The contact owns a 2007 GMC Yukon XL. The contact stated that the tailgate failed to open as needed. The contact researched and became aware that the issue was a known failure. The contact was informed that an undisclosed repair needed to be performed to release the tailgate. The contact stated that the area was extremely difficult to access to release the tailgate. The contact had scheduled an appointment with a certified mechanic to diagnose and repair the vehicle. The manufacturer was not made aware of the issue. The failure mileage was approximately 182,000.
The worst 2007 GMC Yukon XL problems
Ranked by number of owner complaints. Mileage and cost come from what owners wrote.
Problems by type
Tap a problem to see which part fails, at what mileage and in which other years.
- Airbags58
- Engine11
- Body9
- Acceleration6
- Driver assistance6
- Transmission5
- Electrical4
- Locks4
- Brakes2
- Lights2
- Seats2
- Fuel system1
- Seat belts1
- Steering1
- Suspension1
- Visibility1
Specific symptoms reported on the 2007 GMC Yukon XL
Recalls 4
Air bags: frontal: passenger side: inflator module
- What is wrong
- General Motors, LLC (GM) is recalling certain 2007-2011 Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Silverado 1500, Suburban, Tahoe, GMC Sierra 1500, Yukon, Yukon XL, and 2009-2011 Chevrolet Silverado 2500, Silverado 3500, GMC Sierra 2500 and Sierra 3500 vehicles originally sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, GM is recalling certain 2007-2008 Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Silverado 1500, Suburban, Tahoe, GMC Sierra 1500, Yukon, Yukon XL vehicles originally sold, or ever registered, in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." These vehicles are equipped with non-desiccated passenger frontal inflators containing phase-stabilized ammonium nitrate (PSAN) propellant. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
- Risk
- An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.
- Remedy
- GM will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. Interim letters notifying owners of the safety risk were mailed on February 22, 2021. Second notification letters will be mailed once the remedy is available. Owner notification letters were mailed on March 1, 2021. Owners may contact Chevrolet customer service at 1‑800‑222‑1020; Cadillac customer service at 1‑800‑458‑8006; and GMC customer service at 1‑800‑462‑8782. GM's number for this recall is N212328760.
Recall number 21V050000 · Recall details
Air bags: frontal: passenger side: inflator module
- What is wrong
- General Motors, LLC (GM) is recalling certain 2009 Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Silverado 1500, Silverado 2500, Silverado 3500, Suburban, Tahoe, GMC Sierra 1500, Sierra 2500, Sierra 3500, Yukon, and Yukon XL vehicles originally sold, or ever registered, in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." Additionally, GM is recalling certain 2007-2008 Cadillac Escalade, Escalade ESV, and Escalade EXT, Chevrolet Avalanche, Silverado 1500, Suburban, Tahoe, GMC Sierra 1500, Yukon, and Yukon XL vehicles originally sold, or ever registered, in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C." These vehicles are equipped with non-desiccated passenger frontal inflators containing phase-stabilized ammonium nitrate (PSAN) propellant. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
- Risk
- An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.
- Remedy
- GM will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. Interim letters notifying owners of the safety risk were mailed on February 23, 2021. Second notification letters will be mailed once the remedy is available. Owner notification letters were mailed on September 20, 2021. Owners may contact Chevrolet customer service at 1‑800‑222‑1020, Cadillac customer service at 1‑800‑458‑8006, and GMC customer service at 1‑800‑462‑8782. GM's number for this recall is N212328780.
Recall number 21V052000 · Recall details
Electrical system
- What is wrong
- Gm is recalling certain model year 2006-2009 buick, lucerne; cadillac dts; hummer h2; model year 2008-2009 buick enclave; cadillac cts; model year 2007-2009 cadillac escalade, escalade esv, escalade ext; chevrolet avalanche, silverado, suburban, tahoe; gmc acadia, sierra, yukon, yukon xl; saturn outlook; and model year 2009 chevrolet traverse vehicles equipped with a heated washer fluid system (hwfs). A recall was implemented in 2008 to add a fuse to the control circuit harness to address the potential consequences of a printed circuit board (pcb) electrical short. However, there have been new reports of thermal incidents on hwfs modules after this improvement was installed. These incidents resulted from a new failure mode attributed to the device's thermal protection feature. The significance varies from minor distortion to considerable melting of the plastic around the hwfs fluid chamber.
- Risk
- It is possible for the heated washer module to ignite and a fire may occur.
- Remedy
- Dealers will permanently disable and remove the heated washer fluid module. An updated page for the owner manual will be provided and inserted in the owner manual to document that the feature has been permanently disabled and removed from the vehicle. The safety recall began on june 11, 2010. Owners may contact buick at 1‑866‑608‑8080, cadillac at 1‑866‑982‑2339, chevrolet at 1‑800‑630‑2438, saturn at 1‑800‑972‑8876, gmc at 1‑866‑996‑9463 and hummer at 1‑800‑732‑5493 or at the owner center at www.gmownercenter.com.
Recall number 10V240000 · Recall details
Electrical system
- What is wrong
- Gm is recalling 857,735 my 2006-2008 buick lucerne; cadillac dts; hummer h2; my 2007-2008 cadillac escalade, escalade esv, escalade ext; chevrolet avalanche, silverado, suburban, tahoe; gmc acadia, sierra, yukon, yukon xl, saturn outlook; and my 2008 buick enclave vehicles equipped with a heated wiper washer fluid system. A short circuit on the printed circuit board for the washer fluid heater may overheat the control-circuit ground wire.
- Risk
- This may cause other electrical features to malfunction, create an odor, or cause smoke increasing the risk of a fire.
- Remedy
- Dealers will install a wire harness with an in-line fuse free of charge. The recall began on september 12, 2008. Owners may contact buick at 1‑866‑608‑8080; cadillac at 1‑800‑982‑2339 or http://www.cadillac.com; chevrolet at 1‑800‑630‑2438; saturn at 1‑800‑972‑8876 or http://www.saturn.com, gmc at 1‑866‑996‑9436; or hummer at 1‑800‑732‑5493; or through their website at http://www.gmownercenter.com .
Recall number 08V441000 · Recall details
See all 4 recalls for the 2007 GMC Yukon XL
Defect investigations
Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
EA21002
Interior Door Handle Laceration Risk
The investigated concern involved chrome plating on interior door handles that could peel or separate from the plastic base material.This de-lamination could result in a sharp edge and pose a risk of laceration.In some cases, consumers reported minor hand/skin lacerations.Of these reported injuries, the vast majority of injuries were to adults.Ninety percent of claims associated with interior door handle de-lamination were related to the front doors.In addition to the above Tahoe/Yukon vehicles, other GMT 900 series C/K vehicles (Avalanche, Escalade, Sierra, Silverado, and Suburban) have a trim level that utilizes the chrome plated interior door handles and were included in the analysis.The resultant population group had a total of 746 complaint reports with 309 injury incidents and 43,619 unique VIN regular warranty claims over a combined 451,745 vehicle population.The door handle supplier was changed in September 2006 with new tooling and process in place by October 2006.The base population prior to the September 2006 vendor change accounted for the bulk (or 89%) of all complaints and comparable injury reports and warranty claims.Due to the nature of the failure (thin chrome plating peeling off the door handle), only minor hand/skin laceration injuries similar to a paper cut were recorded.All but a few did not require professional medical treatment such as surgical or liquid sutures (i.e. stitches).Less than 10% of injury reports had specifically involved a 3-10 year old child.This was due to the fact that 90% of the claims were associated with door handles located in the front seating area (where the window glass panels usually have less solar tinting than rear window glass panels) where children are not normally seated. In July 2010, GM issued a Special Coverage Policy (SCP 09239) on the base vehicles to extend the warranty coverage to 10 years/100k miles.Recent data indicate that the base population complaint and injury reporting have subsided since the implementation of the SCP campaign.In June 2011, GM added the remaining interim population (Sep-Oct 2006) to the SCP.A safety-related defect has not been identified at this time and further use of agency resources does not appear to be warranted.Accordingly, this investigation is closed.The closing of this investigation does not constitute a finding by the federal safety agency that a safety-related defect does not exist.The agency will monitor this issue and reserves the right to take further action if warranted by the circumstances.
EA10004
Technical service bulletins for the 2007 GMC Yukon XL 1,033
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- Unknown or other
- Unknown or other
- This PI communicates the requirement to provide a pico file to receive diagnostic assistance from TAC.
- Unknown or other
- This service bulletin provides a procedure to flush and bleed power steering system to correct a power...
- This service bulletin provides information for dealers/technicians on OnStar Module 2G Sunset Information.
- This service bulletin explains how to measure for oil consumption and possible reasons for loss of oil.
- Unknown or other
- This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline...
- This service bulletin provides information on some vehicles that may rock or move slightly forward or...
What 2007 GMC Yukon XL owners say
Most recent owner complaints, unedited.
The contact owns a 2007 GMC Yukon XL. The contact state that when the vehicle was started, the air bag warning light illuminated with an audible chime, and the message "Service Air Bag" was displayed. The contact was taken to a dealer where it was diagnosed and determined that the driver’s side front impact sensor needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The manufacturer was not notified of the failure. The failure mileage was 171,264.
In these vehicles between two thousand and five and two thousand and seven are constantly, such as my vehicle, low oil pressure and lower rod bearing failure constant is which what I have and due to wiring cruise control becomes no good because of computer failure. I cannot afford to fix the lower rod bearings and notice that you have already a recall for trucks, twenty twenty one and up.But this problem has been ongoing from gm since twenty twenty five or more. I also took my vehicle in for an airbag recall.And after that, I still have an airbag light on after they fix the airbag recall.0
Part number 15816854 and says replaced by 15756444 cab pressure releaf vent rubber degrades and is open allowing exhaust fumes to go into cab of vehicle they are located above taillights of vehicle while driving sucks exhaust fumes into vehicle no parts available to fix vehicle and not normal serviceable part
The contact owns a 2007 GMC Yukon XL. The contact stated while driving at approximately 35 MPH, all the air bags were independently deployed, except the driver's steering wheel air bag. The contact pulled over and had to cut all the side curtain air bags and the passenger’s side front air bag which were blocking the view of the road. The contact stated no warning light was illuminated. The contact had not taken the vehicle to a local dealer or independent mechanic. The vehicle was not diagnosed or repaired. The manufacturer was not informed of the failure. The failure mileage was approximately 178,000.
I have a 2007 GMC Yukon. This car has been converted from the inside into a small limousine. Bench to bench with drinks bar in the middle. I would like to ask you, if I give you the chassis number, can you check if this car was converted at your factory? Can I receive a letter from you documenting this change? Attached are pictures of the car
In June 2021 at approximately 168,000 miles the engine suffered catastrophic engine failure while driving. I was forced to replace the engine at my cost as it was out of the original warranty. I was told the cause of the engine failure was due to low oil pressure over an extended prior of time from worn engine bearings which resulted in a dropped value in cylinder #7 and #8.
Backup camera inop. I took it to dealer for repair and they said they could not repair due to age and parts availability.
The contact owns a 2007 GMC Yukon XL. The contact stated while driving 35 MPH over a small pothole, the driver's side and the passenger's side side-curtain air bags deployed inadvertently. The vehicle was taken to the dealer, where the contact was referred to the dealer's auto body repair shop. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The contact was awaiting a call back from the manufacturer. The failure mileage was approximately 176,300.
The contact owned a 2007 GMC Yukon XL. The contact received notification of the federal safety agency Campaign Number: 21V050000 (Air Bags) and would like to be removed from the recall distribution list. The local dealer and manufacturer were not contacted.
Compare the 2007 GMC Yukon XL
Other model years
1999200020012002200320042005200620072008200920102011201220132014201520162017201820192020202120222023202420252026
Questions about the 2007 GMC Yukon XL
Is the 2007 GMC Yukon XL reliable?
Owners have filed 97 complaints about the 2007 GMC Yukon XL, 1.4 times a typical Yukon XL model year.
What is the 2007 GMC Yukon XL year score?
The 2007 GMC Yukon XL scores 54 out of 100 (below average). The score compares it with the other model years of the GMC Yukon XL: 75 is a typical year, 50 means twice the usual complaints, and serious complaints and recalls lower it.
What is the most common problem with the 2007 GMC Yukon XL?
Airbags, with 58 complaints, typically around 100,000 miles. Next is engine (11).
How many recalls does the 2007 GMC Yukon XL have?
4 recalls, covering air bags and electrical system.
Was there a recall on the 2007 GMC Yukon XL airbags?
Yes, 2 recalls: 21V050000, 21V052000. Check your VIN to see if your car still needs the free repair.
What year does the GMC Yukon XL have bad airbags?
The GMC Yukon XL model years with the most airbags complaints are 2007 (58 complaints), 2008 (42 complaints) and 2011 (21 complaints).
VIN decoder
See the problems and recalls for an exact car
Buying a used 2007 GMC Yukon XL?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history