When i first purchased the vehicle off the lot a few years back (its a 21, so probably in 22?) Brand new off the lot minimal miles. Within the first few months we started having issues with the power wanting to shift down. We took it in, the dealership found nothing wrong with it and cleared the codes. This happened a few more times. The last 2 times I took it in. They mentioned that there were recalls on it and could possibly be causing the issue. Took care of that (last august- have docs. to prove it as along with what they did and what we stated). Fast forward now 2 months ago (April of 25) and it starts acting up again and wants to downshift, shifting hard, stuttering and not wanting to drive, the same things we have been complaining about since beginning with lights on etc. However, this time we tried to shut it off and give some down time to get back home. After about 10 mins, we went to start the truck to get it home, and it would not start. We had it towed to the dealership. Once they got it, after 2 weeks of waiting we were finally presented with, the starter went out and the wiring box needed to be replaced (this has to be done before they can look into the original problem again) (because without those 2 things fixed, they wont be able to do) it is now June. I took the vehicle home, due to not having funds to fix right away. After doing some research and some digging, it would appear that the issues that we are having with the truck are issues that are already being recalled on this specific truck and model. However, for mine it is not, because I have the 2.7 l turbo and not the 6.8. THere have been numerous complaints about the known issue.(which i found out is the other wiring by the engine that is being chafed which is causing the wires to break and causing the other box and alternator to go and be replaced). If you replace it fries all again. Why is the 2.6 engine problem thats reported not recalled but rest is and it is known. I also see this online
2021 Chevrolet Silverado 1500: won't start
11 of the 859 complaints about the 2021 Chevrolet Silverado 1500 describe won't start.
- owner complaints
- 11
- of this car's complaints
- 1%
- recalls
- 1
Won't start by model year
What owners say
The contact owns a 2021 Chevrolet Silverado1500. The contact stated while driving the vehicle he felt shuttering and noticed his automatic start does not start. The contact also experienced engine reduced power issues, preceded by a warning sign on the dashboard stating "Engine Power is Reduced" while driving. Additionally, the contact noticed a significant loss of mileage per gallon and a loss of oil. The contact noticed a check engine light on, which had codes that had a crankshaft and cam shaft sensors that are not operating properly, which the vehicle cannot be inspected due to the failure. The vehicle was taken to a dealer where it was diagnosed to need a new timing chain to control on the cams and crankshaft. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 110,000.
While operating my vehicle under normal driving conditions, I experienced a sudden and complete loss of engine power without warning. The engine shut off abruptly in active traffic, creating an immediate safety hazard and increasing the risk of a collision for myself and surrounding motorists. Following the stall, the vehicle would not restart. The engine cranks but does not start (a “dry crank” condition). There were no prior warnings, indicators, or drivability issues suggesting an impending failure. This vehicle is equipped with the L87 6.2L V8 engine, which is subject to a known recall involving internal engine defects that may result in sudden failure. The symptoms and failure mode observed are consistent with reported cases of internal engine damage, including potential bearing or rotating assembly failure. At the direction of GM and the dealership, the vehicle was previously brought in for recall inspection. The recall was subsequently marked as completed. However, I am now being advised that the recall cannot be reopened and that I am responsible for the repair costs. A completed recall inspection does not eliminate manufacturer responsibility when the underlying defect later results in failure. I understand there is an ongoing and recently reopened the federal safety agency investigation into GM’s “Pico test” inspection process, as multiple engines have reportedly failed after passing this procedure. Given that this failure occurred after the recall inspection was completed, this incident raises concerns regarding the adequacy and effectiveness of the prescribed remedy. This event represents a serious safety issue due to the sudden loss of power in traffic without warning. I am submitting this complaint to document the failure and to request further review of the recall remedy and associated inspection process.
I am the owner of a January 2021 6.2 liter Chevy Silverado 1500. I have had multiple issues with this vehicle. Oil pressure control solenoid, many no starts, failure to starts, engine lights, oil lights. Truck started to use an excessive amount of oil before scheduled oil changes. The engine sometimes hesitate and fails to accelerate. The engine became noisy. My mechanic started that the engine is noisy and the oil pressure is at 15 lbs. They said it will need a replacement engine that is not covered under my expired power train warranty. The mechanic stated it's not a matter of if it will go, is a matter of when We are a family of 5 and this is our family vehicle. We feel very uncomfortable driving this vehicle with our family knowing the engine is going to fail at any time while driving. This is a heartbreaking expense that I don't believe that we should have to pay for. We have always maintained our vehicle and have never abused it.
Engine started making clicking noise when accelerating. Followed by a large screeching noise. Dash read "shift to neutral and start again" pulled to stop and tried to start. Does not crank at all.
At 38,000 miles: While driving, the engine began knocking, vibrating and shut off. The check engine light came on and the vehicle could not be restarted. It was towed to the dealer who diagnosed it with lifter failure. It was still under the powertrain warranty at this time. Several lifters were replaced as well as other engine parts and I was given the truck back after a few weeks. A week later, truck would not start. After looking under the hood I noticed most of the hoses and wires were not clipped off, causing them to just rattle and move around. Upon further investigation, I found that the wire to the starter was loose and had to be wiggled to get the truck to start. This wire should have been secured to the vehicle with the provided clips, but it was not and came loose because of it. I also found a random loose bolt lying in a void space under the hood near the windshield. I took the truck back to the dealership that replaced the lifters and explained my frustration with the condition my truck was put back together after tearing into the engine. I also showed them the random bolt I found. Their manager assured me that they would go through the engine compartment and make sure that the wires and cables were properly secured to the side like it should have been after the initial engine work. I never received an explanation of where the random bolt came from. After this engine work, my truck never seemed to drive the same. It began use more oil and the fuel MPG decreased. I reported to the dealer on the oil consumption and they had me start an oil consumption test. 600 miles after the oil change my engine light came on, truck began to run rough and make a loud engine rattle noise. I took it back to the dealer for a diagnosis. They called back and said that there was a lot of metal in my oil when they drained it. They contacted GM and are scheduled to open the engine up to find out if it can be fixed or needs a new engine. Currently at 52000 miles
I was driving down the road at no more the 15 mph up hill in 4x4 when the engine shut off. No warning lights or noise and would not turn over. Had it towed to the local dealership to find out the main thrust bearing seized. I have to wait two to three months for a new engine which is covered under warranty. No wheels in the meantime. Only has 25,640 miles on it.
Driving down the road and the vehicle shut off and said to restart. Wouldn't start back up. Check and found a 400 amp fuse was blown. Tested starter and was fine. Restarted the vehicle and it made a loud rattling noise and shut back off. Sent it to the dealer and they found that number 1 and 2 rods overheated and locked up the motor.
Push start button malfunctioned. The vehicle would not turn off last night and took about 30 minutes to get vehicle to turn off. Next day, had the same issue where vehicle would not start and left me stranded. After calling for a tow truck, I was able to start the vehicle. When researching the problem online, I saw several other complaints of the same issue where the buttons malfunctioned and could either not start their vehicle or turn the vehicle off.
Vehicle will not start and cranks until starter kicks out, about 30 seconds each time. I am afraid if this happens at a traffic signal or stop sign it could be bad. I took it to the dealer on July 30-2022. (2972 mileage) and they could not verify concern. I found a safety bulletin on a GM website for a extended crank/ no start. It is PIP5806D, The dealer says they know nothing about this. It lists a labor operation number 4088148, due to a corrupt signal from camshaft position sensor to the ECM. It has happened now 4 times, and current mileage is 6973. I have been dealing with Champion Chevrolet in Reno NV. It has started after 8 to 10 crank time outs and the battery starts slowing the crank speed down, but around 10 to 15 minutes have passed by then.
"no start" issue. Intermittent no start increased in it's frequency until it wouldn't back in July 2021, it had approx. 9600 miles on it. Had it towed to dealership. They could not recreate problem. I raised hell, and started reading that others had similar problem. A TSB came out that advised tech to install .5 shim. That seemed to have worked until recently late May 2022, have appt. with dealership again. They didn't do a scan the next day to pull a code since one might have shown up at that point. Most likely nothing there now. truck has been driven an additional 10K miles since initial problem and now shows 21400 miles. I can't have this problem every 10K, since soon this will be coming out of my pocket. and it needs a fix as others are having the same problem. GM has had well over a year to sort this out so I'm hoping if it isn't the cam sensor it's something else fairly straight forward. Heading in for service again on 6/15/2022 for same complaint.
Service bulletins that may apply
- Condition where the connecting rod and/or crankshaft engine components in these vehicles may have...
- Under Field Actions N252494000, N252494001, the service procedure includes performing a PICO test on...
- Condition that could
- This technical bulletin provides a procedure to replace the camshaft actuator magnet to correct customer...
- This informational bulletin advises the technician of a part number change for long block engines used in...
- This service bulletin provides information on replacing the intake manifold when the engine is replaced...
- This bulletin advises the tech to inspect deeper into what may be to main
- The service bulletin advises the tech of a normal transmission shift condition and the delay in throttle...
Related recalls
Engine and engine cooling: engine: hard parts internal/mechanical
- What is wrong
- General Motors LLC (GM) is recalling certain 2021-2024 Cadillac Escalade and Escalade ESV, Chevrolet Silverado 1500, Suburban, and Tahoe, GMC Sierra 1500, Yukon, and Yukon XL vehicles equipped with a 6.2L V8 gas engine. The connecting rod and/or crankshaft engine components may have manufacturing defects that can lead to engine damage and engine failure.
- Risk
- Engine failure increases the risk of a crash.
- Remedy
- Dealers will inspect the engine, and as necessary, repair or replace the engine. For vehicles that pass inspection, dealers will add higher viscosity oil, install 6 oil fill cap, replace the oil filter, and update the owner's manual. Repairs will be performed free of charge. Owner notification letters were mailed June 18, 2025. Owners may contact Cadillac customer service at 1‑800‑333‑4223, Chevrolet customer service at 1‑800‑222‑1020, or GMC customer service at 1‑800‑462‑8782. GM's number for this recall is N252494000.
Recall number 25V274000 · Recall details
Questions about the 2021 Chevrolet Silverado 1500 won't start
Is won't start a common problem on the 2021 Chevrolet Silverado 1500?
11 of 859 owner complaints about the 2021 Chevrolet Silverado 1500 (1%) mention won't start. The model year with the most reports is 2022.
Is there a recall or service bulletin for this on the 2021 Chevrolet Silverado 1500?
There is 1 recall and 321 service bulletins for the same area of the car. Check them below with your VIN.
Other symptoms on the 2021 Chevrolet Silverado 1500
Check engine light 192Engine failure 149Loss of power 86Knocking 63Misfire 53Stalling 51Jerking 43Harsh shifting 33Hesitation 33Shudder 32Transmission failure 31Won't shift 25Slipping 17Oil consumption 15Overheating 15Power steering loss 15Warning lights 14Ball joint 13Fire or smoke 13Fuel pump 11Grinding brakes 10No deployment 9Brake failure 9ABS 8Airbag light 7Backup camera 5Seat belt 5Water leak 5
VIN decoder
See the problems and recalls for an exact car
Buying a used 2021 Chevrolet Silverado 1500?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history