I have put my 2020 ford explorer platinum in the ford shop several times because my cruise control has never worked properly. While using the cruise control it will reset to 85 mph whenever it chooses. This is a dangerous issue. Sames Ford dealership has looked at this issue 4 or so times with no fix. This issue needs to be addressed as my car is not the only one with this same issue.
2020 Ford Explorer driver assistance complaints
Page 3 of 7: complaints 41 to 70 of 180, newest first, as owners wrote them.
The contact owns a 2020 Ford Explorer. The contact stated that the back over prevention camera screen was black intermittently. The contact then received notification of the federal safety agency Campaign Number: 23V342000 (Back Over Prevention) and the vehicle was repaired; however, the failure persisted. The vehicle was returned to the dealer but was not diagnosed. The vehicle was not repaired. The manufacturer was made aware of the failure and opened a case. The manufacturer referred the contact to the federal safety agency Hotline to report the failure. The failure mileage was 52,700.
The contact owns a 2020 Ford Explorer. The contact stated that while operating the vehicle, the back over prevention camera malfunctioned and failed to display an image while the vehicle was in reverse(R). The cause of the failure was not yet determined. The local dealer and manufacturer were notified of the failure, but no assistance was offered. The contact stated that the vehicle had previously been repaired under the federal safety agency Campaign Number: 23V305000 (Back Over Prevention) for the failure. The failure mileage was 52,000.
The contact owns a 2020 Ford Explorer. The contact stated that while driving at various speeds, the vehicle hesitated while accelerating, and the message "Power Train Malfunction" was displayed. The vehicle was taken to the local dealer who diagnosed that the transmission was faulty and needed to be replaced. The vehicle was not repaired. Additionally, while operating the vehicle, the back-over prevention camera display screen failed to display an image, causing a visibility hazard for the driver. The camera was replaced on several occasions, but the failure persisted. The manufacturer was notified of the failure. The failure mileage was 9,000.
The contact owns a 2020 Ford Explorer. The contact stated that while in reverse, the camera screen went blank. There were no warning lights illuminated. The contact received notification of the federal safety agency Campaign Number: 23V342000 (Back Over Prevention). However, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was approximately 40,000. Parts distribution disconnect.
While in motion a 4wd fault is detected that also makes forward pre crash unavailable. The fault resets when the engine is cycled and remains out for sporadic amounts of time I.e one week, one month, three months... Due to the fault resetting the dealer is unable to confirm cause and the sporadic nature make it difficult to replicate. The dealer was given a DTC 0f C0631-7F but was not able to verify it do to the code not being present at time of service. There is an Internal Tech. service bulletin for said code but is only before if code is present at time of service
The contact owns a 2020 Ford Explorer. The contact received notification of the federal safety agency Campaign Number: 23V342000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that the camera showed a blue screen when the vehicle was shifted into reverse. The contact stated that the failure was intermittent. The failure mileage was approximately 29,000. Parts distribution disconnect.
On [XXX] I was driving my 2020 explorer east bound on [XXX] just past the [XXX] intersection in Aurora, CO when all kind of warning lights lit up on the dashboard. (Parking brake engaged, pre collision prevention system failure, ABS light, check break system and other warning lights as well) the vehicle had a hard time stopping when I applied brakes almost caused a collision. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The backup camera sometimes does not come on. The Bluetooth connection does not work. The dash screen which displays the camera view, radio, clock, etc will sometimes remain black while the car is on. Other times, the screen will not turn off when the car is off, even after opening the driver's door, causing the battery to drain faster.
My backup camera hasn’t been reliable for over 2 years. Also my audio and GPS do not work. If I put my phone in the car I cannot even answer it due to no audio. I believe it needs a download update. I have tried and tried but have not succeeded. In getting an oil change the mechanic told me it can only be done on a ford computer. This is wrong! I only have 36000 miles on it
I have had the blue screen sensors replaced 3 times. This has been a recall. Now my front camera is having an error code. Yeh blue screen came on while backing up and I hit a rock. They say it has been fixed but now it is still occurring with the radio freezing and the front camera producing an error. The dealer says there’s no current fix and they have an unable to reproduce it when it is at the dealership because it happens intermittently. I have had the driveshaft replaced and the transmission I am unable to trade this car and due to the multiple safety issues and transmission issues, this car has such a long repair history that it is priced up below market value. I am afraid that I am going to have another accident or something is going to freeze up at an in opportune moment and causes collision as it did before.
Drivers assist failed and caused me to cross lanes into the cable barrier on interstate 40 causing 18,000 dollars worth of damage now the parking assist no longer works
The contact owns a 2020 Ford Explorer. The contact stated that while driving at an undisclosed speed, the pre-collision assist, service engine, four-wheel drive service, and advancetrac service warning lights illuminated. The vehicle was taken to the dealer, who diagnosed a failure with the front axle. The vehicle was not repaired. After investigating the failure, the contact related the failure to Technical Service Bulletin: 21-2174. The manufacturer was notified of the failure but referred the contact to the federal safety agency Hotline for assistance. The failure mileage was 60,000.
FORD EXPLORER 2020 LIMITED ECOBOOST 4WD. Purchased this vehicle used in November 2023. Intermittently, the frontal crash warning goes off when there is no vehicle in front me. The front warning sensor did not beep as I tried to parallel park along a sidewalk. I gently hit a curb and had to have my tire replaced, seems like I hit it just right for a chunk to be taken out and threads were exposed. The rear back up camera and 360 view screen turns blue intermittently. I have the shut the vehicle off and turn it back on for it to properly function again.
The contact owns a 2020 Ford Explorer. The contact stated while reversing, the rearview camera image turned black or blue. A message indicating that the rearview camera was inoperable was displayed. The contact stated that the vehicle was taken to the dealer, where an unknown software update was performed several times; however, the failure persisted. The contact received notification of the federal safety agency Campaign Number: 23V342000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The local dealer was contacted and referred the contact to the manufacturer. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure and referred the contact to the dealer for assistance. The failure mileage was approximately 16,000. VIN tool confirms parts not available.
The contact owns a 2020 Ford Explorer. The contact stated that the brake warning light was illuminated. The brake pedal was engaged and continued to depress independently. After turning off the vehicle, an abnormal sound was detected. The contact stated that while driving, there was a line on the screen. The vehicle was taken to an independent mechanic and the contact was referred to the local dealer. The contact called the local dealer, but the vehicle was not diagnosed or repaired. The manufacturer was not contacted. The failure mileage was approximately 50,000.
The contact owns a 2020 Ford Explorer. The contact received notification of the federal safety agency Campaign Number: 23V342000 (Back Over Prevention). The contact stated that while the vehicle was in reverse(R), the rear-view camera screen was blue. The vehicle was taken to a dealer where it was diagnosed that the rear-view camera needed to be replaced. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was 5,000.
My backup and 360 camera repeatedly fails. It maybe works 1% of the time. Ford is aware and has no resolution for the problem.
The contact owns a 2020 Ford Explorer. The contact received notification of the federal safety agency Campaign Number: 23V342000 (Back Over Prevention) and 23V675000 (Power Train) however, the part to do the recall repair was not yet available. The local dealer was contacted and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.
Please refer Complaint Number: 11507564 Manufacturer promised to release a temporary remedy by mid august. Its November ,still no temporary fix nor permanent. Dealers give a fixed response of no parts available or no remedy. Attached is the recall letter that promised a temporary fix by aug 7,2023.
The contact owns a 2020 Ford Explorer. The contact stated that while driving at various speeds and whenever attempting to accelerate the vehicle would display a jerking sensation. It would jump as if it wanted to fail and or stall. power train malfunctioning, hill start pre-collision assist, front camera low visibility, as well as others, all had illuminated on the dashboard. The vehicle had been taken to the dealer who diagnosed that the all wheel drive module had failed and needed to be replaced. The vehicle was in the process of being repaired. The manufacturer was made aware of the failure and referred them to the federal safety agency. The approximate failure mileage was 34,412.
No recalls listed on this site for my vehicle, but the main center dash screen is failing about 40% of the time, preventing the back up camera from working intermittently.
The contact owns a 2020 Ford Explorer. The contact stated that after parking the vehicle, upon releasing the brake pedal, the vehicle started to roll backwards. There was no warning light illuminated. The contact stated that upon depressing the brake pedal a second time, the vehicle stopped. The contact stated that the failure had been recurring while parking the vehicle. The contact related the failure to the federal safety agency Campaign Number: 23V675000 (Power Train); however, the VIN was not included. Additionally, the contact stated that while driving at various speeds, the Lane Keeping Assist (LKA) steered the vehicle towards traffic. The contact stated that he was able to steer the vehicle back into the lane; however, the steering wheel was very resistant. The contact stated that the failure had occurred twice while driving. The dealer was notified of the failure and referred the contact to the manufacturer, who then referred the contact to the federal safety agency hotline for assistance. The vehicle was not diagnosed nor repaired. The failure mileage was approximately 60,000.
The camera system does not work and disables the reverse braking and other safety features while reversing. This is a safety concern as while backing up to a trailer I have hit it 2 times, as the image will freeze and seems as if there is still room to continue backing up. I have taken this 4 times for recalls (since 2020) and none of them resolved it.
Two days after purchasing the light warning alert system started coming on. CHECK SYSTEMS HEADLIGHTS WARNING comes on EVERY MONTH THEN THE HEADLIGHTS WILL GO OUT first the left them the right…Ford can’t fix the problem because they don’t know what and why this keeps happening. The lights have been replaced 4-5 times and reprogrammed. I have took it Ford dealership 7 times, and the last time I was told it can’t be fixed because Ford has to send an update for the electrical system… plus one for the back up camera going blue/black as well…..They also have to send an update program for the other warning as well….so no end to the problems to date…
The contact owns a 2020 Ford Explorer. The contact received notification of the federal safety agency Campaign Number: 21V735000 (Back Over Prevention) however, the part to do the recall repair was unavailable. The vehicle was taken to a dealer where it was diagnosed that the rear-view camera needed to be replaced. The vehicle was not repaired. The contact stated that the manufacture had exceeded a reasonable amount of time for the recall repair. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 20,000.
Vehicle would suddenly slam on breaks when breaking and stalled changing gears. We have had it looked at and it is in engine failure - the vehicle is only 3 years old.
the pre collision assist came on 10/09/2022 then On 10/02/2023 the pre collision assist warning light flashed 3 times on dash then went out drove to work when i started the car again the hill assist light came on abs light came on collision warning light came on4wheel drive light came on and little wrench light came on i could not change drive modes while driving the vehicle home the reduced power light came on and the vehicle ran slower got the vehicle home did feel safe driving it with system telling me failures and everything not working and called ford dealership asked if it was ok to drive with everything going on was told it was ok to drive was told i had to wait 3 weeks I called another ford dealership was told not to drive it and it had to be towed because it was unsafe and undriveable to dealership where it is being repaired for safety issues
When putting the vehicle in reverse the backup camera will cut out to a blue screen randomly. A recall was issued in May of 2023 and it is now October with no fix at all.
Intermittent non-functional backup camera and brake assist after ford dealer applied a fix for backup camera failure. Backup camera blue/black screen error was not present before dealer applied “fix”
VIN decoder
See the problems and recalls for an exact car
Buying a used 2020 Ford Explorer?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history