The contact owns a 2022 Ram 2500. The contact stated that while driving approximately 70 MPH, the steering wheel jerked to the right and the traction control warning light illuminated. The contact stated that while the vehicle was parked, the electronic stability control, Forward Collision Avoidance, check engine, and power steering warning lights were illuminated. The vehicle was taken to a dealer, where it was diagnosed and determined that there was water intrusion in the rack and pinion, causing corrosion of the electronic power steering system and several other unknown components that needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 31,000.
Ram 2500 collision warning problems
10 of the 5,171 owner complaints about the Ram 2500 describe false forward collision warnings, most of them for the 2019 model year.
- owner complaints
- 10
- worst model year
- 2019
- typical mileage
- 31,000
Is there a fix? There are 11 recalls for this area of the car. See below
By model year
- 20242
- 20222
- 20202
- 20192
- 20181
- 20171
Often reported together
Adaptive cruise 2ABS 2Jerking 1Check engine light 1No deployment 1
What owners say
Airbags did not deploy during a significant accident where (self) Dodge Ram 2500 Laramie 2024 truck was involved in 2 front on collisions hitting 2 different vehicles at approx 65 mph (about 5 mins apart) including a 3rd part to the accident with a rear collision by a full speed tractor trailer moving the (dodge) truck about 200 ft. into the 2nd parked vehicle (blue sedan). Dodge truck (self) was not drivable after the initial accident into the chevy truck. No auto breaking and no frontal collision warning (uncertain if they are standard for the trucks or an option) occurred. The vehicle was towed and in a tow lot (is available for inspection). There is a police report and followed up with an ER visit same day. At least 3 vehicles were totaled due to this accident. The initially hit vehicle (white chevy truck) was the cause of the accident.
The contact owns a 2024 Ram Promaster 2500. The contact stated that on several occasions, while parked or while driving at various speeds, the air bag and Forward Collision Avoidance warning lights intermittently illuminated. The contact stated that the message "SOS -Unavailable - Please Contact Dealer for Service" was displayed. The vehicle was taken to a dealer on several occasions for approximately a year, where it was diagnosed that the power steering gearbox and the radio needed to be repaired. Additionally, the wiring was taken apart and cleaned, and reattached after finding a wiring issue. The vehicle was repaired each time, but the failure reoccurred after each repair. The manufacturer was notified of the failure, and a complaint was filed. The failure mileage was approximately 45.
This vehicle is 3 years old and has 29k miles driven. The forward collision avoidance system stopped working and can no longer be turned on. This installed safety feature is no longer usable and is a risk to passengers in the event of a road Hazzard situation presents itself. The system failed without warning. The vehicle was taken into the dealer for inspection and the dealer confirmed that the Drivers Assistance System Module (DASM) has failed and requires replacement.
The contact owns a 2019 Ram 2500. The contact stated that while driving 5 MPH, the brake pedal was inadvertently applied with the Forward Collision Avoidance message displayed. The contact depressed the brake pedal, and then the accelerator to start the vehicle. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 130,000.
The contact owns a 2017 Ram 2500. The contact stated that on several occasions while driving at various speeds, the ABS, traction control, TPMS, and Forward Collision Avoidance warning lights illuminated. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was approximately 117,000. The contact stated Fiat/Chrysler/Ram Trucks is going to replace the hydraulic ABS module free of charge.
The contact owns a 2018 Ram 2500. The contact stated while driving approximately 35 MPH, the "Service Electronic Brake" and "ABS Module Failure" messages were displayed. Additionally, the Forward Collision Avoidance Adaptive Cruise Control (ACC) mode disengaged was displayed. The vehicle was taken to an unknown dealer, where it was diagnosed that the ABS pump control module had failed, and the ABS module part number: 68143491AB and an unknown module part number: 68347098AB needed to be replaced; however, the parts were not available. The dealer cleared the diagnostic codes; however, the failure recurred. The vehicle was taken to another dealer, who cleared the codes; however, the failure persisted. The contact stated that he had contacted several unknown dealers, who advised that the parts were not available. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was approximately 80,000.
The service anti-lock brake message comes on followed by the service electronic stability control. Sometimes the forward collision warning also flashes unavailable. When this happens, if I try to use the cruise control I get another message that says cruise control unavailable. This began happening the week I picked up the truck in march and was intermittent, happening every 2nd or 3rd day. Now it happens almost every time I start the truck. I did not take the truck back to the dealer until 3 june 2020 because of the coronavirus.
Vehicle engages the forward collision warning and active braking at reduced speeds when turning inside of a parking garage. Numerous complaints online confirm similar instances. I had to manually turn off the forward collision active breaking just because it was so sensitive I was not able to move at any speed inside of a parking garage (particularly when approaching a corner to move up in levels) without the active braking occurring. Any vehicle following would be at increased risk of colliding with my vehicle.
My 2019 ram 2500 limited has the forward collision warning system, however, the system does not function as sold or intended. I have taken the vehicle to multiple dealerships in an attempt to resolved the issue, however neither the dealerships nor fca has any idea how to resolve. Fca customer service believes it may be software related, but currently has no idea when/if a solution will arise. Currently the vehicle sensors do not seem to function at all, and the vehicle absolutely could not prevent a forward collision if required. All advertising and owner's manual documentation state the vehicle can and should be able to prevent a forward collision, and I believe this misrepresentation could prove hazardous to both vehicle owners and other drivers on the road if the system does not function as advertised on both the internet website for ram trucks, or the owner's manual provided with these vehicles.
Related recalls
Electronic stability control (ESC): control module
- What is wrong
- Chrysler (FCA US, LLC) is recalling certain 2026 Ram 2500 Pickup trucks. The trucks may be equipped with steering column control modules that can cause a loss of electronic stability control. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 126, "Electronic Stability Control Systems."
- Risk
- A loss of electronic stability control increases the risk of a crash.
- Remedy
- Dealers will replace the steering column control module, free of charge. Owner notification letters are expected to be mailed November 24, 2026. Owners may contact FCA customer service at 1‑800‑853‑1403. FCA's number for this recall is 90D. Vehicle Identification Numbers (VINs) involved in this recall became searchable on on October 13, 2026. This recall expands previous the federal safety agency recall number 26V244.
Recall number 26V651000 · Recall details
Back over prevention: sensing system: camera
- What is wrong
- Chrysler (FCA US, LLC) is recalling certain 2026 Jeep Wrangler, Jeep Gladiator, Jeep Compass, Jeep Cherokee, Jeep Grand Cherokee, Jeep Grand Cherokee L, Jeep Grand Wagoneer, Jeep Grand Wagoneer L, Ram Promaster, Ram Promaster EV, Ram 1500, Ram 2500, Chrysler Pacifica Plug-In Hybrid, Chrysler Voyager, and 2026-2027 Chrysler Pacifica and Dodge Charger vehicles. The rearview camera image may fail to display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
- Risk
- A rearview camera image that fails to display reduces the driver's view behind the vehicle, increasing the risk of a crash.
- Remedy
- Radio software will be updated by a dealer or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed beginning September 2, 2026. Owners may contact Chrysler customer service at 800‑853‑1403. Chrysler's number for this recall is 78D. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on on August 20, 2026.
Recall number 26V531000 · Recall details
Back over prevention: sensing system: camera
- What is wrong
- Chrysler (FCA US, LLC) is recalling certain 2019 and 2023 Chrysler Pacifica, 2024 Ram 1500, Ram 2500, and 2024-2025 Jeep Wrangler vehicles. Contamination in the central vision processing module or improper programming may cause the rearview camera image not to display. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
- Risk
- A rearview image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.
- Remedy
- Dealers will update the central vision processing module software or replace the module, as necessary, free of charge. Owner notification letters are expected to be mailed beginning July 16, 2026. Owners may contact Chrysler customer service at 800‑853‑1403. Chrysler's number for this recall is 46D. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on on May 28, 2026.
Recall number 26V327000 · Recall details
Electronic stability control (ESC): control module
- What is wrong
- Chrysler (FCA US, LLC) is recalling certain 2026 Ram 2500 Pickup trucks. The trucks may be equipped with steering column control modules that can cause a loss of electronic stability control. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 126, "Electronic Stability Control Systems."
- Risk
- A loss of electronic stability control increases the risk of a crash.
- Remedy
- Dealers will replace the steering column control module, free of charge. Owner notification letters were mailed May 7, 2026. Owners may contact FCA customer service at 1‑800‑853‑1403. FCA's number for this recall is 36D. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on beginning April 23, 2026.
Recall number 26V244000 · Recall details
Back over prevention: sensing system: camera
- What is wrong
- Chrysler (FCA US, LLC) is recalling certain 2021-2022 Dodge Durango, 2021-2023 Chrysler Pacifica, Jeep Grand Cherokee L, 2022 Ram 1500, 2500, 3500, Chrysler Voyager, 2022-2023 Jeep Compass, Grand Cherokee, Wagoneer, Grand Wagoneer, and Ram Promaster vehicles. The radio software may prevent the rearview image from displaying. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
- Risk
- A rearview camera image that does not display decreases the driver's visibility, increasing the risk of a crash.
- Remedy
- Dealers will update the radio software or the software will be OTA, "Over-The-Air," free of charge. Owner notification letters were mailed beginning July 9, 2024. Owners may contact FCA US, LLC customer service at 1‑800‑853‑1403. FCA US, LLC's numbers for this recall are 66B and 79B.
Recall number 24V436000 · Recall details
Back over prevention: display function
- What is wrong
- Chrysler (FCA US, LLC) is recalling certain 2022-2023 Ram 1500, Ram 3500 Cab Chassis with GVWR less than 10,000 lbs., and 2022-2024 Ram 2500 vehicles. The radio software may prevent the rearview image from displaying. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
- Risk
- A rearview camera that does not display an image reduces the driver's rear view, increasing the risk of a crash.
- Remedy
- Dealers will update the radio software, free of charge. Owner notification letters were mailed October 24, 2023. Owners may contact FCA US, LLC customer service at 1‑800‑853‑1403. FCA US, LLC's number for this recall is 97A.
Recall number 23V654000 · Recall details
Back over prevention: display function
- What is wrong
- Chrysler (FCA US, LLC) is recalling certain 2021-2023 Ram 1500 and 2023 Ram 2500 vehicles. The trailer reverse steering control module (TRSCM) may prevent the rearview image from displaying when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
- Risk
- A rearview image that does not display while in reverse decreases the driver's visibility of the rear view, increasing the risk of injury or crash.
- Remedy
- Dealers will update the TRSCM software, free of charge. Owner notification letters were mailed March 1, 2023. Owners may contact FCA US, LLC customer service at 1‑800‑853‑1403. FCA US, LLC's number for this recall is 14A. This recall supersedes and expands previous recall numbers 21V‑438 and 21V‑918. FCA US Recall ID 63A is a vehicle population expansion of FCA US Recall ID 14A (the federal safety agency Recall ID 23V‑059).
Recall number 23V059000 · Recall details
Back over prevention: display function
- What is wrong
- Chrysler (FCA US, LLC) is recalling certain 2022 Ram 1500, 2500 pickup trucks, and 3500 Cab Chassis vehicles with GVWR less than 10,000 lbs. The radio software may prevent the rearview image from displaying. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
- Risk
- A rearview camera that does not display an image reduces the driver's rear view, increasing the risk of a crash.
- Remedy
- Dealers will reprogram the radio software, free of charge. Owner notification letters were mailed July 5, 2022. Owners may contact FCA US, LLC customer service at 1‑800‑853‑1403. FCA US, LLS's number for this recall is Z47.
Recall number 22V407000 · Recall details
Electronic stability control (ESC)
- What is wrong
- Chrysler (FCA US, LLC) is recalling certain 2019-2022 Ram 2500 and 2021-2022 Dodge Durango vehicles, and 2019-2022 3500 cab chassis with GVWR less than 10,000 lbs. The ABS control module software may prevent the electronic stability control (ESC) malfunction indicator light from illuminating during certain conditions. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 126, "Electronic Stability Control Systems."
- Risk
- An ESC malfunction indicator light that fails to illuminate during an electronic stability control problem can increase the risk of a crash.
- Remedy
- Dealers will update the ABS control module software, free of charge. Owner notification letters were mailed March 29, 2022. Owners may contact FCA US, LLC customer service at 1‑800‑853‑1403. FCA US, LLC's number for this recall is Z20.
Recall number 22V140000 · Recall details
Back over prevention: sensing system: camera
- What is wrong
- Chrysler (FCA US LLC) is recalling certain 2020 Jeep Gladiator and Jeep Cherokee, 2019-2020 Ram 1500 Pickup, Ram 2500 Pickup, Ram 3500 Pickup, Chrysler Pacifica, Dodge Durango, Jeep Grand Cherokee, Jeep Wrangler, and Jeep Renegade and 2019 Dodge Challenger vehicles equipped with 8.4" or 12" radio displays. A software error can cause the rearview camera image to remain displayed after the vehicle has been shifted out of reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."
- Risk
- The lingering rearview image can distract the driver, increasing the risk of a crash.
- Remedy
- Chrysler has notified owners, and dealers will update the radio display software, free of charge. Optionally, owners can choose to remotely update their software via an Over-The-Air (OTA) update available as of May 1, 2020. The recall began April 27, 2020. Owners may contact Chrysler customer service at 1‑800‑853‑1403. Chrysler's number for this recall is W30-W37.
Recall number 20V191000 · Recall details
Questions about the Ram 2500 collision warning
Which Ram 2500 years have false forward collision warnings problems?
The model years with the most reports are 2019 (2 complaints), 2020 (2 complaints) and 2022 (2 complaints).
VIN decoder
See the problems and recalls for an exact car
Buying a used Ram 2500?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history