2022 Ford Bronco: screen or infotainment failure

Filed May 5, 2026 · Driver assistance · 27,800 miles · TX

The contact owns a 2022 Ford Bronco. The contact stated while reversing, the rear view camera displayed a blank screen. The vehicle was taken to the dealer where the contact was informed that the parts were unavailable. The vehicle was not repaired. In addition, the contact was informed that the parts were not going to be available until July 2026. The contact received a recall notification, the federal safety agency Campaign Number: 25V455000 (Back Over Prevention) however the parts were unavailable. The manufacturer was made aware of the failure but provided no assistance. The failure mileage was approximately 27,800.

Filed Apr 17, 2026 · Electrical · CO

Front Camera sometimes malfunctions and will not display, only black screen. A recall or customer satisfactory program has been issued for rear camera, but not for front Camera. This issue could be dangerous when pulling forward from a parking spot as view is partially obstructed by large hood. The Ford dealership quoted a replacement but failed to fix or replace under warranty.

Filed Mar 24, 2026 · Driver assistance, Fuel system · 15,000 miles · MA

The contact owns a 2022 Ford Bronco. The contact received notifications of the federal safety agency Campaign Numbers: 25V455000 (Fuel System, Gasoline), 26V124000 (Back Over Prevention), and 25V721000 (Seats); however, the parts to do the recall repairs were not yet available. The contact stated that the infotainment screen intermittently turned blank at start-up, causing the rear-view camera to fail while reversing. The dealer was contacted. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was approximately 15,000.

Filed Mar 2, 2026 · Driver assistance · 35,900 miles · LA

The contact owns a 2022 Ford Bronco. The contact was informed of the federal safety agency Campaign Number: 23V165000 (BACK OVER PREVENTION); however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact experienced the failure and became aware that the back-over prevention camera had malfunctioned, and a black screen was displayed. The failure mileage was 35,900.

Filed Feb 11, 2026 · Electrical · KS

What component or system failed or malfunctioned, and is it available for inspection upon request? - Display for backup camera freezes after putting vehicle in reverse. Yes, it is available for inspection. How was your safety or the safety of others put at risk? - The display freezes when putting the vehicle in revers and the initial image on display of what was behind the vehicle stays the same while moving. If something or someone moves behind the vehicle while moving the image does not update to show that something or someone is now behind the vehicle. Previously recall 23S48 was completed related to the issue but it did not resolve the issue. Vehicle was taken back to the dealer and the dealer informed me that it is a faulty APIM and not the backup camera and is therefore not covered by the recall. This is a significant safety issue and needs remedied regardless of what component needs replaced. Has the problem been reproduced or confirmed by a dealer or independent service center? - Yes Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? - Only by the dealer (Midwest Ford in Hutchinson, KS). Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? - No

Filed Aug 11, 2025 · Driver assistance, Fuel system · 39,000 miles · TX

The contact owns a 2022 Ford Bronco. The contact received notifications of the federal safety agency Campaign Numbers: 25V273000 (Back Over Prevention), 25V315000 (Back Over Prevention), and 25V455000 (Fuel System, Gasoline); however, the parts for the recall repairs were unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. The contact stated that after the initial start, the back over the prevention camera displayed a black screen until the vehicle was restarted. The failure was intermittent. While driving out of a grocery store parking lot at approximately 5 - 10 MPH and attempting to accelerate into oncoming traffic, the vehicle stalled. There was no warning light illuminated. The vehicle was pushed to a nearby parking lot with the help of the contact's spouse. The contact used a diagnostic machine to perform a diagnostic test on the vehicle. The DTC for a faulty fuel system was retrieved. The vehicle was towed to the dealer, who confirmed that parts for the recall repairs were not yet available. The manufacturer was made aware of the issues. The failure mileage was approximately 39,000.

Filed Jan 13, 2025 · Brakes, Electrical · OR

I pulled up to a parking spot and when I tried to brake to place my car into park my brakes would not engage and my vehicle kept moving forward. I had to slam my car into park to prevent from slamming into a barrier. My rear camera goes in and out of a blank screen when “backing up” or reversing.