2017 Ford Escape: engine stalls while driving

Filed Oct 27, 2026 · Engine · NY

1. The EcoBoost engine block suffered a severe structural failure caused by a factory manufacturing defect known as internal cylinder block coolant intrusion (as documented in Ford TSB 19-2208). Antifreeze leaks directly past the cylinder wall block grooves into the combustion chambers. This vehicle is currently parked and is fully available for physical inspection upon request at the location provided. 2. The engine suffered a sudden, severe mechanical malfunction while driving, causing an immediate drop in cylinder compression, engine misfires, and a dangerous loss of control and motive power. Driving a vehicle prone to sudden stall or failure creates an extreme hazard on public roads, dramatically increasing the risk of a high-speed rear-end collision or stranding the driver in live traffic without propulsion. 3. Yes. The vehicle’s loss of coolant, engine misfire codes, and cylinder block leak characteristics were physically inspected and confirmed by a private, independent auto mechanic. 4. The vehicle has not been inspected by the police or insurance as no crash has occurred yet. Ford Motor Company's customer service and Tier 2 Automotive Consumer Operations (ACO) divisions have been formally notified of the defect, and corporate Case File #CXH-0934-5907 was opened. However, a physical dealership inspection has not been completed due to the manufacturer's refusal to waive upfront diagnostic fees for an out-of-warranty vehicle. 5. Prior to total engine failure, the vehicle displayed an aggressive engine overheat warning indicator on the dashboard. The reservoir was found entirely stripped of coolant, with no visible external fluid leaks underneath the vehicle. These active symptoms and high engine temperature alerts first appeared suddenly on the dashboard on the day of the breakdown.

Filed Jul 2, 2026 · Engine · MN

COMPONENT: Engine / Cooling System DESCRIPTION OF THE PROBLEM: My 2017 Ford Escape (1.5L GTDI EcoBoost engine, 83,891 miles) has been diagnosed by a Ford-authorized dealer (Apple Ford White Bear Lake, RO# 157692) with coolant intrusion into the engine cylinders. The dealer reports white/blue exhaust smoke on cold starts that dissipates after 10-20 seconds, and has recommended full short block replacement at an estimated cost of approximately $10,000. This is the exact condition addressed by Ford's own Customer Satisfaction Program 21N12 (Certain 2017-2019 Model Year Fusion and Escape Vehicles Equipped with a 1.5L GTDI Engine, Short Block Replacement After Coolant Intrusion), issued June 9, 2022. That program acknowledges the 1.5L EcoBoost engine in this vehicle range may exhibit coolant intrusion into cylinder bores, low coolant levels, white exhaust smoke, and rough running, potentially leading to engine damage. When I contacted Ford's Customer Relationship Center, I was told my vehicle is outside the program's 7-year time window and was denied assistance, despite being under the program's 84,000-mile threshold. Coolant intrusion of this kind creates a risk of sudden engine roughness, misfire, and potential stalling, which is a safety concern, not just a mechanical inconvenience, particularly if it occurs at highway speed. I am filing this complaint because this is a known, documented defect that Ford has acknowledged in writing but is declining to remedy on my vehicle due to a time-based technicality, despite mileage well within the program's own stated safe range. VEHICLE: 2017 Ford Escape ENGINE: 1.5L GTDI (EcoBoost) MILEAGE AT FAILURE: 83,891 DEALER: Apple Ford White Bear Lake, White Bear Lake, MN RELATED FORD DOCUMENTATION: Customer Satisfaction Program 21N12 / TSB 22-2134

Filed Jun 18, 2026 · Transmission · MI

After years of driving Escape with issue finally found a mechanic that could definitely diagnose the problem. Was told that it was the torque converter and now possibly the transmission because it had been happening for so long. It shifts gears hard, shakes badly when idling (we always put it into neutral to avoid the shaking), stalls out sometimes when stopped at lights and trying to accelerate, can be coasting at a slow speed and the car will want to accelerate on its own like you were pressing on the gas.

Filed Jun 17, 2026 · Engine · KY

I am reporting a confirmed safety defect in my 2017 Ford Escape involving engine coolant intrusion into the cylinder bores. This is a sudden, random manufacturing defect that occurs without warning. I have exercised full due diligence as an owner regarding upkeep and maintenance on my vehicle. I now have a formal, written diagnosis from a Ford Service Center confirming this internal failure (consistent with TSB 22-2229). This defect creates an extreme safety hazard because it leads to unpredictable engine stalling and sudden engine failure at any time. The verified diagnosis proves my vehicle is currently a high-risk hazard that could lose power without warning on high-speed roadways. Ford’s Customer Satisfaction Program 21N12 is an insufficient response to a defect that causes vehicles to become disabled and vulnerable in traffic. I am requesting that the federal safety agency escalate this to a mandatory safety recall based on the documented, spontaneous nature of this failure despite my proven maintenance history. I purchased the recommended extended warranty and lifetime powertrain warranty recommended by Tri-County Ford where I purchased the vehicle. They are also refusing to fix the issue because it was not caused by an internal part failure. Now I am being forced to either pay $12,000 for a replacement engine or purchase a new vehicle.

Filed Jun 16, 2026 · Engine, Fuel system · 104,600 miles · PA

The contact owns a 2017 Ford Escape. The contact stated that after refueling, the vehicle failed to immediately restart on several occasions. Additionally, the vehicle stalled on several occasions with the Check Engine warning light illuminated. The vehicle was taken to the local dealer who diagnosed that the evaporator canister and purge valve needed to be replaced. The vehicle was not yet repaired. The manufacturer was not yet notified of the failure. The contact was informed about the federal safety agency Campaign Number: 19V515000 (FUEL SYSTEM, GASOLINE); however, the VIN was not included. The contact stated that the vehicle had experienced the failure listed in the recall. The failure mileage was 104,600.

Filed Jun 13, 2026 · Engine · MN

Engine failed at 71,700 miles due to cracked block causing coolant intrusion into cylinders. Motor would quit while driving. Ford dealer tested and confirmed known problem. Motor would misfire then stall.

Filed Jun 5, 2026 · Transmission · RI

The vehicle is operating with a Ford remanufactured transmission assembly which was installed at the dealership of purchase. The repair was completed under the Extended Ford warranty I purchased with the used vehicle 6 months prior and the replacement parts and labor are covered by an active 3-year/36,000-mile Ford Service Parts Warranty from the date of installation with approximately 20,000 miles of coverage remaining at the time of the first incident. On May 5, 2026, at 151,033 miles, the vehicle began exhibiting a severe internal mechanical rattle under brake load, indicating a progressive hardware failure of the internal torque converter assembly. On May 19, 2026, at 151,663 miles, the internal failure escalated, causing the vehicle to suffer a sudden power loss/stalling event while in active traffic, triggering the vehicle's factory 'Stall Alert' dashboard safety warning. The problem has gotten significantly worse, and I can show at minimum, it stalled again on May 27 (video shows car in D but failing to move ), twice on June 4, and again today, after being told there were “no codes”, causing complete loss of propulsion and power steering. This sudden stalling in active traffic creates an immediate highway safety hazard and an extreme risk for a rear-end collision. Because Ford's computer programming automatically clears transient/temporary fault codes upon turning off the ignition, standard diagnostic scanners do not store a permanent code after a key-cycle, hiding an active mechanical safety defect. Authorized Ford repair facilities are refusing immediate diagnostic triage or alternative transportation due to a multi-week service backlog, leaving a safety-compromised vehicle on the road and violating consumer warranty rights."

Filed Jun 4, 2026 · Engine · WI

Coolant was found to be leaking in cylinder number 4. The Ford dealer told us the vehicle needed a new engine with a repair cost of $8,000.00. It is not available for inspection, since it was auctioned off by the Ford dealer. My wife and children were stopped at a stop sign and the engine started to misfire. She was trying to turn onto a busy highway and it lacked power with no acceleration initially. Once on the highway. the engine continued to run rough. On the dash, the "engine fault, service now" light appeared. A diagnostic test was performed at a Ford dealer and was confirmed to be coolant leaking into a cylinder. It was not inspected by anyone else. The engine was making a wierd noise after it was turned off a couple of days before and the coolant in the overflow tank was significantly elevated. After it stalled on my wife, the overflow coolant tank was constantly low and needed to be filled back up after each use. After driving and for 4-5 minutes after the engine was turned off, it sounded like water slooshing around in the engine. When it was taken in for diagnostic testing the "engine" light was flashing and then turned solid and then turned off.

Filed May 12, 2026 · Engine · 145,000 miles · NC

The contact's friend owns a 2017 Ford Escape. The contact stated that the owner had to add additional coolant after it was low. The vehicle stalled while driving, and all the coolant was depleted. The owner used approximately 2 jugs of antifreeze. The driver was stranded. The low coolant light was illuminated. The vehicle was pulled to the owner's residence. The local dealer was contacted, but the vehicle was not diagnosed or repaired. The manufacturer was not notified. The failure mileage was approximately 145,000.

Filed May 7, 2026 · Engine · SC

I own a 2017 Ford Escape SE with approximately 96,665 miles. The vehicle developed coolant intrusion into the engine cylinders, resulting in coolant loss, misfires, rough running, and risk of engine failure. The dealership diagnosed the vehicle as requiring a full engine replacement. Ford has acknowledged similar coolant intrusion defects in certain 2017 Ford Escape vehicles through Customer Satisfaction Program 21N12 and related technical service bulletins, but my VIN was excluded despite experiencing the same failure symptoms. This issue creates a serious safety concern because coolant intrusion can lead to sudden loss of power, stalling, overheating, or complete engine failure while driving. The defect occurred despite regular maintenance and without warning beyond coolant loss and drivability symptoms. In addition, the vehicle experienced transmission failure around the same timeframe, significantly affecting the safety and reliability of the vehicle for family transportation. I believe Ford should investigate and expand coverage for this known engine defect to include similarly affected vehicles outside the current VIN range.

Filed May 3, 2026 · CT

During normal driving, the vehicle unexpectedly powered off and all functions locked up. A warning message appeared stating that the transmission was not in park. After restarting the vehicle, I was able to continue, but the vehicle has been lagging and exhibiting signs that it may stall again

Filed May 2, 2026 · Acceleration, Engine · MN

the federal safety agency Complaint SummaryVehicle: 2017 Ford Escape SEEngine: 1.5L EcoBoostVIN: [XXX] Defect: Engine Block Design Flaw / Coolant IntrusionTechnical Description of the Issue:My vehicle is experiencing a well-documented manufacturing defect specific to the 1.5L EcoBoost engine. The engine block was designed with a "v-groove" between the cylinders that is prone to structural failure. This allows engine coolant to leak into the combustion chambers (coolant intrusion) and allows engine oil to contaminate the cooling system. My vehicle currently exhibits "milky," tan-brown sludge in the coolant reservoir, confirming that oil and coolant are cross-contaminating due to internal engine failure.Extreme Safety Hazards and Dangers:This defect creates several critical safety risks for the driver, passengers, and other motorists:Sudden Loss of Power at High Speeds: The mixing of oil and coolant destroys the engine’s ability to lubricate internal bearings. This can lead to a catastrophic engine seizure while the vehicle is in motion, causing an immediate loss of power and power steering, which creates a high risk of collisions on highways.Engine Fire Risk: When coolant enters the combustion chamber, it can cause severe engine misfires and overheating. Overheated oil or pressurized coolant spraying onto a hot exhaust manifold during a mechanical failure presents a significant fire hazard.Hydro-locking: If coolant floods the cylinder while the vehicle is in operation, the engine can hydro-lock, causing the engine to stall instantly and potentially throwing metal debris onto the roadway, endangering other drivers.Visibility Hazards: Excessive white smoke from the exhaust (caused by burning coolant) can suddenly obscure the driver’s rear-view visibility and the visibility of trailing motorists.Conclusion:Ford Motor Company was aware of this defect, as evidenced by Customer Satisfaction Program 21N08 and TSB 19-2346. However, because these programs have arbitrary expira INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (