Ever since I bought this truck new, I noticed a lot of metal shavings and debris in the oil filter every single time I changed the oil. I took it to the dealership multiple times to have this looked into before the engine recall came out. The dealership took pictures of the metal and sent them to a General Motors engineer, but the engineer just told them it was "normal." Later on, the truck went in for the official recall inspection, passed the PICO test, and nothing was fixed. Then on August 4, 2026, I was driving on a crowded expressway right through a construction zone with absolutely no shoulder to pull over on. Out of nowhere, the truck started hesitating badly, lost power, and the engine started making a really loud knocking noise. It was barely running, and it was incredibly dangerous because there was nowhere to go and traffic was heavy. Luckily, I was able to limp the truck along just far enough to clear the construction zone and pull over safely.
2024 GMC Sierra 1500: hesitation when accelerating
5 of the 384 complaints about the 2024 GMC Sierra 1500 describe hesitation when accelerating.
- owner complaints
- 5
- of this car's complaints
- 1%
- recalls
- 0
Hesitation when accelerating by model year
What owners say
Ever since I bought this truck new, I noticed a lot of metal shavings and debris in the oil filter every single time I changed the oil. I took it to the dealership multiple times to have this looked into before the engine recall came out. The dealership took pictures of the metal and sent them to a General Motors engineer, but the engineer just told them it was "normal." Later on, the truck went in for the official recall inspection, passed the PICO test, and nothing was fixed. Then on August 4, 2026, I was driving on a crowded expressway right through a construction zone with absolutely no shoulder to pull over on. Out of nowhere, the truck started hesitating badly, lost power, and the engine started making a really loud knocking noise. It barely ran, and it was incredibly dangerous because there was nowhere to go and traffic was heavy. Luckily, I was able to limp the truck along just far enough to clear the construction zone and pull over safely. the truck was towed to the dealer were they confirmed the engine was blown, and needs replaced.
I was driving down the highway when all of a sudden felt a hesitation and then seen message low oil pressure turn off vehicle and was just able to pull of the exit ramp of the highway when the truck had complete loss of power and then Died..called dealer right away and was flat bedded to the dealer..This just happened yesterday (06/08/26)
Engine seized at 23,291 miles, approximately 3,661 miles after GM's authorized dealer performed a PicoScope inspection under Recall N252494000 and certified the engine as passing. July 2025 recall attempt was documented as incomplete with no remedy available. November 2025 inspection passed the engine. Engine seized March 2026. New engine installed under Special Coverage N252494003. New drivability concern — hesitation and lurch at low speeds — appeared immediately after the repair.
The contact owns a 2024 GMC Sierra 1500. The contact stated that while driving at an undisclosed speed, the vehicle shuddered and hesitated, and the transmission was slipping. No warning lights were illuminated. The vehicle was taken to the dealer, where it was diagnosed, and DTC: P2818 “Pressure Control Solenoid H was stuck and the Transmission Control Module (TCM) valve body”. The contact was informed that the part needed to be replaced. The dealer informed the contact to stop driving the vehicle. The vehicle was repaired. The contact stated that months later, the failure reoccurred while driving at an undisclosed speed, and the vehicle shuddered and hesitated, and the transmission started slipping. The vehicle was taken back to the dealer, where it was diagnosed and determined that the torque converter needed to be replaced. The vehicle was repaired, but three months later, the failure reoccurred, and the RPM started fluctuating. The contact called the dealer; however, the vehicle was not inspected or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 3,000.
Service bulletins that may apply
- Condition where the connecting rod and/or crankshaft engine components in these vehicles may have...
- Condition in which the transmission may not shift properly
- This service bulletin advises the technician to check if the transmission cooler lines are twisted to...
- This bulletin provides a procedure to overhaul the control valve to replace a plate and worn down check...
- This service bulletin helps diagnose/reduce possible CCND issues on Transfer Cases
- This bulletin helps aid the tech in possible noise that may be normal or abnormal depending on the concern...
- This service bulletin provides information on Transmission Adaptive Functions and Correcting Low Mileage...
- This service bulletin provides a procedure to repair wiring to correct customer concerns of Driveability,...
Related recalls
No recalls on record for this model year.
Questions about the 2024 GMC Sierra 1500 hesitation
Is hesitation when accelerating a common problem on the 2024 GMC Sierra 1500?
5 of 384 owner complaints about the 2024 GMC Sierra 1500 (1%) mention hesitation when accelerating. The model year with the most reports is 2019.
Is there a recall or service bulletin for this on the 2024 GMC Sierra 1500?
There are 0 recalls and 50 service bulletins for the same area of the car. Check them below with your VIN.
Other symptoms on the 2024 GMC Sierra 1500
Engine failure 111Loss of power 56Check engine light 28Knocking 24Stalling 22Backup camera 15Won't shift 14Won't start 10Adaptive cruise 9Screen failure 7Shudder 7Warning lights 7Jerking 6Slipping 6Transmission failure 6Grinding brakes 5Oil consumption 5
VIN decoder
See the problems and recalls for an exact car
Buying a used 2024 GMC Sierra 1500?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history