No crash, injury, warning lamp, message, or loss-of-braking event occurred. The issue involves the brake hydraulic system and the fluid specified for my 2023 Hyundai Santa Fe Calligraphy. Hyundai’s owner specification requires SAE J1704 DOT-4 LV / ISO 4925 Class 6 brake fluid. During a brake-fluid exchange, an authorized Hyundai dealer installed BG 84032, which BG identifies as conventional DOT 4. BG sells a separate product, BG 84132, identified as Low Viscosity DOT 4 meeting ISO 4925 Class 6. The original BG 84032 has since been correctly replaced by an independent repair facility and is not available for inspection. I have attached all materials I believe are relevant. Both BG product specifications are available from the BG website. My safety concern is that conventional DOT 4 does not meet the Class 6 low-temperature viscosity requirement specified for this model and other high-volume Hyundai models, which could affect ABS/ESC hydraulic response under low-temperature, icy, or snowy conditions. The Hyundai dealer’s repair order documents installation of BG 84032, consistent with the MOBIS part listing for the vehicle. An email exchange between the dealer and a Hyundai Motor Americas (HMA) parts advisor suggests a lack of understanding of the required fluid specification. HMA customer service twice confirmed to me the vehicle requires a 'DOT 4 LV' fluid. There appears to be conflicting Hyundai information: the owner specification requires DOT-4 LV/Class 6; the reservoir cap states only 'DOT 4' and Hyundai/MOBIS service information simply lists conventional DOT 4. In addition, a call to the Lithia Hyundai (Reno) parts department also resulted in a recommendation for conventional DOT 4, suggesting this may be systemic rather than an isolated dealer error. No police or insurance inspection occurred. I am asking the federal safety agency to determine the extent to which this represents a broader safety-related service-information issue.
2023 Hyundai Santa Fe: ABS light or ABS activating
8 of the 216 complaints about the 2023 Hyundai Santa Fe describe ABS light or ABS activating.
- owner complaints
- 8
- of this car's complaints
- 4%
- recalls
- 0
ABS light or ABS activating by model year
What owners say
I was travelling at 50mph a car pulled in front of me and stopped unexpetedly. I braked hard. My car began to slow, but the brake pedal went to the floor and did not slow, AFter a few seconds, the brake pedal came up from the floor and braking was resumed. I held the pedal to the floor the whole time trying to stop. It was as though the braking system failed and recovered. There was no pulsing felt on the brake pedal typical of ABS working. After my car resumed braking thte collision avoidance system took over and the car stopped just inches from the stopped car in front of me. I had just taken the car in for dealer service at 24,200 and everything was supposedly checked out as required by maintenance. I have contacted Hyundai but have not gotten a response yet.
On [XXX], a 2023 Hyundai Santa Fe SEL (VIN: [XXX] ) spontaneously caught fire ~8 hours after parking, per fire report (Walla Walla Fire Dept.). The fire destroyed the hyundai santa fe sel engine compartment and totaled 5 vehicles with a total value of over $400,000 not including personal property to the parties involved. I was not the Hyundai’s renter/operator; the vehicle was rented by a third party from Enterprise. Despite no active recall for this VIN, the vehicle contained: Mando ABS module, Mando EPS module similar to known defective parts of the same year, and Hyundai Mobis tow hitch harness, all of which have known defect/recall history in similar make/Model equivalent vehicles. This case may involve VIN exclusion errors or latent product defects similar to recent defects INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Whilst driving the vehicle a number of warning lights appeared on the dashboard. This occurred after the vehicle was brought to a stop at a stop sign. There were no outside influences before or after the warnings began. The vehicle remained operable and was driving back to our residence approximately 1 mile away. I made an appointment with the local dealership to investigate the issue. The appointment was made for the following day. Whilst driving the vehicle to vehicle to the dealership on the following day the brakes became temporarily inoperable forcing me to leave the road and hit the right hand kerb. After pumping the brake pedal several times the brakes re-engaged and I was able to stop the vehicle. The dealership have explained that a rear wheel speed sensor (ABS) had failed and was sending messages to the the braking system which made the braking system inoperable. The dealership replaced the sensor and at this time the vehicle is operating as expected.
Upon braking hard and suddenly due to being cutoff on the interstate, it felt as if the antilock brakes did not properly engage but rather grabbed/grinded/scraped. Only when I let off the brake did they disengage. This happened the first time within 2 months of owning the car and with less than 2k miles on it, at highway speeds (65-70 MPH) and this sensation has happened probably 4 times in the 7 months I have owned the car under various scenarios of stopping quickly. In addition, it recently happened when driving 25-30 MPH and coming to a normal stop approaching a stop sign - where it felt as if the brake on the front passenger tire grabbed/grinded/scraped (but not on the 3 other tires). I have taken the car back for inspection at the dealer twice, neither time have they found any issues. In addition, one evening the stability control light flickered, sounded as if the dash was frying/sizzling with no reason - roads were not wet, no leaves, grass or other debris, etc. and speed was 25-30 - this happened twice within 3 miles. Dealer found no issue with car after performing visual inspection of wiring, check of system for code errors, nor driving test to reproduce issue. Had the brakes failed, I could have been in an accident causing serious harm to me/my passengers or whomever I could have hit. I believe the ABS system needs to be replaced or reprogrammed but the dealer refuses to acknowledge a problem exists. Online forums indicate similar (and worse) issues, also with people stating they cannot get a dealer to resolve their problems. This is a serious malfunction of either the electric or braking system in some capacity and should be fixed before people are severely injured or killed.
The contact owns a 2023 Hyundai Santa Fe. The contact stated that while driving approximately 35 MPH, the downhill assist, traction control, auto stop, blind spot, and ABS warning lights illuminated. The contact was able to pull over and called the local dealer and was informed that the vehicle was safe to drive. While driving at an undisclosed speed, the brakes independently activated. The vehicle was taken to the local dealer, where it was diagnosed that the wheel speed sensor needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 2,000.
Over the last Tom th, I have encountered some pretty scary issues with my brand new Santa Fe purchased in April. Last week, while driving, after I turned on adaptive cruise control, the system alerted me that “smart crusade control conditions weren’t met” and kept trying to engage the front left brake — this occurred three days in a row. After turning off the smart cruise control and entering residential roads, the front left brake tried to engage in a manner that seemed consistent with ABS issue. I brought car in two days later to Dublin Hyundai and they said they couldn’t find anything wrong with it. I picked the car up yesterday morning and then last night while driving on the highway, it alerted me that I need to “check highway drive assist system” and a warning light came up. After about 5 minutes, the car jerked me incredibly hard to the left on the freeway and then athe light turned off. Then two days ago, I was driving my car on the highway the car randomly said “emergency braking system activated” twice, while going 70 on the freeway in the middle of nowhere. This was while driving safely and no cars nearby either time. I looked online and it appears this is a problem that’s occurred in many Santa Fe’s, so there is clearly an issue with manufacturing (which I’m assuming is the same case as the previous issues I’ve run into).
All lights that come on when you first start the vehicle stay on. ABS, forward collision, rear collision, side mirror check, down hill brake, etc. The brakes and brake pedal would lock up when attempting to brake. Pedal stays locked but the wheels didn’t seem too. Brake system wouldn’t respond to pumping the brakes the pedal stayed frozen. It could have caused me a serious accident.
Service bulletins that may apply
Related recalls
No recalls on record for this model year.
Questions about the 2023 Hyundai Santa Fe abs
Is ABS light or ABS activating a common problem on the 2023 Hyundai Santa Fe?
8 of 216 owner complaints about the 2023 Hyundai Santa Fe (4%) mention ABS light or ABS activating. The model year with the most reports is 2014.
Is there a recall or service bulletin for this on the 2023 Hyundai Santa Fe?
There are 0 recalls and 1 service bulletin for the same area of the car. Check them below with your VIN.
Other symptoms on the 2023 Hyundai Santa Fe
Sunroof shattered 20Check engine light 15Adaptive cruise 12Loss of power 11Stalling 11Collision warning 9Engine failure 9Won't shift 9Transmission failure 7Jerking 6Shudder 6Brake failure 5Fire or smoke 5Hesitation 5Slipping 5
VIN decoder
See the problems and recalls for an exact car
Buying a used 2023 Hyundai Santa Fe?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history