The contact owns a 2013 Ford Fusion. The contact stated that the back-over prevention camera image was blank. While reversing, the camera suddenly became inoperable. There was no alert or beeping to warn the driver of an approaching pedestrian when the camera became inoperable. There was no warning light illuminated. The contact stated that the failure was related to the federal safety agency Campaign Number: 25V695000 (Back Over Prevention). The contact called the local dealer and was informed about a diagnostic test. The vehicle was not diagnosed or repaired. The manufacturer was contacted. The failure mileage was approximately 110,000.
2013 Ford Fusion driver assistance problems
43 complaints (2% of all complaints for this car). Typical mileage when it fails: 75,000. 3 crashes reported.
- owner complaints
- 43
- of this car's complaints
- 2%
- typical mileage
- 75,000
- crashes
- 3
- recalls
- 0
Which part fails
- Assist5
- Warnings2
- Automatic emergency braking2
- Rearview system braking1
- Blind spot detection1
- Adaptive cruise control1
At what mileage
Complaints by mileage at the time of the problem.
Ford Fusion driver assistance problems in other years
Specific symptoms reported on the 2013 Ford Fusion driver assistance
Phrases found in the owners' own descriptions, so one complaint can mention several symptoms.
Related recalls
No recalls on record for this model year.
What 2013 Ford Fusion owners say
Most recent owner complaints, unedited.
I was on the highway and a car came in front of me, When I tried to stop the brake was hard and wouldn’t stop! It veered me into the wall and totaled my car. My brakes stiffed up and didn’t stop which cause me to crash.
The rear view camera will display a black screen or the image will be reversed causing confusion and dangerous reversal actions. Also the camera will go black in the middle of parking or not display at all. The transmission will slip without warning and the vehicle will have have to be shut down and restarted in order to drive correctly.
The contact owns a 2013 Ford Fusion. The contact stated that while reversing, the back-over prevention camera displayed a black screen, creating a visibility hazard for the driver. The cause of the failure was not yet been determined. The manufacturer and local dealer were not notified of the failure. The failure mileage was approximately 142,000.
The contact owns a 2013 Ford Fusion. The contact stated that while reversing, the center display failed to display a rear image. No warning lights were illuminated. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. After investigating the failure, the contact related the failure to the federal safety agency Campaign Number: 23V598000 (Back Over Prevention), but the VIN was not included. The manufacturer was notified of the failure and referred the contact to the federal safety agency Hotline for assistance. The failure mileage was 120,000.
The backup camera fails to show an image from behind the car over 75% of the time. The display in the car is black upon putting the car in reverse, within about 2 seconds a message displays “rear view camera is unavailable. Please contact your dealership.” The collision sensors (rear cross traffic) also does not work when the camera is not working. Looking at multiple online sites, as well as a friend who has a similar model Fusion as I do, there are many many reports of this issue . My car is low mileage (63,141). Ford also has multiple recalls for this issue on other models and years, this car should be included in the recalls.
Car suddenly would have power but no start. After replacing what was thought needed replacement, the alternator is when it wouldn't steer anymore. Further inspection concluded it was the electrical rack and pinion, leaving no steering and or assist.
The engine makes a very loud ticking and whirring sound, there are also quite a few electrical components that will not communicate with the PCM causing errors on the vehicle code such as a switch component failure U2002-96 Battery voltage circuit below and above threshold U3003-16 and U3003-17, electric park break enable - Deactivated B1111-53. Lost communication with restraints control module U0151-00 Lost communication with pscm U0131-00 invalid data received from pscm - alive/sequence counter incorrect/not updated and right rear tone wheel - mechanical failures C0039-07 even though there have not been any accidents and all maintenance has been done on proper time frame. The car shifts very hard and sometimes hangs on rpm before a shift causing an even harder gear change. The emergency breaking system does not work at all and there is no warning when you come close to any object wall or person. The reverse parking sensors also came loose and recessed into the back bumper by themselves with no tampering or touching.
The contact owns a 2013 Ford Fusion. The contact stated while shifting to reverse(R), the message “Contact Manufacturer” was displayed on the screen. Additionally, the camera screen went black. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure and referred the contact to file a complaint with the federal safety agency Hotline. The failure mileage was approximately 100,000.
The contact owns a 2013 Ford Fusion. The contact received notification of the federal safety agency Campaign Number: 23V162000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that while coming to a complete stop, the brakes made an abnormal sound. The traction control system warning light was illuminated. Additionally, the contact stated while driving over a bump, a message indicating that Traction Control Unavailable was displayed. The local dealer was not contacted. The vehicle was not diagnosed nor repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was unknown. VIN tool confirms parts not available.
Questions about the 2013 Ford Fusion driver assistance
Does the 2013 Ford Fusion have driver assistance problems?
Owners have filed 43 complaints about the driver assistance of the 2013 Ford Fusion, 2% of all its complaints.
At what mileage do 2013 Ford Fusion driver assistance problems start?
The typical (median) mileage in owner complaints is 75,000 miles.
Was there a recall on the 2013 Ford Fusion driver assistance?
There is no recall for this problem on this model year.
What year does the Ford Fusion have the most driver assistance problems?
The Ford Fusion model years with the most driver assistance complaints are 2016 (183 complaints), 2010 (167 complaints) and 2011 (106 complaints).
Other 2013 Ford Fusion problems
Engine 448Steering 389Transmission 281Body 164Electrical 160Fuel system 142Airbags 101Seat belts 100Locks 85Brakes 73Acceleration 43Wheels 32Lights 30Visibility 29Seats 27Suspension 11Tires 5
VIN decoder
See the problems and recalls for an exact car
Buying a used 2013 Ford Fusion?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history