2011 Fccc XCM problems

What is wrong

Daimler Trucks North America, LLC (DTNA) is recalling certain model year 2011-2017 Freightliner Custom Chassis Corporation (FCCC) XBR, XCL, XCM, and XCR recreational vehicle chassis, equipped with Cummins ISL engines. The power steering hose on the affected vehicles may be routed incorrectly, and, as a result, the hose may rub against the power stud on the starter motor, possibly causing electrical arcing and a power steering fluid leak.

Risk

Electrical arcing in the presence of leaking power steering fluid can increase the risk of a fire.

Remedy

DTNA will notify owners, and dealers will reroute the power steering hose to provide proper clearance, free of charge. The recall is expected to begin on May 2018. Owners may contact DTNA customer service at 1‑800‑547‑0712 . DTNA's number for this recall is FL-762. Note: This recall is an expansion of 16V‑809.

Recall number 18V163000 · Recall details

What is wrong

Daimler trucks is recalling certain model year 2011- 2012 business class m2 and coronado trucks manufactured from september 1, 2010, through december 31, 2010, equipped with a cummins isx or isl diesel engine. The v-band clamp assembly, part numbers q187684, q187685, and q187686, used to connect the inlet and outlet cone sections to the diesel oxidation catalyst (doc)/diesel particulate filter (dpf) include a t-bolt which can fracture and fail when subjected to stress or load. A fracture or failure of the t-bolt may cause the clamp to loosen and the inlet or outlet sections attached to the doc/dpf housing to disconnect.

Risk

If the inlet or outlet sections disconnect, hot exhaust gases can vent prior to exiting the tailpipe, creating the risk of combustion and a fire. If both clamps fail, there is a risk in some applications that the doc/dpf housing may detach completely, creating a road hazard.

Remedy

Daimler trucks is working with cummins to identify and notify owners of the recall campaign. Repairs will be performed by authorized cummins dealers free of charge. The safety recall began on october 10, 2011. Owners may contact cummins at 1‑812‑377‑5000 or daimler trucks at 1‑800‑547‑0712.

Recall number 11V474000 · Recall details

On April 23, 2018, the National Highway Traffic Safety Administration (“the federal safety agency”) opened Audit Query (AQ18002) to assess the timeliness and scope of four recalls filed by Daimler Trucks North America, LLC (“DTNA”). the federal safety agency subsequently expanded AQ18002 to examine the timeliness and scope of three additional DTNA recalls and compliance with early warning reporting and manufacturer communications reporting requirements. the federal safety agency and DTNA entered into a Consent Order on December 29, 2020, to resolve the federal safety agency’s assertions that certain recalls within the scope of AQ18002 were untimely, DTNA failed to timely submit certain manufacturer communications to the federal safety agency, and DTNA failed to submit field reports to the federal safety agency as required. As part of the Consent Order, DTNA agreed to a total civil penalty of thirty million dollars ($30,000,000), of which ten million dollars ($10,000,000) was paid on January 12, 2021. Also, of that total civil penalty, DTNA agreed to spend five million dollars ($5,000,000) on the specific performance obligations to develop advanced data analytics capabilities to enhance its ability to detect and study emerging safety-related defect trends on its vehicles (“Safety Data Analytics infrastructure”) and an advanced data analytics and reporting platform that integrates data on emerging safety-related defect trends on its vehicles and recall lessons learned (“Safety Communications Platform”). The Consent Order also held fifteen million dollars ($15,000,000) of the civil penalty in abeyance pending DTNA’s satisfactory completion of the requirements of the Consent Order, and its compliance with the Safety Act, and regulations thereunder. the federal safety agency and DTNA agreed to a two-year term for the Consent Order—with an option for the federal safety agency to extend the Consent Order for an additional year, if warranted. In the Consent Order, DTNA agreed to numerous performance obligations, including monthly meetings with the federal safety agency to discuss potential safety issues, recent manufacturer communications, and recall decision-making, among other things; quarterly meetings with the federal safety agency to discuss DTNA’s progress on the performance obligations under the Consent Order, including the Safety Data Analytics infrastructure and Safety Communications Platform, and any issues related to compliance with the Consent Order, Safety Act, or regulations; development of written procedures and employee training materials to help DTNA comply with its legal obligations to timely identify and report safety defects and noncompliances, submit complete and accurate recall filings, and timely submit manufacturer communications and field reports to the federal safety agency; and identifying and reporting previously unreported manufacturer communications and field reports. Also, via the Consent Order, DTNA acknowledged that the failure or inability to identify a specific root cause, develop an adequate remedy or repair, or confirm the affected population of vehicles are not bases for delaying filing a recall with the federal safety agency. On December 22, 2022, the federal safety agency extended the Consent Order for a term of one year due to concerns about DTNA’s compliance with its recall-related obligations. Specifically, the federal safety agency expressed concerns about the completeness of DTNA’s recall reports and issues identified with owner notification letters during the term of the Consent Order, as well as the length of time that DTNA took to consider a straightforward noncompliance issue before filing a recall and DTNA’s interactions with the federal safety agency during the term of the Consent Order. the federal safety agency addressed these concerns with DTNA during the third year of the Consent Order. The extended term of the Consent Order expired on December 28, 2023. Based on the Consent Order, this investigation, AQ18002, is closed. Closure of this AQ has no bearing on the terms of the Consent Order or DTNA’s ongoing legal obligations, and it does not represent a determination by the federal safety agency as to DTNA’s performance under the Consent Order.

AQ18002