2008 Freightliner Sprinter 2500 problems

What is wrong

Daimler Vans USA, LLC (DVUSA) is recalling certain 2007-2009 Freightliner and Dodge Sprinter 2500 and 3500 vehicles. These vehicles are equipped with certain air bag inflators assembled into the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Risk

An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

Remedy

DVUSA will notify owners, and dealers will replace the passenger side frontal air bag, free of charge. The recall began on September 29, 2017. Owners may contact DVUSA customer service at 1‑877‑762‑8267. Note: This recall fully supersedes recall 15V‑354 and partially supersedes recalls 16V‑379 and 17V‑025.

Recall number 17V478000 · Recall details

What is wrong

Daimler Vans USA, LLC (Daimler Vans) is recalling certain model year 2007-2009 Dodge Sprinter 2500 and 3500 vehicles manufactured July 1, 2006, to July 31, 2008, 2007-2014 Freightliner Sprinter 2500 and 3500 vehicles manufactured July 1, 2006, to July 1, 2014, and 2010-2014 Mercedes Benz Sprinter 2500 and 3500 vehicles manufactured July 1, 2010, to July 1, 2014. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to rupture.

Risk

In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.

Remedy

Daimler Vans will notify the Mercedes-Benz and Freightliner owners and Fiat Chrysler will notify the Dodge owners. The respective dealers will replace the driver frontal air bag inflator, free of charge. The recall began March 31, 2017. Mercedes-Benz and Freightliner owners may contact Daimler Van's customer service at 1‑877‑762‑8267. Dodge owners may contact Fiat Chrysler customer service at 1‑800‑853‑1403.

Recall number 16V077000 · Recall details

What is wrong

Mercedes-benz is recalling certain model year 2008-2011 2500 and 3500 sprinter vehicles equipped with an optional three-seat bench in the passenger compartment. The seat benches in the second seating row may have been equipped with safety belts that do not meet the minimum requirements of federal motor vehicle safety standard 208, "occupant protection in interior impact," and motor vehicle safety standard 209, "seat belt assemblies." first, those safety belts may not lock as required. Second, the assembly loop may not perform to minimum force requirements.

Risk

In the event of a crash, the safety belts in these vehicles may not perform as required such that a seat occupant may not be properly restrained, increasing the risk of injury or death in the event of a crash.

Remedy

Mercedes-benz will inspect and replace any seat belt assemblies that do not meet the requirements free of charge. The safety recall began on july 15, 2011. Owners may contact mercedes-benz at 843‑695‑5000.

Recall number 11V210000 · Recall details

What is wrong

Sprinter is recalling 246 my 2008 dodge or freightliner 2500 trucks. The rear axle spring leaves were produced with an incorrect raw material. Therefore the leaves are thicker than the serial components.

Risk

The rear axle springs may fail earlier than designed increasing the risk of a crash.

Remedy

Dealers will inspect and replace the rear axle springs free of charge. The recall began on november 3, 2008. Owners may contact sprinter at 1‑843‑695‑5000.

Recall number 08V347000 · Recall details

What is wrong

Chrysler/sprinter is recalling 727 my 2007-2008 dodge and freightliner sprinter 2500 passenger vans equipped with 144 inch wheelbase and standard roof height. These vans fail to comply with the requirements of federal motor vehicle safety standard no. 201u, 'occupant protection in interior impact.' some vans may not have had certain head impact protection pads installed at the c-pillar.

Risk

In the event of a vehicle crash, personal injury to occupants may occur.

Remedy

Dealers will inspect the vehicles and, if the head impact protection pads are missing, the appropriate pads will be installed. The recall began on april 9, 2008. Owners may contact sprinter at 1‑800‑853‑1403.

Recall number 08V109000 · Recall details

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

EA21002