2018 GMC Sierra 1500: misfire or rough idle

Filed Jun 11, 2026 · Engine, Transmission · AR

Vehicle Details: 2018 GMC Sierra 1500 Z72 4x4, 5.3L V8 EcoTec3 engine, VIN: [XXX] Mileage at time of incident: 220,000 miles Location: [e.g., Little Rock, Arkansas area or specific road/highway – please provide if desired] What happened: The 5.3L V8 engine’s hydraulic roller lifters failed. One or more lifters collapsed, stuck, or lost proper oil pressure/operation. This led to improper valvetrain function, causing loud ticking/knocking noises, cylinder misfires, significant loss of engine power and performance, and internal engine damage (such as camshaft lobe wear or related components). Component or system that failed or malfunctioned: Hydraulic valve lifters (camshaft followers) in the engine valvetrain, associated with the Active Fuel Management (AFM) system. The failed lifter(s) and related components are available for inspection upon request. How safety was put at risk: The engine malfunction resulted in sudden or progressive power loss and misfiring while driving. This reduced the vehicle’s ability to accelerate or maintain speed, especially in traffic or on highways, creating a hazardous situation that put my safety and the safety of other road users at risk of collision or breakdown. No accident or injuries occurred , or other symptoms prior to the failure with details recall, e.g., ticking noise timeline, misfires Has the problem been reproduced or confirmed by a dealer or independent service center? “Yes, confirmed by shop inspection” Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? [Yes] Additional notes: Repair estimate is approximately $20,000 (likely due to extent of internal damage requiring major engine work or replacement). This failure aligns with a well-documented issue in GM 5.3L engines equipped with AFM. Vehicle status parked INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Filed Jan 29, 2026 · Engine · 150,000 miles · TX

The contact owns a 2018 GMC Sierra 1500. While starting the vehicle, it was shaking violently, with reduced power. The vehicle was restarted and worked as designed. Upon research, the contact associated the failure with the federal safety agency Action Number: PE25001 (Engine and Engine and Cooling). The vehicle was taken to an independent mechanic who determined there was metal in the engine, and there was a misfire coming from cylinder #2. The mechanic recommended that the engine be replaced. There were loose wires from the ECM, and the failure halted after the mechanic secured the wires. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The approximate failure mileage was 150,000.

Filed Nov 20, 2025 · Engine · NV

The injector failure in my 2018 GMC Sierra 1500 resulted in repeated misfire conditions (P0300 and P0307), causing the vehicle to lose power unexpectedly while driving. The engine would hesitate, shake, and struggle to accelerate, especially during merging or highway speeds. These symptoms created a significant safety hazard because the vehicle could not reliably maintain speed or respond to throttle input. Sudden power loss in traffic exposes the driver and surrounding motorists to an increased risk of collision, particularly during lane changes, freeway merging, intersection crossings, and passing maneuvers. The dealership confirmed internal injector failure, and the vehicle has been out of service for three months without resolution. This is a safety-critical defect that compromises vehicle controllability, stability, and safe operation on public roads.”

Filed Aug 19, 2025 · Engine · 110,000 miles · PA

The contact owns a 2018 GMC Sierra 1500. The contact stated that while driving on a neighborhood road at 40 MPH, the check engine warning light was flashing with an abnormal knocking sound coming from the engine, and the vehicle was vibrating abnormally. The contact pulled over and used a diagnostic scanner to perform a diagnostic test on the vehicle. The scanner retrieved DTC: P0301 (Cylinder #1 Misfire). The vehicle was towed to a local dealer to be diagnosed, and the contact was informed that the lifters, pushrods, camshaft, sparkplugs, and oil pump were faulty and needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 111,000.

Filed Apr 29, 2025 · Engine, Transmission · CA

I have taken it in due to engine mounts 4 different times, transmission replaced and in October 2024 I took it in for issues I was experiencing like I had before my transmission went out. I did not get my truck back until almost Dec 2024 and that was due to there employee backing into the front end of my truck. So after all that my warranty was up Dec 24 2024 and then on April 16th 2025 I was driving my 2018 GMC Sierra 6.2l 1500 Denali 129,600 miles at approx 30 mph it was late so the streets were empty and we started to hear a knocking or what I thought at the time was a very bad exhaust leak. We parked and then we started to try to make it home very slowly which we did and it was not making to much noise. The next day I called GMC and explained they said bring it in. I towed it there to be safe but it did start and still ran at very slow speed. They called me and said that the lift side rockers/ lifters 1 failed and it was stuck due to a misfire and that the engine would need to be rebuilt and sent me over some very vague break down which looked like a lump sum price. I requested and better break down and got a screen shoot and that when he said that’s the best they can do. There were no engine lights on or warnings nothing at all. It also just got serviced at GMC for an oil change on February 27th 2025 along with some air filters. Today is April 29th and still waiting for the service manage to call and see if they can do anything to help out instead of charging full price. I will Attach pictures of the cost break down if possible. Thank you

Filed Jan 31, 2025 · Engine · NC

My 2018 Silverado 1500 has had 3 cylinder 4 misfires over a 9 month period that had to be repaired after warranty. This caused the repair/replacement of the lifters. I have had this happen for a forth time this year January 7 2025 with the same code of "cylinder 4 misfire". That means four of the same issues in one year. I can be driving along smoothly, then suddenly from one light to the next, the check engine light comes on with the misfire to cylinder 4 coming on. It was shared with me the AFM can cause this to happen. On the third time of misfire, I saw a little smoke, then once it was repaired with lifters replaced, no smoke and back to running smoothly. This time the intake cam lobe was scored which voided the warranty. I am now at a crossroad as to what to do now, and have parked the truck for now. It is my understanding the 5.3L engine was considered a solid engine until the AFM was installed. Did I mention this is the first "truck" I have ever owned? I have had a Chevrolet vehicle since I was able to drive, and have never had engine problems of this magnitude. My concern now is that this could cause my engine to lock up while I'm driving around and cause a possible accident. I depend on this truck as my mode of transportation, but now I have to make a decision that impacts me greatly as a senior citizen on a fixed income.