The contact owns a 2020 Ford Explorer. The contact stated upon starting the vehicle, a message indicating that the 360-degree camera was inoperable was displayed. The contact stated that the failure persisted while reversing. The contact also stated that the Blind Spot Information System (BLIS) that activated an indicator light in the side view mirrors when a vehicle was detected in the blind spot was malfunctioning as the sideview mirror indicator light failed to illuminate as needed. The vehicle was taken to the dealer, where the failure could not be duplicated; however, the failure persisted. The contact stated that the failure mostly occurred during cold weather. The contact received notification of the federal safety agency Campaign Number: 23V022000 (Back Over Prevention); however, the parts to do the recall repair were not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue and informed the contact that the recall was placed on hold on March 15, 2023. The vehicle was not repaired. The failure mileage was approximately 12,000. Parts distribution disconnect.
2020 Ford Explorer driver assistance complaints
Page 5 of 7: complaints 101 to 130 of 180, newest first, as owners wrote them.
The contact owns a 2020 Ford Explorer. The contact stated that while reversing, the rear-view camera displayed a distorted image. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure. The contact related the failure to the federal safety agency Campaign Number: 23V022000 (Back Over Prevention) however, the VIN was not included in the recall. The failure mileage was approximately 17,700.
The vehicles rear view camera randomly displays a blue screen on reverse backup. All sensors go failing at times. Attached are some screens over the month. I have taken this to a dealership for a most recent recall fix (02/01/23) and it seems this issue never gets fixed. I keep getting notices of recalls and they claim they will patch it with software fixes but there seems to be more serious sensor issues . When this happens in a school zone it feels dangerous. This is a leased vehicle and I haven't received much help even from the manufacturers dealerships. Didn't find anyone to even listen to these issues. If we try to manually reverse the emergency braking comes into play from nowhere and applies itself due to these malfunctioning of sensors.
What component or system failed or malfunctioned, and is it available for inspection upon request? Rear back up camera How was your safety or the safety of others put at risk? The loss of the rear camera image while in reverse has increased my risk of crash. Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? Yes, it has been to Holman Ford Turnersville many times for repair but the issue keeps occuring. I have been in touch with Ford directly and have two cases open. Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? No warnings or symptoms
The contact owns a 2020 Ford Explorer. The contact stated while reversing, the 360-degree camera view became inoperable. There was no warning light illuminated. The dealer was contacted but offered no assistance. The manufacturer was contacted and informed the contact that the warranty on the vehicle was expired. The vehicle was not repaired. The failure mileage was 59,000.
Braking system stopped working. I had no breaks on the Highway! All systems lit up on my dash. Thankfully I was able to coast down the side of road in neutral until the car stopped. Whole time I was holding the brake down to the floor. Upon stopping it automatically threw into park. I turned the car off and then started again and everything seemed fine. I was scared to death to even drive it any further. I took it to the dealership to have it looked at. I see this is a problem with 2020 explorers and it needs to recalled. Someone is going be seriously injured or even die in the event of a wreck from this issue
The contact owns a 2020 Ford Explorer. The contact stated while reversing, the back-up camera image turned blue. There was no warning light illuminated. The contact stated that the failure occurred intermittently. The contact stated that the vehicle was taken to the dealer where it was repaired under the federal safety agency Campaign Number: 21V735000 (Back Over Prevention) however, the failure reoccurred a week later. The vehicle was taken back to the dealer where it was diagnosed that the back-up camera failed and needed to be replaced; however, the recall repair did not include a back-up camera replacement. The contact stated that the recall remedy failed to repair the failure. The manufacturer was notified of the failure and informed the contact that they could not assist as the VIN was not currently under recall. The vehicle was not repaired. The failure mileage was approximately 29,000.
The rear view camera system will intermittently display a blue screen. Dealer service has downloaded new software updates with no success.
The contact owns a 2020 Ford Explorer. The contact stated that the back-up camera intermittently displayed a blue screen while in use. The contact had taken the vehicle to the dealer on numerous occasions where software was used to clear the fault codes; however, the failure would return soon after the update. The manufacturer had been notified of the failure and informed him that his vehicle was not included in the federal safety agency Campaign Number: 21V735000 (Back Over Protection). The vehicle was not repaired. The failure mileage was approximately 1,000.
Rear camera screen turning blue when in reverse. Incident where child on bicycle crossing driveway put in danger.Appears to happen in afternoon with sun exposer on side of vehicle where camera is located. Taken to Ford dealer and had to purchase new camera system. Rear automated lift hatch also began opening when unattended and triggering alarm if parked. In addition it has released once while driving and caused alarm. Circuit board replaced at my expense has not resolved the problem. Each issue has happened multiple times during September and October 2022
While driving on normal suburban roads, error messages appear on the instrument display every two to three days: 4WD Fault Service Required, Pre-Collision Assist not available, Service Advance Trac. The check engine light or wrench icon appears on the instrument display, and the stability trac icon appears on the instrument display. When this happens, the adaptive cruise control does not function. Safety of the vehicle and driver are impaired by major safety system(s) do not function, such as the stability control and the collision avoidance feature. I have brought the Explorer in to one dealer one time, and another dealer two times. A repair to the half shaft speed sensor has been performed twice, however the problem still persists. This problem first appeared on the vehicle in July of 2022 at 44,000 miles.
The Ford Explorer ST when shifting into reverse, sporadically, the backup camera presents a blue screen, preventing all visibility while attempting to drive in reverse. It appears that none of the warning signals are operational when getting close to people or objects when the camera isn't working, thus presenting a hazardous condition as all safety features do not function. Apparently, there are similar recalls on some Explorer models but my particular vehicle is one that is not included in the previous pool of vehicles that are eligible for the recall repair.
The contact owns a 2020 Ford Explorer. The contact stated while shifting into reverse the Back Over Prevention screen failed to operate as designed. Additionally, the vehicle would respond without the accelerator pedal being depressed. The contact also stated that while driving 35 MPH, the Forward Collision Avoidance warning system activated while there was no vehicle nearby. The contact stated that the vehicle was sputtering. There were no warning lights illuminated. The vehicle was taken to the dealer and the technician informed the contact that the brake assist was unavailable. The technician was unable to duplicate the failure with the Forward Collision Avoidance system. The vehicle was currently being repaired. The manufacturer was notified of the failure. The approximate failure mileage was 4,000.
The contact owns a 2020 Ford Explorer. The contact stated when the vehicle was shifted into reverse, there was no image displayed on the screen. The vehicle was taken to the dealer where the contact was informed that there was a recall for the failure. The contact stated a programming update was needed and was performed; however, the failure continued. The vehicle was taken back to the dealer where an update was completed several times; however, the failure persisted. The contact stated that the vehicle had been to the dealer at least 7 times to update the software. The manufacturer was notified of the issue and advised to go back to the dealer and a case was opened. The vehicle was taken back to the dealer for a 9-hour update. The contact stated that the dealer called and stated that the vehicle was out of warranty and the contact would be responsible for the repair. The VIN was not included in the federal safety agency Campaign Number: 21V735000 (Back Over Prevention). The approximate failure mileage was 28,000.
The backup camera display on the infotainment system when the vehicle is placed into reverse the screen illuminates in a blue screen not showing the surrounding area normally viewed. This issue was confirmed by Ford technician, an update to the system was supposed to fix the issue, the following day after the update to the vehicle, the same issue arose, I took the vehicle to the dealership, the issue was reproduced, the service writer documented the issue with a photo. This creates a backing safety issue as the proximity sensors where not working while in blue screen to warn of objects or persons while in reverse There where no warnings or onboard messages indicating an issue with the beck up camera This issue still has yet to been repaired by the dealership.
The contact owns a 2020 Ford Explorer. The contact stated that while driving with the auto-hold brake system engaged, the tires began to spin. The brake pedal was applied but the vehicle rolled and crashed into a vehicle. The charging system and engine warning lights were illuminated. There were no reported injuries, fire, or air bag deployment. A police report was filed. The vehicle was taken to the local dealer where it was diagnosed that the computer, AC unit, and wiring harness needed to be repaired. The vehicle was repaired but the failure recurred. The manufacturer was contacted and referred the contact to the federal safety agency Hotline. The approximate failure mileage was 32,000.
When engaging reverse the image on the screen turns solid blue. I can turn the vehicle off and back on and sometime this resoles the issue. It has happened at least a 12 times in the last couple of weeks. I did some initial investigation online and it appears that my vehicle is experiencing the same symptoms as a recall announced by Ford. https://www.consumerreports.org/car-recalls-defects/ford-and-lincoln-recall-2020-models-for-faulty-backup-cameras/
The contact owns a 2020 Ford Explorer. The contact stated while placing the gear shifter into reverse(R), the Back Over Protection screen turned blue. The side and front camera's functionality worked as intended. The vehicle was repaired under recall; however, the failure recurred several times. There were no warning lights illuminated. The vehicle was diagnosed at the local dealer with a defective camera. The camera was replaced. The manufacturer was notified of the failure. The approximate failure mileage was 50,000.
While driving on a busy , high speed road the pre collision error message came on the screen. It felt like the truck started applying brakes causing us to jerk. Although I tried I could not accelerate. Several error messages were sent to the ford app about the Powertrain. This put my kids and my safety in jeopardy. Our speed was greatly reduced and someone easily could have hit us. This is the second time I’m taking this truck in for service with the same problem. I have less than 25 k miles on this truck. This should not be happening.
Backup camera display shows intermittent blue screen.
When reversing the rear camera display turns blue and I'm not able to see anything behind me using the safety camera feature. I rely on the camera to assist with detecting people or objects in my blind spots while reversing and intermittently the display turns blue. There was a recall for this make and model and manufacture date, but the vehicle is not included in the recall. Recall information - Rearview Camera Recall 21C09. The dealership can't reproduce the issue because it's intermittent and there are no error codes, so they won't replace the camera. They've tried several software fixes but the problem continues. No warning messages displayed when the issue occurs. Thanks.
I have brought my vehicle to the dealership for repair of the Safety Recall for my car. They stated that they repaired the car. However the problem still exist. I have taken images and videos of the problem.
Reverse camera blue screen is appearing again after the 1st recall “fix”. Apparently this is becoming quite common, as I am in many Ford Explorer groups. Many others have this happening after their “recall fix” as well. Some even appear to have this happening after multiple times of recall “fixes”. Ford should be held accountable for not addressing a safety concern with a concrete solution. I have asked others within the groups to also submit incident reports.
Recall 21V735000 was performed by Sakelaris Ford of Rolla, Missouri on December 9, 2021. On February 28, 2022 the problem of the "Blue Screen" Backup Camera display again occurred and has been occurring regularly ever since. I have not yet contacted the dealer to reschedule a follow up pending correspondence from the federal safety agency.
My car warnings were malfunctioning as they were all flashing on briefly. The car has done this before and has other issues with the panel such as now it has the icon for camera visibility is not working. I cleaned each camera and the light is still on. I backed out of the driveway put the car in drive and started to accelerate. I stepped on the brakes and they were not working, I repeatedly tried to stop but they were gone. My car finally stopped (I was not far enough to have started to build any speed. I turned the car off and back on and the brakes were back on. This happened March 31st, 2022.
I have a safety recall notice 21S44/the federal safety agency RECALL 21V735 - 360 degree camera display, which includes the rear view camera may intermittently display a blue image on the media touchscreen upon shifting into reverse. Although your form said there was no recall on my vehicle I have received a notice mentioned above and I have experienced the problem mentioned in the recall notice a number of times. The Phil Long Ford Dealership in Colorado Springs on Motorcity .Drive have worked on the vehicle four times since the 1st of January and still have not repaired my vehicle. I would think that since this is a recall that they should have a fix by now. Any assistance you can provide would be greatly appreciated.
My rear camera works less than 50% of the time. It even goes out while backing up. I get a blue screen and my rear brake assist becomes inactive.
The rear back up camera area is blue and you are unable to see behind the vehicle.
The contact owns a 2020 Ford Explorer. The contact stated that while reversing, the rearview camera inadvertently turned blue. There were no warnings lights were illuminated. The contact received a recall notification for the federal safety agency Campaign Number: 21V735000 (Back Over Prevention) and the vehicle was taken to the dealer who updated the Image Processing Module software; however, the failure reoccurred 1-2 weeks later. The vehicle was taken back to the dealer who advised the contact that the rearview camera needed to be replaced and the repair would be completed at her own expense. The manufacturer was notified of the failure and followed up with the dealer. The manufacturer then called back but offered no further assistance. The vehicle was not repaired. The failure mileage was approximately 39,000.
Automatic Emergency Braking, Forward Collision Warning . The systems did not perform as they where designed to. No the problem was not looked at by the company.As far as I know Ford never looked at the vehicle. No warning of any kind showed up on the vehicle before the collision.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2020 Ford Explorer?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history