2011 Mercedes-Benz ML500 technical service bulletins
74 technical service bulletins and manufacturer communications cover the 2011 Mercedes-Benz ML500.
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- Repeat workshop visit for vehicle vibration while braking from 60MPH. NOTE: Although the symptom is...
- Clanking noise from the area of the speakers in the doors
- Single throttle lift-off clunking noise from the side shaft when moving off (audible at the outboard end)
- Headlamp, front fog lamp leaky or fogged
- Headlamps leaking or fogged
- Single throttle lift-off clunking noise from the side shaft when moving off (audible at the outboard end)
- Headlamp, front fog lamp leaky or fogged
- Vehicle with atypical reduced heat output
- During a phone call, the called party has difficulty understanding/cannot understand the driver, or...
- Windows of the front doors poorly adjusted/sluggish
- Single throttle lift-off clunking noise from the side shaft when moving off (audible at the outboard end)
- Single throttle lift-off clunking noise from the side shaft when moving off (audible at the outboard end)
- Washer fluid system leaks
- Headlamp or front fog lamp leaky or fogged
- Electrical system
- In our continuing efforts to ensure the proper performance and quality of your vehicle, we are writing to...
- Rear lamps fogged up/not leaktight
- Engine and engine cooling
- Crease formation on genuine leather seat covers in vehicles with low mileage ⢠Objects left on the seats...
- Armrest In Center Console (Front) Only Opens On One Side Or Not At All
- Creaking noise from fixed glass section of panoramic roof in area of rear passenger compartment grab handles
- To enhance the satisfaction of our customers, avoid further costs of litigation and return focus to its...
- Throttle lift-off clunking noises at drive shafts of rear axle
- Oil in engine wiring harness
- No cooling output, fault code 9006 stored in air conditioning control unit.
- Engine diagnosis warning lamp lights up in instrument cluster, fault code U145400: "Implausible data were...
- Noises from the mounting of the rear weight sensing system (WSS) sensors
- Pneumatic comfort systems with insufficient performance, entirely inoperative or leaky.
- Noise in center console area of W166.
- Side windows may make noises when closing and opening, or reverse direction when closing.
- Xentry (mercedes): after engine has started, several issues occurs, an acoustic warning sounds is heard,...
- Xentry( mercedes): blind spot inoperative
- Minor leaks at the oil duct of the left or right cylinder head of engines 157, 276 and 278
- Engine rattling noise after engine start for several seconds
- Creaking noise when making vertical or longitudinal adjustment to electrical steering column
- Engine diagnosis warning lamp active
- Xentry (mercedes): the side markers continuously lights up, due to damaged esd of driver circuitry side...
- This Customer 1 Action has been initiated because certain mbrace subscribers were recently contacted by...
- Engine diagnosis warning lamp lights up
- Message in instrument cluster "DISTRONIC PLUSCurrently Unavailable
- This Service Campaign has been initiated because Daimler AG (DAG), the manufacturer of Mercedes-Benz...
- Xentry (mercedes): control units installed, under driver/front passenger seat, has water entering tray,...
- Xentry (mercedes): between the front bumper to interior wiring harness, there may be corrosion at...
- Thumping noises from front axle when driving over bumps on road.
- Since 12/2012 (model 166) and since 06/2013 (model 242) the glass breakage loops are no longer in the side...
- Customer experiences low battery conditions, resulting in jump starts, and eventually requiring battery...
- The COMAND unit does not start or the COMAND display remains dark
- If it is necessary to replace an HV battery, the return will only be accepted with the filled-out...
- Xenon burner inoperative or flickers
- Xentry (mercedes): rattling noise coming from the area of the steering column tube system, when driving...
- Mercedes-benz: at the front wheel bearing there is a loud knock sound when going around a corner at slow...
- Mercedes (xentry): due to amine deposits from steering wheel foam, horn plate of steering wheel, short...
- Xentry(mercedes): bulletin provided regarding control unit detecting an undervoltage after buckling up...
- Mercedes-benz: the steering is leaking in the input shaft, below the protective cap
- Mercedes-benz: the steering is leaking in the area of input shaft, because of wear on a seal ring
- Mercedes benz: 2011 164
- Mercedes-benz: installation information of bolted wheel connections
- Mercedes-benz: there is the possibility of multiple brake warning messages displayed
- Mercedes-benz: the auto-transmission switches to limp home mode or has no power
- Mercedes benz: the turn signal light on the mirror fogs up due to temperature differences
- Mercedes-benz: there are defective connecting cables that are draining the airmatic compressor causing the...
- Mercedes-benz: the load compartment roller blind has catch bolts loose or broken from improper force when...
- Mercedes-benz: diagnostic procedures for the driver authorization system
- Mercedes-benz: the starter clicks but does not crank when trying to start
- Mercedes-benz: software update for heater lines
- Mercedes-benz: shock absorber procedure
- Mercedes: update software for the power electronics control module
- Xentry (mercedes benz): replacing exterior light bulbs
VIN decoder
See the problems and recalls for an exact car
Buying a used 2011 Mercedes-Benz ML500?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history