This vehicle has been “repaired” by Ford dealer per recall instructions but the backup camera is still intermittently blue. Recall “fix” offered by Ford does NOT fix this problem
2020 Ford Explorer driver assistance complaints
Page 6 of 7: complaints 131 to 160 of 180, newest first, as owners wrote them.
While driving in regular weather. The dash flags a red box that say pre Collison alert, and beeps. For no reason nothing around me. I know the sensor is located in the front end of the vehicle. Scares everyone in vehicle thinking we are going to have an accident and put o
I own a 2020 Ford Explorer (Platinum edition). A recall was issued for the back-up camera. My car had been having issues of intermittent camera problems prior to the recall. I took my car into Sam Pack's Five Star Ford of Lewisville (1144 N Stemmons Fwy, Lewisville, TX 75067) for the recall repair. . . I drove the vehicle for about thirty minutes after completion of the recall repair at which time I parked the car. Unfortunately, when I did so the "Blue Screen" returned. The was the reason for the recall. . . This is the same as prior to the recall "repair". Also, when this happens a warning pops up "Reverse Brake Assist Not Available" (this may be because the camera is malfunctioning). The camera does not do this all of the time. There is no rhyme or reason as to when it is going to fail. After turning the car off for a while (as when eating at a restaurant or grocery shopping, etc.) the camera works when you put the car into reverse (with the one exception noted above). It appears that the "fix" for the recall is insufficient to stop the camera errors from recurring. The incident date listed below is the date of the supposed recall repair. I have uploaded a PDF File showing pictures of the camera errors. If you would like any other information, or pictures of the blue screen errors, please do not hesitate to contact me. I can be reached by email at [XXX] or by phone at [XXX]. INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
Rear backup camera incorrectly sensed an obstruction behind vehicle and caused emergency braking with no visible obstruction. We were unable to pull out of the parking spot and had to jump a curb to leave. No further incident has been experienced,
The contact owns a 2020 Ford Explorer. The contact stated that while attempting to reverse the vehicle, the backup camera failed to function as designed. The contact stated that the backup sensor non-functional message was displayed. The vehicle was taken to a local dealer and was diagnosed IPMB updated and repaired. Upon investigation, the contact associated the failure with the federal safety agency Campaign Number: 21V735000 (Back Over Prevention). The vehicle was repaired under the recall but continued to experience failure. The manufacturer was not informed of the failure. The failure mileage was approximately 10,000.
Ford issued recall 21S44 for an intermittent back-up camera problem. I took my vehicle to Elk Grove Ford (95624) on 10/05/21 for recall repair. The problem continued and I took back on 10/19/21 to fix back-up camera. It still only works intermittently. Today, while backing up at an elementary school after my second recall service, my camera failed again. This is a critical safety issue which Ford knows about but has provided incompetent information to Elk Grove Ford. [XXX] INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
Back up camera image distorts goes black at times but goes blue multiple times a day while driving and putting in reverse camera is blue 90% of the time
The contact owns a 2020 Ford Explorer. The contact stated while operating the vehicle the backup camera display image was very washed out, unclear and the colors appeared to be bleached out causing visibility issues for the driver. The vehicle was taken to the local dealer who replaced the camera display unit, but the failure persisted. The manufacturer was also notified of the failure. The failure mileage was 2,000.
Backup camera failed with a blue screen that was initially identified early August and brought into Ford 8/11-13 but dealership unable to reproduce problem. It is believed that the dealership re-booted the computer and downloaded new software. The same problem occurred just two days after we got the car back on 8/15 at which time a picture was taken to show the service department. A Google search suggested there was a problem with the back up camera for 2020 Explorer, but there was no recall on my VIN. After reaching out to Ford soon after we got the car back, a service person offered to order a new camera, but it was never approved. Numerous calls were placed to the dealership given ongoing camera failure and concern for causing an accident, but we were told that the problem needed to be reproduced. The camera could not be ordered. While backing the car out of our driveway without an operational camera or sensors, driver side rear bumper collided with a car parked in the street. The insurance company was notified the day of the accident and the car was taken to Ford body shop 9/21 where a repair estimate was provided. The dealership service department was notified that the car was involved in an accident because of camera failure and finally agreed to order a new replacement camera. On 9/23, we were notified of a "blue screen" back up camera recall.
I had an issue with the rearview backupcamera. The camera kept going out multiple times. I asked Fodd customer care if there was a recall and told me no. One day I was backing up at night my camera went out and I hit a mailbox which was in my blindspot I immediately called Ford to alert them that the camera went out a d I damaged my vehicle. Ford requested that I bring in my truck and changed the camera. They found out the camera had an electrical shortage. I attempted to get Forx to pay for the damages to my vehicle and they refused. The total estimate was 2700.00. The response why they denied my claim was I had an accident and they were not responsible regardless of the camera not working. They told me to contact my insurance to fix the damage. I feel I wouldn't have had an accident if my rearview camera did not go out. The backup assistance beep would have sensed the object behind me in my backup view and I would not have damaged my vehicle since the object was in my blind spot. I feel that Ford is responsible for the repairs and I have Video proof that my camera was having issues prior to my accident. I need Ford to fix my vehicle at no cost to me. They are ignoring the fact that the backup camera and blinspot assistance failed.
The contact owns a 2020 Ford Explorer. The contact stated while attempting to reverse the backup camera failed to engage. The contact stated that there was no warning light illuminated. The vehicle was taken to a local dealer where it was diagnosed with needing the Intelligent Platform Management Bus (IPMB) flashed. The vehicle was repaired. Upon investigation, the contact associated the failure with the federal safety agency Campaign Number: 21V735000 (Back Over Prevention). The vehicle was repaired but continued to experience the same symptoms. The manufacturer was informed of the failure and spoke with the contact’s attorneys and was awaiting a response. The failure mileage was approximately 22,900. Consumer stated camera was replaced 4 times and reprogrammed twice.
Reverse camera turns blue on many occasions and other times it gets dark, the engine in the mornings the engine sounds like a Diesel car in the dealer indicate it is normal but new vehicles do not sound that way.
We have returned the vehicle to the dealer 4 times for back-up camera / rear sensor failure. Most recently they had the vehicle from 8/16/2021 to 8/20/2021. Allegedly they replaced the back-up camera. On 8/27/2021 upon returning home from an approximately 3 mile drive, the back-up camera again failed while backing into our driveway. The DIC displayed the message "Back up assistance unavailable." While on vacation in Colorado, the back-up camera failed every day for 2 weeks (8/01/2021 - 8/13/2021). The failure would occur after extended drives at highway speed. On one occasion, the back-up display flickered between the image, blackout, and blue screen. On one occasion both the backup display and the overhead 360 display, displayed only blue screens. Turning off the vehicle and leaving it sit for 30 minutes or more clears the problem. The dealer claims they are unable to reproduce the problem. I have repeatedly told them that the vehicle must be driven for the problem to present itself. Repeatedly starting and shutting off of the vehicle while stationary will NOT produce the problem. We have repeatedly supplied images of the interior display showing the problem. This situation poses risk when reversing from parking place into oncoming traffic.
Back up camera not functioning properly. Back up camera will intermittently show distorted image while backing up and then it turns to black screen with warning stating "Camera is unavailable. Please contact your dealership."
Rear view camera not working. Dealer has confirmed however not able to get replacement part from manufacturer. Camera has been down for over 9 months.
The contact owns a 2020 Ford Explorer. The contact stated while reversing the vehicle, the back over protection screen turned blue and the contact was unable to see the road. The contact stated that the reverse brake assist warning light was illuminated. The contact took the vehicle to the local dealer ten times within 11 months, but the mechanic was unable to diagnose the cause of the failure. The vehicle was not repaired. The manufacturer had not been informed of the failure. The failure mileage was approximately 5,100.
Rear view mirror keeps turning solid blue ( blank ) and message center on the dash says "rear brake assist not working".
The contact owns a 2020 Ford Explorer. The contact stated the day he purchased the vehicle, the rearview camera turned blank as he was reversing out of the dealer parking lot. The warning message "Back Up Brake Assist Is Not Functioning" appeared on the instrument panel. The dealer diagnosed that the rear-view camera needed to be replaced. The contact stated that the vehicle was repaired however, the failure recurred while driving. The vehicle was taken back to the dealer and was repaired, however the failure persisted. The vehicle was taken back to the same dealer. The manufacturer was made aware of the failure and informed the contact that the VIN was not included in the federal safety agency campaign number: 20V575000 (Visibility) due to the manufactured date. A case was opened and the contact was referred to the federal safety agency for assistance. The vehicle was not repaired. The approximate failure mileage was 10. Consumer stated 5th camera has been installed.
Vehicle would not start and every warning lamp and alert triggered on the dashboard. Tried remote start which was successful, but vehicle shut off 5 seconds later and the above alerts/warning lamps repeated. Vehicle would not start and just repeated all of the warning lamps/alerts. Waited 20 minutes, car started without issue; however, when put into reverse WITH FOOT ON THE BRAKE the vehicle started to drive backwards WHILE FOOT WAS STILL ON THE BRAKE! No amount of pressure on the brake pedal stopped the vehicle. Had to depress and repress the pedal to stop the vehicle. Rear cameras failed to activate as well. Luckily no one was injured. This is the third time this has happened, the third time I have reported to the federal safety agency, and the third time I have reported it to my local dealership without resolve.
Rear camera will intermittently cause the screen to display distorted or total blue screen upon placing the vehicle in reverse
On two separate occasions while using the cruise control, the vehicle continued to receive warnings on the dash that the 4-wheel drive, hill assist, emergency braking, etc. were all unabled and service would be required. The cruise control then also disabled and I was unable to use it again until I pulled over, stopped and re-started the vehicle. Upon doing this, the system seemed to reset and all warning lights went off. I contacted a local Ford dealer about this issue and was told that their loaner 2020 Explorer has the same issue and they're unable to pinpoint the problem. They've had it in and out of service for 4 months. Their machine is unable to find any errors. They feel like it may be something to do with the body control module. Since my vehicle is apparently not the only 2020 Explorer experiencing this issue, I thought it would be worth reporting.
This issue has happened 4-5 time in a years time. When driving with cruise control and lane assist enabled the car will pull to the left when it see's a dark line in the road. If i were not holding on to the steering wheel I would have been in the lane next to me. I think what's going on is lane keep or lane assist thinks there is a curve in the road and tries to correct for it. Its just a matter of time before a crash happens to a Explorer owner. I have been to the dealership 3 time for this and called Ford but they don't seem to care.
Reverse camera has displayed very dark once. Reverse camera has displayed solid, bright blue multiple times. Gauge cluster displayed warning message that reverse assistance is unavailable.
Vehicle started, but then every warning lamp and alert triggered on the dashboard and engine shut off. Would not restart, but would just cycle through error/alert messages. Waited 15 minutes, car started but upon putting it in reverse WITH FOOT ON THE BRAKE the car started to drive backwards. No amount of pressure on the brake pedal stopped the car. Had to depress and repress the pedal to stop the vehicle after shifting into gear. Rear cameras failed to activate as well. Thankfully, no one was behind the vehicle and injured. This is the second time this has happened and the second time I have reported to the federal safety agency. The Ford dealership is oblivious to the root cause of the issue. Their quick fix is a battery replacement and software reload.
Rear camera goes blue,
The backing aid camera turns blue out of nowhere when put in Reverse gear, which causes the parking warning system to fail, the forward collision warning turned on by itself while driving on the freeway, there were absolutely no cars or objects in front at the time, causing the SUV to abruptly come to a complete stop, putting my self and my family at risk of being hit by a vehicle in the back. this is absolutely unacceptable.
1. Powertrain/Transmission: The transmission starting slipping and having hard shifts. When I would slow the car to turn or stop, it jerked at 30mph, 20 mph, and again at 15-10mph. Then it started hard shifting when you put it in Drive, and again at each shift. It wouldn't go over 55mph. The Powertrain Failure light(orange wrench) and Fordpass Notice finally came on a week and a half after the issues started. Shortly after the light cam on the car would not go in Reverse. There is a recall on the Powertrain in 2020 Explorers, however my VIN # does not show any recalls. I have an infant that is in the car with me usually. I am afraid for her to travel with me now in this vehicle, even once Ford tries to "fix" the issue because the warning light does not appear until the Powertrain is completely gone. I feel that the sensor should go off when it notices the transmission is having issues. This vehicle is now at a Ford dealership to be repaired. *2. Rear-view back up camera: Camera works 20% of the time. The screen is blue or the image jumps severely. It was taken to a Ford dealership and they said it didn't happen when it was there so they did nothing to fix it. There is a recall on this feature however my VIN # does not apply. *3. A/C: The air-conditioning unit fails to cool the air. The AC unit blows humid air. *4. Screen/display: The screen in the center console will go black and the steering wheel buttons will not work on the radio or bluetooth phone capabilities. The hands free phone option was not available during these system blackouts. 5. Park-aid sensor: The parking sensors in the front bumper keep falling out and go off making it seem like I am an about to hit something. I had to pop them back in place at least twice. *A Ford dealership has tried to address these issues already. However, these features still do not function properly on the car. If the feature "worked" while it was in the repair shop then they said they couldn't fix it.
The backup camera intermittently does not work when we put the vehicle in reverse. We estimate that it fails to work 10-15% of the time. The screen turns blue and we cannot use the camera to see what is behind us. We rely on the camera because the overall visibility to see behind the vehicle is poor. We believe that this issue is similar to the problem that LED ford to recall other vehicles. Our vehicle is not included in those recalls.
Car jerks from 1st to 2nd gear and sometimes 2nd to 3rd. Also, very long delay when putting the car into reverse. Takes anywhere from 5-10 seconds sometimes to shift into reverse.
Previous complaint of 11394378, they tried to fix it by changing valve body for transmission. That didn't work so now I'm needing a new transmission. Been with them for over a month. They are working on it, but still an issue at this time.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2020 Ford Explorer?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history