalytic converter temperature may be hot enough to ignite the transmission fluid and cause a vehicle fire.

Remedy

Dealers will inspect the transmission and replace these servo covers.

Recall number 97V097000 · Recall details

Ea08-021 is closed with ford's actions in recall 09v‑399 recalling approximately 4.5 million vehicles equipped with texas instruments speed control deactivation switches (scds).with this recall ford has now recalled all of the approximate 16 million ford model vehicles that were manufactured from my 1992 through 2003 with a texas instruments scds.the federal safety agency will continue to monitor the recalled vehicles to ensure remedies installed by ford tomitigate the potential for scds related fires are effective.the agency reserves the right to take further action if warranted by the circumstances.see attached closing report for further details.

EA08021

Odi has received 134 consumer complaints, 285 manufacturer complaints, and 137 manufacturer warranty claims alleging incidents of engine compartment fire in model year (my) 1995 thru 2003 ford windstar vehicles.two of the odi complaints allege the fires caused structural damage to the complainant's home.of the 134 odi complaints, 36 allege the fire occurred while the vehicle was parked, 72 allege the fire occurred while the vehicle was running and 26 of the complaints do not specify if the vehicle was running or not.further review of the odi complaints shows that 72 allege that the speed control deactivation switch (scds) caused the fire and 10 allege that the scds leaked brake fluid on to the ABS module resulting in the fire.there were 52 that did not identify a cause or that identified miscellaneous other causes.odi has also received 89 complaints ( not counted in this resume) alleging that the scds developed a brake fluid leak.thirteen of these complaints say that the leak at the scds resulted in braked fluid reaching the ABS module.this pe has been upgraded to an engineering analysis (ea) to further evaluate the cause of the fires and assess the scope, frequency, and safety consequences of the alleged defect.

PE08035

The subject vehicles range in age from 4?7 years in service, with average mileages estimated to range from 50 to 100 thousand miles.at these mileages, the subject wheels are likely to have been removed and reinstalled multiple times for various service procedures.odi is concerned about the high wheel separation rates in the my 1997-98 windstar vehicles equipped with aluminum alloy wheels.however, analysis of failure data indicates that most of the incidents in that population of vehicles occur after the vehicles had accumulated 30 thousand miles of service. The factors that increase the risk that inadequate clamp loads may be achieved during service-related wheel installation are not unique to the subject vehicles.testing conducted by ford and vrtc indicate that the my 1998 windstar aluminum wheel fastening system performs similar to the wheel fastening systems on peer minivans.no design or manufacturing defects were identified in the wheel fastening systems of the subject vehicles. Ford will send a mailing to owners of windstar vehicles with aluminum wheels that have high wheel separation rates that reviews the appropriate wheel fastening procedures and states that the wheel nuts should be tightened to the nominal torque, 100 ft-lbs (136 nm), and re-tightened to the same torque after 500 miles.ford?s letter also states that it is ?a good practice to be sure that before installing the wheel the aluminum wheel mounting surface, wheel lug nut area, and the mounting flange are free from dirt, debris, and loose rust to ensure the wheel is seated correctly and the wheel lug nuts remain fully tightened.? Odi will continue to monitor the incidence of wheel fastener failures in the subject vehicle population.accordingly, this investigation is closed.the closing of this investigation does not constitute a finding by the federal safety agency that a safety-related defect does not exist.the agency will take further action if warranted by the circumstances. For additional information, see the attached closing report.

EA03004

There is no summary currently available

EA00027

There is no summary currently available

PE00024

There is no summary currently available

EA99020