Vehicle tipm shut off transmission while driving an cause a traffic jam on a busy intersection caused the transmission system to go in limp mode an no breaks. Was very dangerous lucky I had a hand break that worked cause engine to shut off an studder had to get towed an transported the vehicle home an got it inspected by a mobile mechanic an says the fuse box had blown internal components due to failing internal electrical components or weak points in the tipm system
The worst 2007 Dodge Caliber problems
Ranked by number of owner complaints. Mileage and cost come from what owners wrote.
Problems by type
Tap a problem to see which part fails, at what mileage and in which other years.
- Suspension255
- Electrical197
- Body158
- Acceleration104
- Steering98
- Engine94
- Lights93
- Transmission80
- Airbags46
- Fuel system44
- Brakes40
- Driver assistance21
- Visibility19
- Tires18
- Wheels18
- Seat belts15
- Locks3
- Seats2
Specific symptoms reported on the 2007 Dodge Caliber
Ball joint 141Headlights 92Stalling 78Check engine light 37Loss of power 35Grinding brakes 27Jerking 23Airbag light 21Wipers 21ABS 19No deployment 19Fuel pump 18Harsh shifting 15Won't shift 15Won't start 14Sudden acceleration 12Fire or smoke 11Hesitation 11Overheating 11Knocking 10Transmission failure 10Warning lights 8CVT failure 7Pulling 7Water leak 7Adaptive cruise 6Brake failure 6Door locks 6Coil spring 5Power steering loss 5Seat belt 5
Trouble codes owners of the 2007 Dodge Caliber mention
P0717 2P0722 2P1607 2P2006 2P2110 2
Recalls 4
Equipment
- What is wrong
- Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit:
- Risk
- If the fire extinguisher does not function properly, it can increase the risk of injury in the event of a fire.
- Remedy
- Chrysler will notify owners instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began February 14, 2018. Owners may contact Chrysler customer service at 1‑800‑853‑1403 or Kidde customer service service toll-free at 1‑855‑262‑3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. Chrysler's number for this recall is T82.
Recall number 17V824000 · Recall details
Vehicle speed control: accelerator pedal
- What is wrong
- Chrysler is recalling certain model year 2007 dodge caliber and jeep compass passenger vehicles manufactured from march 7 through may 19, 2006. The pivot bushings in vehicles with oversized accelerator pedal bearing pockets may become dislodged and potentially cause the accelerator pedal to bind or stick.
- Risk
- Should the pedal bind or become stuck, it can be overcome by smart brakes which override the accelerator pedal in certain conditions.
- Remedy
- Chrysler will notify owners and dealers will inspect and replace all affected accelerator pedal assemblies free of charge. The safety recall began on june 29, 2010. Owners may contact chrysler toll-free at 1‑800‑853‑1403.
Recall number 10V234000 · Recall details
Wheels: hub
- What is wrong
- Certain passenger vehicles equipped with rear disc brakes fail to conform to the requirements of federal motor vehicle safety standard (fmvss) no. 135, "light vehicle brake systems." the length of the rear wheel hub mounting bolts may prevent actuation of the park brake.
- Risk
- This could allow unintended movement of the vehicle under certain conditions and cause a crash without warning.
- Remedy
- Dealers will replace the rear wheel hub mounting bolts and repair the park brake free of charge. The recall began on may 8, 2007. Owners may contact daimlerchrysler at 1‑800‑853‑1403.
Recall number 07V196000 · Recall details
Service brakes, hydraulic: antilock/traction control/electronic limited slip: control unit/module
- What is wrong
- On certain vehicles, the antilock brake system (ABS) control module software may cause the rear brakes to lock up during certain braking conditions.
- Risk
- This could result in a loss of vehicle control and cause a crash without warning.
- Remedy
- Dealers will reprogram the ABS electronic control unit. The recall began on february 19, 2007. Owners may contact daimlerchrysler at 1‑800‑853‑1403.
Recall number 06V493000 · Recall details
See all 4 recalls for the 2007 Dodge Caliber
Defect investigations
Sticking Accelerator Pedal
In their Defect Information Report (DIR) of June 3, 2010, Chrysler Group, LLC (Chrysler) notified the federal safety agency that it will conduct a safety recall of approximately 25,265 model year 2007 Dodge Caliber vehicles and 71 model year 2007 Jeep Compass vehicles manufactured from March 7, 2006 through May 19, 2006.The recall will remedy a defect in the accelerator pedal assembly (accelerator pedal) of the Electronic Throttle Control (ETC) system that can cause the accelerator pedal to stick in an open position and not return to the idle position when released.As stated in the opening resume, the subject vehicles (Caliber) are equipped with an ETC accelerator pedal manufactured by the CTS Corporation, the same supplier of the ETC accelerator pedal used in the recently recalled Toyota vehicles.The ETC accelerator pedal used in Caliber and Compass vehicles is not the same as those used in the recalled Toyota vehicles.They are of a different design, were manufactured using different tooling, and fail in a different manner.According to Chrysler and CTS, oversized bearing pockets in the ETC accelerator pedal housing of the Caliber and Compass vehicles allows the accelerator pedal pivot shaft bearings to dislodge from the housing.If this occurs, the accelerator pedal can stick in an open position (i.e., fails to return to the closed position) or be slow to return.Chrysler's DIR notes that the subject vehicles are equipped with Smart Brake Technology and contends that the impact of a binding or sticking accelerator pedal can be negated by its Smart Brake system.In Chrysler's view, the system enables the brake pedal input to override the throttle control system and safely depower the vehicle and minimizes the potential for safety consequences resulting from the defect in the accelerator pedal.Further, Chrysler states, as a result of the presence of this technology, Chrysler Group LLC has concluded that the condition described in this report does not present an unreasonable risk to motor vehicle safety.ODI does not concur with Chrysler's position that the Smart Brake technology employed in the subject vehicles eliminates unreasonable risks to safety stemming from the ETC accelerator pedal defect.Aside from the fact that the technology is applicable only to situations where the brake pedal is activated, the Smart Brake system implemented in the subject vehicles will override a stuck throttle under a discrete set of conditions.Because driver behaviors (e.g., kicking at the accelerator pedal to dislodge it, or pumping the brake pedal instead of steady application) may delay or prevent activation of the Smart Brake system in the subject vehicles, ODI believes that this Smart Brake system does not totally eliminate unreasonable risks to safety posed by this defect or the necessity of a safety recall in this case.See Safety Recall file 10V‑234 for recall details.
PE10012
Technical service bulletins for the 2007 Dodge Caliber 53
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair...
- Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles
- Throttle body
- Disinfectant Solution Recommended for COVID-19
- Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the...
- Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard...
- Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to...
- Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision...
- Restraints Remove I-Sheet from packaging
- Service
2007 Dodge Caliber fuel economy
Official EPA estimates in miles per gallon (MPGe for electric). Ranges cover trims that share the same engine.
| Engine | Drive | City | Highway | Combined |
|---|---|---|---|---|
| 1.8L 4‑cyl | FWD | 24 | 29 | 26 |
| 2.4L 4‑cyl | FWD | 21-23 | 25-28 | 23-25 |
| 2.0L 4‑cyl | FWD | 23 | 27 | 24 |
| 2.4L 4‑cyl | 4WD | 20 | 24 | 22 |
What 2007 Dodge Caliber owners say
Most recent owner complaints, unedited.
The contact owns a 2007 Dodge Caliber. The contact stated that the ECU had been hacked. While driving on the highway at 70 MPH, the brakes applied without application, but I was able to move to the right lane. The vehicle was able to pull over safely, and it stalled. While parking with the foot on the brakes, the vehicle suddenly accelerated and crashed into a small pole. There was no reported fire, airbag deployment, police report filed, or injuries. While in neutral, the vehicle suddenly accelerated. The driver was able to shift to neutral. The vehicle was making an abnormal growling sound. There was no light inside. While using the headlights, the windshield wipers turned on for five minutes. After locking the vehicle, the headlights remain on. While using the turn signal, the windshield wipers engaged without application. While driving in the rain, the vehicle hydroplaned. The contact stated that someone stole the key fob, made copies, hacked into the vehicle, and was controlling the vehicle. The vehicle was taken to an independent mechanic for diagnostic testing, which confirmed the vehicle was working as designed. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not contacted. The approximate failure mileage was approximately 154,000. The VIN was not available.
I was informed on 09/29/2025 by my Chrysler dealer that a second critical component of my 2007 Caliber frame had rusted to the point that it broke. The first critical component was reported in my complaint tracking number 11459461 submitted on 04/03/2022. The component in that filing was the engine pan that supported the engine. On this latest failure, I was told the same thing by the shop manager: "If you hit a bump while driving this vehicle you could lose your back wheels". In the first incident, the engine could have fallen out of my vehicle. He was not going to let me drive it home. Then he changed his mind and told me it was "at my discretion". I did drive it home (4.5 miles) with no problem. He told me he was going to try and find a new or used part to fix the issue. He made it clear that he was not hopeful of finding one. This is twice now that my life and the lives of any drivers on the road at the same time were placed in danger from excessive rusting problems. I submitted files in the first incident showing that Chrysler was aware of the issue. A copy of the corporate service bulletin was attached. To my knowledge nothing was ever done. Is anything going to be done this time?
I was at a gas station and attempted to leave the lot and the cradle and/or attached parts broke into, rendering the car undrivable.
The contact owned a 2007 Dodge Caliber. The contact stated while driving at an undisclosed speed, the contact's vehicle was involved in a head-on collision, which was no fault of the contact. The contact's vehicle was damaged to the front of the vehicle and on the passenger's front side of the vehicle. The contact stated that the other driver's vehicle crashed into the contact's vehicle at a high rate of speed. The air bags did not deploy. The vehicle was towed to a local tow yard. The paramedics and the local Police arrived at the scene. A Police report was filed, however, the report number was unavailable. The vehicle was deemed a total loss. The contact was the only occupant in the vehicle. The contact was transported to the local medical center, however, due to the severity of the injuries and the specific treatments that the contact required, the contact was transferred to a medical center that specialized in the contact's required treatments. The contact-sustained injuries included but were not limited to traumatic brain injury, seizures, impaired speech, physical and mental disabilities, intermittent paralysis, damage to the spinal cord, and amnesia. The manufacturer was not made aware of the failure. The failure mileage was unknown.
My car is at 69739 miles and the control arms and the front and rear subframe is rotted out
This is a follow up to complaint #11459461 filed on 4/3/22 at 9:16:43am. I was not able to send documents at that time. Documents included relate to follow up on complaint #11591104. First pdf file: pages 1-4 Service bulletin from Chrysler - my model year not included; pages 5-7 service invoice and picture of missing engine cradle pan; page 8 original repair invoice; page 9 copy of original repair invoice with notations for Magna plant manager; page 10 notice of having received complaint; page 11 Defective lug nut issue; page 12 Complaint #11591104; page 13 Service invoice noting replacement of two defective lug nuts. Second pdf file: pages 1-2 Copy of original complaint #11459461; page 3 Copy of towing receipt due to defective lug nut. Third pdf file: Picture of three of four defective lug nut covers that I had to remove due to flat tires. First one not shown due to being damaged while attempting to remove beyond recognition. Upper left lug nut cover came off just in handling of removed lug nuts.
The contact owns a 2007 Dodge Caliber. The contact stated that while it was raining, there was water entering through the sunroof and doors into the vehicle. The air bag warning light was illuminated. The contact called the local dealer, who stated that there were no related recalls for the failures. The vehicle was not diagnosed or repaired. The manufacturer was contacted and stated that there was no recall coverage for the failures and the contact was referred to the federal safety agency Hotline to report the failures. The failure mileage was approximately 70,000.
The contact owns a 2007 Dodge Caliber. The contact received notification of the federal safety agency Campaign Number: 10V234000 (Vehicle Speed Control) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
The contact owns a 2007 Dodge Caliber. The contact stated while pulling into a parking space, there was an abnormal sound coming from the rear of the vehicle. The contact stated that upon inspecting the vehicle, he noticed that the subframe was severely rusted and there was a piece of metal hanging down in the rear of the vehicle. An independent mechanic inspected the vehicle and determined that the subframe needed to be replaced. The mechanic informed the contact that the vehicle was undrivable. The vehicle was not repaired. The dealer was not notified of the failure. The manufacturer was notified of the failure, but no assistance was provided. The failure mileage was approximately 175,000. The VIN was not available.
Compare the 2007 Dodge Caliber
Other model years
Questions about the 2007 Dodge Caliber
Is the 2007 Dodge Caliber reliable?
Owners have filed 884 complaints about the 2007 Dodge Caliber, 5.4 times a typical Caliber model year. It is one of the years we flag to avoid.
What is the 2007 Dodge Caliber year score?
The 2007 Dodge Caliber scores 12 out of 100 (poor). The score compares it with the other model years of the Dodge Caliber: 75 is a typical year, 50 means twice the usual complaints, and serious complaints and recalls lower it.
What is the most common problem with the 2007 Dodge Caliber?
Suspension, with 255 complaints, typically around 74,900 miles. Next is electrical (197).
How many recalls does the 2007 Dodge Caliber have?
4 recalls, covering equipment, vehicle speed control and wheels.
What gas mileage does the 2007 Dodge Caliber get?
Official estimates for the 2007 Dodge Caliber range from 22 to 26 mpg combined. The most efficient version (1.8L 4-cyl, FWD) gets 24 city and 29 highway.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2007 Dodge Caliber?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history