Check a VIN

March 16, 2026 Service bulletin

Complaint Frequent rear view camera flap actuations and/or noise associated

Mercedes-Benz technical service bulletin LI54.71-P-080180 for 2020-2024 Mercedes-Benz GLE 350, 2020-2024 Mercedes-Benz GLE 450 and 2021-2022, 2024-2026 Mercedes-Benz Gle 350 4matic and others.

Bulletin number
LI54.71-P-080180
Component
Unknown or other
Summary
Complaint Frequent rear view camera flap actuations and/or noise associated. NOTE: Rear view camera functions are NOT affected and still perform in accordance with regulatory requirements. This is only for customer satisfaction purposes. Cause This is not a malfunction, but an intended system behavior. Calibration of the reversing camera is in progress. Remedy For customer satisfaction purposes, an optimization has been implemented to reduce the quantity of rearview camera flap actuations for calibration. Update both control units and perform on SCN coding: • A26/17 (Head Unit) • N62/ (PARK Control Unit) IMPORTANT: After both control units have been SCN coded, the "Movable 3D View" feature in the head unit will no longer be available. With this change there will be two distinct differences: 1) The "3D" icon when in the top down vehicle view, will no longer be present on the head unit. 2) The digital rendering of the vehicle with the ability to spatially move around the vehicle is no longer possible. This view is replaced with 2D static images of the left and right sides. Prior to releasing the vehicle, please verify the following: • Rear camera flap when calibrating after a key cycle bus sleep will stay open to 29 MPH and then close. Will reopen, when calibrating, at 9 MPH. • The head unit screens mentioned above appear the same as "View AFTER SCN Coding" as shown in the attachment.

Vehicles covered

VIN decoder

See the problems and recalls for an exact car

Buying a used Mercedes-Benz GLE 350?

Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.

Check its history