The contact owns a 2018 Dodge Journey. The contact stated that while driving at an undisclosed speed, the engine shut off without warning, causing an immediate loss of power steering and power brake functionality. The contact maintained control and guided the vehicle to a stop safely. After several attempts, the vehicle restarted. The manufacturer was notified of the failure. The failure mileage was 100,000.
Dodge Journey power steering loss problems
76 of the 5,299 owner complaints about the Dodge Journey describe loss of power steering, most of them for the 2010 model year.
- owner complaints
- 76
- worst model year
- 2010
- typical mileage
- 68,695
By model year
Often reported together
Loss of power 29Stalling 18Brake failure 8Check engine light 7Won't start 2Engine failure 2Sudden acceleration 1Steering noise 1
Trouble codes mentioned
P0365 1P0016 1
What owners say
Power steering hose ruptured after a few days of snow and ice. I went to drive to the store but was unable to turn out of the driveway due to no power steering. I done some research to where I found out there was a recall for this same issue but evidently my VIN # isn't included in this recall as while as many others I have read about online. I think this needs to be looked into.
The contact owns a 2009 Dodge Journey. The contact stated that while reversing in cold weather, the vehicle lost power steering functionality. Upon inspection, the contact became aware that the power steering hose was leaking fluid and had detached. There were no warning lights illuminated. The contact related the failure to the federal safety agency Campaign Number: 16V273000 (Steering). The vehicle was towed to the local dealer, and the contact was informed that the VIN was not associated with the recall. The vehicle was not diagnosed or repaired. The manufacturer was contacted and confirmed that the VIN was not included in the recall. The approximate failure mileage was 77,000.
Power steering return line ruptured in cold weather causing loss of steering.
I was driving to work and after about 15 minutes of driving at around 45 miles an hour my car stopped accelerating when I pushed on the gas. Shortly after that my wheel locked and the power steering went out. Once I got myself on the side of the road the car would not turn off and I had trouble putting it in park. After a few minutes I was able to turn the car off and they called a tow truck to take me to a mechanic. The tow truck driver was able to restart the car and get the car in neutral to tow it to a mechanic.
Power steering leak, started in cold weather. Found other 2018 models have had a recall for the same issue - but my vin is not listed. Yes the vehicle can be inspected. No I’ve not had it looked at, I’ve been refilling the power steering fluid regularly and it leaks out. If the leak persists and the power steering goes completely out while operating it could put myself, passengers and others at risk. No warning lamps. I just noticed the steering was difficult.
The contact owns a 2016 Dodge Journey. The contact stated that while driving approximately 40-45 MPH and turning the steering wheel to the left or to the right, the steering wheel was resistant. The contact stated that the failure progressively increased, and the steering wheel completely seized. The vehicle was towed to a certified independent mechanic, where it was diagnosed with power steering failure. The mechanic performed unknown repairs on the vehicle; however, the failure recurred while driving approximately 40 MPH. The contact was able to drive to the residence. The vehicle was taken back to the independent mechanic. The vehicle was not repaired. The manufacturer was notified of the failure and confirmed that the VIN was not included in the federal safety agency Campaign Number: 16V273000(Steering). A case was filed, and the manufacturer referred the contact to the federal safety agency Hotline to file a safety complaint. The failure mileage was approximately 36,000.
Since buying my car, it has completely shut off while driving down the street 3 times with the key still in the run/on position. When it has done this I've lost power steering, power braking and complete power loss. The 3rd time this happened while I was taking my children to school and almost caused us to crash so I called a local locksmith, because I thought it was my key because the remote functions (lock, unlock, panic, and remote start) had stopped working also, paid for a new key and programming, only to find out it wasn't just the key, it was also the wireless ignition node module was defective too so I had to have it replaced and programmed as well. The locksmith asked my permission to disassemble the WIN module to inspect it for the cause of the problem and he said that there was a bad contact point inside that was breaking connection and causing the shutdown. I had to pay $1000.00 for these parts and service and I no longer have access to the module that was originally in my car since he took it apart. Thank God I managed to avoid any accidents when these incidents happened. The first time was in March of 2025
I went to go start my vehicle to commute home from work and had no power steering. I did some research and saw that my vehicle model from 2007-2016 was recalled for this issue
While driving the car, car stalled and began displaying the lightning bolt icon on the cluster. The power steering stopped working and the brake was very stiff and hard to depress. I pulled off the road and waited a few minutes and started the car again. The idle was very rough, icon was still displayed on the cluster, and car began jerking and stalled again. I had the vehicle towed to the house and began looking into the issue. Error codes read on the car was P0365: Camshaft Position Sensor “B” Circuit, and the red lightning bolt indicating an issue with the electronic throttle body. The battery was taken out and tested bad so it was replaced. The throttle body was cleaned and tested good. When I tried to start the car after the codes were cleared, the vehicle attempted to start but wasn't able to turn over fully. The P0365 code returned. I then had a mechanic come check out the car to see if he could do anything to help. He determined that the valves in the engine were bent and the cars timing was off. With all of this being said, This issue I am complaining about is the P0365 Camshaft sensor code. There was a recall for the camshaft sensors in some 2016 Dodge Journeys but my VIN did not fall in that range. When I called FCA, I was told there was nothing to be done because my VIN wasn't included in the recall. A bad camshaft sensor would cause all of the issues that I am experiencing with the car. If the sensor is bad or doesn't perform as it should, it could effect the overall timing of the engine's firing sequence, causing stalling, failure to start, and damage to the engine, like in my case with the bent valves. This incident posed a severe safety risk to myself and the other drivers around me due to the loss of power steering and partial loss of braking ability. Luckily this incident did not occur on the interstate or major highway, where there are speeds in excess of 55 mph.
Related recalls
Steering: hydraulic power assist: hose, piping, and connections
- What is wrong
- Chrysler (FCA US LLC) is recalling certain model year 2009-2016 Dodge Journey vehicles manufactured July 31, 2007, to November 12, 2016. After exposure to cold temperatures, the power steering return hose may rupture at engine start-up causing a loss of power steering assist.
- Risk
- A loss of power steering assist may require extra steering effort, especially at lower speeds, increasing the risk of a crash.
- Remedy
- Chrysler will notify owners, and dealers will replace the power steering return hoses, steel tubes, and power steering oil cooler, free of charge. The recall began on May 24, 2016. Owners may contact Chrysler customer service at 1‑800‑853‑1403. Chrysler's number for this recall is S08.
Recall number 16V273000 · Recall details
Steering: column
- What is wrong
- Chrysler is recalling certain model year 2011dodge journey, jeep wrangler, chrysler 200, chrysler 200 convertible, dodge avenger, dodge nitro, jeep liberty, dodge caliber, jeep compass, jeep patriot, dodge grand caravan and chrysler town & country vehicles. Some of these vehicles may have been built with a missing or incorrectly installed steering column pivot rivet.
- Risk
- A missing or incorrectly installed rivet could compromise the ability of the steering column to support the occupant loads in the event of a frontal crash, decreasing the effectiveness of the frontal impact safety system. As a result, the condition may increase the potential for injury in a frontal crash.
- Remedy
- Dealers will inspect for rivet presence and alignment and repair the steering column pivot as required, free of charge. The safety recall began on july 4, 2011. Owners may contact chrysler at 1‑800‑853‑1403.
Recall number 11V315000 · Recall details
Steering: electric power assist system
- What is wrong
- Chrysler is recalling certain model year 2010 chrysler sebring, 300, charger (lx) and dodge challenger (lc), avenger (js), and journey (jc), as well as model year 2011 dodge ram light duty pickup (ds) vehicles. Some of these vehicles may experience a separation at the crimped end of the power steering pressure hose assembly.
- Risk
- Leaked power steering fluid onto hot engine components could cause a fire.
- Remedy
- Dealers will inspect and replace as necessary the power steering pressure hoses free of charge. The safety recall began on december 20, 2010. Owners may contact chrysler at 1‑800‑853‑1403.
Recall number 10V475000 · Recall details
Questions about the Dodge Journey power steering loss
Which Dodge Journey years have loss of power steering problems?
The model years with the most reports are 2010 (17 complaints), 2009 (15 complaints) and 2015 (10 complaints).
VIN decoder
See the problems and recalls for an exact car
Buying a used Dodge Journey?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history