2013 Ford Fusion problems

What is wrong

Ford Motor Company (Ford) is recalling certain 2015-2018 Focus and 2013-2016 Fusion vehicles previously repaired incorrectly under recall numbers 18V169 and 18V845. The clutch may fracture, resulting in damage to the transmission assembly and possibly a transmission fluid leak.

Risk

A transmission fluid leak in the presence of an ignition source such as hot engine or exhaust components can increase the risk of a fire.

Remedy

Dealers will update the software, free of charge. Additionally, dealers will inspect Focus vehicles and replace the clutch assembly as necessary, free of charge. Owner notification letters were October 16, 2026. Owners may contact Ford customer service at 1‑866‑436‑7332. Ford's number for this recall is 26S43. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on on July 6,2026.

Recall number 26V376000 · Recall details

What is wrong

Ford Motor Company (Ford) is recalling certain 2013-2018 Fusion and Lincoln MKZ vehicles. The front brake hoses may rupture and leak brake fluid.

Risk

A brake fluid leak will increase brake pedal travel and extend the distance needed to stop the vehicle, increasing the risk of a crash.

Remedy

Dealers will replace the front brake hoses, free of charge. Owner notification letters were mailed June 27, 2023. Owners may contact Ford customer service at 1‑866‑436‑7332. Ford's number for this recall is 23S12.

Recall number 23V162000 · Recall details

What is wrong

Ford Motor Company (Ford) is recalling certain 2013-2019 Escape, 2013-2018 C-Max, 2013-2016 Fusion, 2013-2021 Transit Connect, and 2015-2018 Edge vehicles. The bushing that attaches the shifter cable to the transmission may degrade or detach.

Risk

A damaged or missing bushing may prevent the vehicle from shifting into the intended gear, and cause the vehicle to move in an unexpected direction. Additionally, the vehicle may roll after the driver selects the 'Park' position. Either scenario increases the risk of a crash or injury.

Remedy

Dealers will replace the under hood shift bushing and add a protective cap over the shift cable bushing, free of charge. Interim owner notification letters, informing owners of the safety risk, were mailed July 1, 2022. Remedy parts are expected to be available in 4th Quarter 2022. Owner notification letters were mailed October 27, 2022. Owners may contact Ford customer service at 1‑866‑436‑7332. Ford's number for this recall is 22S43.

Recall number 22V413000 · Recall details

What is wrong

Ford Motor Company (Ford) is recalling certain 2011-2014 Fiesta, 2013-2014 Fusion, 2015 Mustang, 2013-2015 Escape and C-Max, 2012-2015 Focus, 2014-2016 Transit Connect, 2013-2014 Lincoln MKZ, and 2015 MKC vehicles. These vehicles were previously recalled and repaired under recalls 15V‑246, 16V‑643 or 17V‑210, however the repair may not have been completed properly. A component within the door latches may break making the doors difficult to latch and/or leading the driver or a passenger to believe a door is securely closed when, in fact, it is not.

Risk

A door that is not securely latched could open while the vehicle is in motion, increasing the risk of injury to a vehicle occupant.

Remedy

Ford will notify owners, and dealers will inspect the latch date codes to confirm if the repair was done correctly, and replace the side door latches if necessary, free of charge. Owners will also have the option to inspect their own vehicle's door latches and enter the date codes into a website to determine if the latches are correct. Owner notification letters were mailed on July 27, 2020. Owners may contact Ford customer service at 1‑866‑436‑7332. Ford's number for this recall is 20S30.

Recall number 20V331000 · Recall details

What is wrong

Ford Motor Company (Ford) is recalling certain 2013-2016 Ford Fusion and Lincoln MKZ, 2015-2016 Ford Edge, and 2016 Lincoln MKX vehicles originally sold, or currently registered in Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, and Wisconsin. Road salt or other contaminants may corrode the electric power steering gear motor attachment bolts.

Risk

If the bolts corrode, the steering gear motor may detach from the gear housing resulting in a loss of power steering assist, requiring a greater steering effort, especially at lower speeds, and increasing the risk of a crash.

Remedy

Ford will notify owners, and dealers will replace the steering gear motor bolts and apply a wax sealer. If any of the steering gear motor attachment bolts are broken or missing, a new steering gear will be installed in the vehicle. These repairs will be performed free of charge. The recall began October 18, 2019. Owners may contact Ford customer service at 1‑866‑436‑7332. Ford's number for this recall is 19S26.

Recall number 19V632000 · Recall details

What is wrong

Ford Motor Company (Ford) is recalling certain 2013-2016 Fusion vehicles equipped with 2.5 liter engines. The bushing that attaches the transmission shifter cable to the transmission may degrade over time and cause the bushing to detach from the transmission. The condition could allow the driver to move the shift lever to Park and remove the ignition key, while the transmission may not be in Park, with no warning message or audible chime.

Risk

If the vehicle is exited without the transmission being in Park and without the parking brake being applied, the vehicle may unexpectedly move, increasing the risk of a crash.

Remedy

Ford will notify owners, and dealers will replace the shifter cable bushing, free of charge. The recall began September 10, 2019. Owners may contact Ford customer service at 1‑866‑436‑7332. Ford's number for this recall is 19S16. Note: Owners are directed to use the parking brake until the recall remedy repairs can be made. This recall is an expansion of 18V471.

Recall number 19V362000 · Recall details

What is wrong

Ford Motor Company (Ford) is recalling certain 2013-2014 Ford Escape, and 2013-2016 Ford Fusion vehicles, equipped with six-speed automatic transmissions. The bushing that attaches the transmission shifter cable to the transmission may degrade over time and cause the bushing to detach from the transmission. The condition could allow the driver to move the shift lever to Park and remove the ignition key, while the transmission may not be in Park, with no warning message or audible chime.

Risk

If the vehicle is exited without the transmission being in Park and without the parking brake being applied, the vehicle may unexpectedly move, increasing the risk of a crash.

Remedy

Ford will notify owners, and dealers will replace the shifter cable bushing, free of charge. The recall began September 20, 2018. Owners may contact Ford customer service at 1‑866‑436‑7332. Ford's number for this recall is 18S20. Note: Owners are directed to use the parking brake until the recall remedy repairs can be made.

Recall number 18V471000 · Recall details

What is wrong

Ford Motor Company (Ford) is recalling certain 2013-2014 Ford Fusion vehicles equipped with a 1.6L GTDI engine and 6-speed manual transmission and 2015-2016 Ford Focus vehicles equipped with a 1.0L GTDI engine and 6-speed manual transmission. Also included are four 2017 Ford Focus vehicles that had clutch replacements with potentially affected parts. The clutch may fracture, resulting in damage to the transmission assembly and possibly a transmission fluid leak.

Risk

A transmission fluid leak in the presence of an ignition source such as hot engine or exhaust components can increase the risk of a fire.

Remedy

Ford will notify owners, and dealers will update the Focus vehicles with software that detects and prevents prolonged clutch slip, and will replace the clutch, as necessary, free of charge. Owners of Fusion vehicles will have their clutch assembly replaced free of charge. The recall began August 3, 2018. Owners may contact Ford customer service at 1‑866‑436‑7332. Ford's number for this recall is 18S07.

Recall number 18V169000 · Recall details

What is wrong

Ford Motor Company (Ford) is recalling certain 2014 Escape, 2014-2015 Fiesta ST, 2013-2014 Fusion and 2013-2015 Transit Connect vehicles equipped with 1.6L GTDI engines. If the vehicle is started and driven with an insufficient level of coolant within the engine cooling system, the engine cylinder head may overheat, crack and leak oil.

Risk

If the cylinder head cracks and leaks oil, the oil may contact a hot engine or exhaust component, increasing the risk of a fire.

Remedy

Ford will notify owners, and dealers will install a coolant level sensor and the supporting hardware and software, free of charge. Interim notices informing owners of the safety risk were mailed April 21, 2017. The recall began on January 5, 2018. Owners may contact Ford customer service at 1‑866‑436‑7332. Ford's number for this recall is 17S09.

Recall number 17V209000 · Recall details

What is wrong

Ford Motor Company (Ford) is recalling certain 2014 Ford Fiesta, 2013-2014 Ford Fusion and 2013-2014 Lincoln MKZ vehicles. A component within the door latches may break making the doors difficult to latch and/or leading the driver or a passenger to believe a door is securely closed when, in fact, it is not.

Risk

A door that is not securely latched could open while the vehicle is in motion, increasing the risk of injury to a vehicle occupant.

Remedy

Ford will notify owners, and dealers will replace all four door latches, free of charge. The recall began May 1, 2017. Owners may contact Ford customer service at 1‑866‑436‑7332. Ford's number for this recall is 15S16.

Recall number 17V210000 · Recall details

What is wrong

Ford Motor Company (Ford) is recalling certain model year 2013-2016 Ford Fusion vehicles manufactured November 2, 2012, to July 31, 2014, and 2013-2015 Lincoln MKZ vehicles manufactured November 14, 2012, to July 31, 2014. In the event of a crash, heat from the deployment of a seat belt pretensioner may cause a front seat belt anchor cable to fail.

Risk

If the driver or front passenger seatbelt cables cannot properly restrain the front seat occupants, they would be at an increased risk of injury.

Remedy

Ford will notify owners, and dealers will apply a protective coating to the seat belt cable, free of charge. The recall began May 16, 2017. Owners may contact Ford customer service at 1‑866‑436‑7332. Ford's number for this recall is 16S42.

Recall number 16V875000 · Recall details

What is wrong

Ford Motor Company (Ford) is recalling certain model year 2013-2015 Ford Fusion and Lincoln MKZ vehicles manufactured February 3, 2012, to March 20, 2015, and 2015 Ford Edge vehicles manufactured February 26, 2015, to February 28, 2015, and originally sold, or currently registered in, Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin and the District of Columbia. In the affected vehicles, snow or water containing road salt or other contaminants may corrode the electric power steering gear motor attachment bolts.

Risk

If the bolts corrode, the steering gear motor may detach from the gear housing resulting in a loss of power steering assist. Loss of power steering assist would require a higher steering effort, especially at lower speeds, which may increase the risk of a crash.

Remedy

Ford will notify owners, and dealers will apply sealer and replace the steering gear motor bolts as required. If one or more of the steering gear motor attachment bolts are broken or missing, a new steering gear will be installed in the vehicle. These repairs will be performed free of charge. The recall began on June 24, 2015. Owners may contact Ford customer service at 1‑866‑436‑7332. Ford's number for this recall is 15S14.

Recall number 15V250000 · Recall details

What is wrong

Ford Motor Company (Ford) notified the agency on April 23, 2015, that they are recalling certain model year 2013-2014 Ford Fusion and Lincoln MKZ vehicles manufactured July 1, 2012, to May 31, 2013, and 2012-2014 Fiesta vehicles manufactured February 1, 2012, to May 31, 2013. On April 30, 2015, Ford expanded the recall to cover an additional 119,567 vehicles, including certain model year 2011 Ford Fiestas manufactured from November 11, 2009, to May 31, 2013 and certain model year 2013 Ford Fusion and Lincoln MKZ vehicles manufactured from February 1, 2012, to June 30, 2012. A component within the door latches may break making the doors difficult to latch and/or leading the driver or a passenger to believe a door is securely closed when, in fact, it is not.

Risk

A door that is not securely latched could open while the vehicle is in motion, increasing the risk of injury to a vehicle occupant.

Remedy

Ford will notify owners, and dealers will replace all four door latches with an improved part, free of charge. Interim notifications were mailed to owners on June 5, 2015. The recall began on December 18, 2015. Owners may contact Ford customer service at 1‑866‑436‑7332. Ford's number for this recall is 15S16.

Recall number 15V246000 · Recall details

What is wrong

Ford Motor Company (Ford) is recalling certain model year 2013-2014 Ford C-Max vehicles manufactured January 19, 2012, to November 21, 2013; Ford Fusion vehicles manufactured February 3, 2012, to August 24, 2013; Ford Escape vehicles manufactured October 5, 2011, to November 1, 2013; and Lincoln MKZ vehicles manufactured April 25, 2012, to September 30, 2013. The coating on portions of the Restraint Control Module (RCM) may crack, and when exposed to humidity, circuits on the printed circuit board may short.

Risk

The short circuits could cause the frontal air bags, side curtain air bags and the seat belt pretensioners to not function as intended when needed, increasing the risk of occupant injury in the event of a crash.

Remedy

Ford will notify owners, and dealers will replace the RCM, free of charge. Parts are not currently available. The recall began on May 26,2015. Owners may contact Ford customer service at 1‑866‑436‑7332. Ford's number for this recall is 14S21.

Recall number 14V597000 · Recall details

What is wrong

Ford Motor Company (Ford) is recalling certain model year 2013-2014 Ford Fusion and Lincoln MKZ vehicles manufactured August 15, 2012, through September 10, 2013, 2013-2014 Ford Escape vehicles manufactured June 5, 2012, through August 12, 2013, and 2013-2014 Ford C-Max vehicles manufactured from July 23, 2012, through May 28, 2013. The driver and passenger seatback assemblies may have been produced with sub-standard weld joints used to attach the seat back recliner mechanism to the seat frame. The affected seat backs may have insufficient strength to meet the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 207, "Seating Systems."

Risk

The back of the subject seats may become loose or lean while driving and potentially increase the risk of injury in certain crashes.

Remedy

Ford will notify owners, and dealers will replace the seatback, free of charge. The recall began on May 30, 2014. Owners may contact Ford at 1‑800‑392‑3673. Ford's number for this recall is 14C03.

Recall number 14V164000 · Recall details

What is wrong

Ford is recalling certain model year 2013 Explorer, Taurus, Flex, Fusion, Police Interceptor Sedan and Police Interceptor Utility vehicles; and certain model year 2013 Lincoln MKS, MKT, and MKZ vehicles. In the affected vehicles, the fuel delivery module may develop a crack, allowing fuel to leak.

Risk

A fuel leak in the presence of an ignition source may result in a fire.

Remedy

Ford will notify owners, and dealers will replace the fuel delivery module, free of charge. The recall began on July 20, 2013. Owners may contact Ford Motor Company Customer Relationship Center at 1‑866‑436‑7332. Ford's recall campaign number is 13S04.

Recall number 13V227000 · Recall details

What is wrong

Ford is recalling certain model year 2013 Fusion vehicles manufactured April 19, 2013, through April 23, 2013. The steering gears may be missing an internal retaining clip. If the clip is missing, components inside the steering gear may become dislodged inside the gear assembly.

Risk

This could result in impaired steering, including the loss of steering control, increasing the risk of a crash.

Remedy

Ford will notify owners, and dealers will replace the steering gear, free of charge. The recall began on June 17, 2013. Ford's recall number is 13S06. Owners may contact the Ford customer relationship center at 1‑866‑436‑7332.

Recall number 13V232000 · Recall details

What is wrong

This is an update to a recently announced recall. Ford is recalling certain model year 2013 Escape vehicles manufactured from October 5, 2011, through November 26, 2012, equipped with 1.6L engines, as well as certain model year 2013 Fusion vehicles manufactured from February 3, 2012, through November 29, 2012, equipped with 1.6L engines. Coolant system leaks may cause the engines to overheat and leak flammable engine fluids.

Risk

If flammable engine fluids come in contact with the vehicle’s hot exhaust system, a vehicle fire could occur.

Remedy

Ford will notify owners, and dealers will inspect the engine for coolant system leaks and reprogram the vehicle’s powertrain control module and instrument cluster with an updated calibration and overheat strategy software. There will be no charge to owners for this service. Owners were recently notified to contact dealers to arrange for alternative transportation as Ford developed a remedy. Owners will be shortly receiving notifications to contact Ford dealers to schedule the free remedy repair. Owners may contact Ford Motor Company Customer Relationship Center at 1‑866‑436‑7332.

Recall number 12V551000 · Recall details

What is wrong

Ford is recalling certain model year 2013 Fusion vehicles, manufactured from February 3, 2012, through October 20, 2012, for failing to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment." The affected vehicles may not have had the low beam headlamp projector coating properly cured during its manufacturing process.

Risk

An improperly cured projector coating will become hazy through operation, over time, reducing the brightness of the low-beam lamp. This may decrease driver visibility and increase the risk of a vehicle crash.

Remedy

Ford will notify owners, and dealers will replace the headlamp assembly. The recall began on December 18, 2012. Owners may contact Ford Motor Company Customer Relationship Center at 1‑866‑436‑7332.

Recall number 12V553000 · Recall details

On August 8, 2022, the Office of Defects Investigation (ODI) opened this investigation based on 50 Vehicle Owner Questionnaires (VOQs) alleging front brake jounce hose ruptures on model year (MY) 2013-2018 Ford Fusion and Lincoln MKZ vehicles. A ruptured front brake hose results in a brake fluid leak. As a result, the driver may experience an increase in pedal travel and a reduction in the rate of deceleration, increasing the risk of a crash. It should be noted that the subject vehicles identified fell outside the scope of the federal safety agency Safety Recall 20V‑469, which addressed front brake hoses rupturing on certain MY 2015-2018 Ford Edge and 2016-2018 Lincoln MKX vehicles. The result causes a brake fluid leak, lengthening the distance needing to stop the vehicle, increasing the risk of a crash.On March 10, 2023, Ford Motor Company (Ford) submitted to the federal safety agency Safety Recall 23V‑162 (Ford Recall 23S12) to address front brake jounce hoses that may rupture. Ford found the rupture occurs from a localized failure of the internal reinforcement braid due to cyclic fatigue through tensile/bending and torsional inputs during suspension and steering articulations. The supplier for the front brake jounce hoses is Hitachi. This recall affects the subject vehicles equipped with non-hybrid engines and the suspect front brake jounce hoses (a total of 1,280,726 vehicles). The recall covers subject vehicles built from February 3, 2012 to July 19, 2017 when the suspect hoses were used in vehicle production. The remedy is for dealerships to replace both front brake jounce hoses with new hoses that have a revised braid material at no cost. The vehicles equipped with hybrid engines are excluded from the recall because the internal hose pressure is much lower due to the regenerative braking provided by the hybrid brake system. No failures of brake hoses on hybrid vehicles have been reported to ODI or Ford.Ford's actions address ODIs concerns at this time. Hybrid vehicles will be monitored for related failures. The agency reserves the right to take further action if warranted by new circumstances.The 103 ODI numbers cited above can be viewed at under the following ID numbers:11511014, 11510867, 11510318, 11509030, 11505993, 11504989, 11504400, 11502147, 11502082, 11501820, 11501283, 11498439, 11498296, 11496842, 11496335, 11494931, 11494851, 11494252, 11493001, 11492084, 11492070, 11491444, 11491274, 11488858, 11488027, 11487627, 11487416, 11487233, 11486150, 11484924, 11484526, 11484080, 11483948, 11483926, 11483739, 11483723, 11482773, 11482690, 11481077, 11480788, 11480294, 11480052, 11479338, 11479334, 11479252, 11479247, 11479187, 11479094, 11479048, 11478985, 11478953, 11478729, 11478216, 11476892, 11476282, 11470558, 11468994, 11467109, 11466294, 11462746, 11461217, 11456065, 11455367, 11444848, 11436419, 11436376, 11430685, 11428329, 11425083, 11421026, 11420738, 11420735, 11420298, 11418197, 11403926, 11397549, 11366991, 11366757, 11361016, 11359968, 11354569, 11352165, 11350344, 11348799, 11343929, 11343205, 11331947, 11329020, 11319596, 11310529, 11292271, 11288455, 11254787, 11253479, 11253244, 11234622, 11230669, 11230050, 11228240, 11221111, 11143630, 11129392 and 11120228.

RQ22004

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

EA21002

In December 2019, the Office of Defects Investigation (ODI) opened this investigation based on 235 Vehicle Owner Questionnaires (VOQs) alleging doors failed to latch when closed, and/or inadvertently opened while driving, on model year (MY) 2012-2014 Ford Fiesta, and 2013-2014 Fusion and Lincoln MKZ. Some VOQs reported the failure occurred after the latch had been remedied under a prior recall which involved fracture of the latch pawl spring tab due to thermally induced cyclic fatigue. Other VOQs alleged a similar failure in vehicles not previously recalled. A latch with a fractured pawl spring tab typically results in a ?door will not close? condition, however in certain somewhat rare circumstances, may result in the door coming open while driving. In response to ODI?s investigation, Ford has announced three field actions, as discussed below.On March 23, 2020, Ford submitted Safety Recall 20V‑177 (Ford 20S15), a regional recall campaign to address door latch failures in vehicles not previously recalled under Safety Recalls 15V‑246, 16V‑643 and 17V‑210. The recall affects vehicles currently or ever registered in certain high ambient temperature states (see 20V‑177 for affected states). As a remedy, Ford will replace all four door latches free of charge.On August 24, 2020, Ford issued a non-safety regional field action (Ford 20R01) to address door latch failures on the same model/MY vehicles not covered under 20V‑177 (i.e., not currently/ever registered in affected states). According to Ford, spring tab failure rates for vehicles covered by this action are about half that of the 20V‑177 vehicles. Under this action, dealers will replace all door latches, free of charge, if either; a) the vehicle exhibits a related latch concern, or b) if the vehicle owner expresses a concern about the latches in their vehicles. Details can be found under the federal safety agency TSB No. 10190990, a copy of which is available in this investigative file available at June 8, 2020, Ford submitted Safety Recall 20V‑331 (Ford 20S30) addressing vehicles previously remedied under the federal safety agency Recalls 15V‑246, 16V‑643 and 17V‑210, where the repair may not have been properly completed, specifically not all of the door latches were replaced, or replaced correctly. This recall involves an inspection of the latches, with the option for a consumer self-inspection; owners could view the date codes on their latches (and confirm child safety locks are present on the rear doors) and then submit the information to Ford?s mobile app or website. A dealership inspection option was also available. Any vehicle found to have unreplaced defective latches requires the replacement of all door latches as directed by Ford.Regarding the 4,494 reports cited above, 1,485 involve scope-related failures (with 13% alleging door opening), and the remaining 3,009 reports involving remedy concerns (with 18% alleging door opening - note ODI was unable to verify the allegations of door opening). The three ODI injuries were all relatively minor. Ford?s reported injury incidences include one (unconfirmed) report of an ejection, three minor injuries with the others involving undisclosed injuries. Ford?s crashes involved two (unconfirmed) crashes alleging the incident door contacted another vehicle and three involving doors striking other property.The recalled vehicles include MY 2011-2015 Ford Fiesta, 2013-2016 Ford Fusion and Lincoln MKZ, 2015 Ford Mustang and Lincoln MKC, 2013-2015 Ford Escape and Ford C-MAX, 2012-2015 Ford Focus and 2014-2016 Ford Transit Connect.Ford's actions address ODI's concerns at this time. ODI will take further action if warranted by new information. The reference (OD

RQ19005

The Office of Defects Investigation (ODI) opened an investigation based on consumer allegations of doors failing to latch and/or inadvertently opening on model year (MY) 2011-2013 Ford Fiesta, MY 2013 Ford Fusion and MY 2013 Lincoln MKZ vehicles. All of the affected vehicles share the same door latch design.ODI has received 281 unique reports related to the alleged problem, with over 100 claiming that the door(s) opened inadvertently while the vehicle was in motion. There were no crashes reported however three separate injuries were indicated, all caused by a rebounding door striking a consumer after they attempted to close it. In response to ODI's Information Request (IR) letter, Ford Motor Company (Ford) responded with 1,102 unique reports related to the alleged problem. There were no injury claims but there were two claims of low speed accidents occurring involving the door opening while driving and damaging property. Ford also submitted 10,883 warranty claims related to door latch failures.Many customers indicated that the door would not latch at all and accordingly they decided to restrain the door by other means (looping the seatbelt through the door, or using rope or tape) in order to drive the vehicle.Some customers also reported multiple door latch failures occurring on the same vehicle on different doors occurring months apart.On April 23rd, 2015 Ford notified ODI that it would conduct a safety recall (15V‑246) to remedy door latches failures on certain MY 2011-2014 Ford Fiesta and MY 2013-2014 Ford Fusion and Lincoln MKZ vehicles.According to Ford, the pawl spring tab located within the door latch can break off, or separate and result in a ?door will not close condition.The recalled vehicles include Fiesta vehiclesmanufactured from the start of the MY 2011 to May 2013 and Fusion and MKZ vehicles manufactured from the start of the MY 2013 year until May 2013.In May 2013 Ford reports that it made a manufacturing quality control change, specific to the spring tab, to improve the performance of the existing part.The door latch spring tab was redesigned and the new latch was phased into production in December 2014 with a new part number.Ford will replace all four door latches on the affected vehicles with the new latch design currently in production.The recall action initiated by the manufacturer appears to address the safety risks of concern to ODI.Accordingly, the investigation is closed.The ODI reports cited above can be reviewed at www-odi.the federal safety agency.dot.gov/owners/Searchreference under the identification (ODI) numbers found in the attached list.

EA15002

On February 21, 2013, the Office of Defects Investigations (ODI) opened Preliminary Evaluation PE13-003 to investigate allegations of electronic throttle body (ETB) failures resulting in sudden reduction of engine power in model year (MY) 2009-2013 Ford Escape, Fusion, Mariner and Milan vehicles. During this investigation, Ford identified a condition in subject vehicles equipped with 2.5L and 3.0L engines that may result in a sudden reduction of engine power.According to Ford, the ETB internal motor contacts may develop a high resistance material buildup condition on the commutator, resulting in intermittent electrical connectivity and reduced engine power. When this condition occurs, the Malfunction Indicator Lamp (MIL) or Wrench light will illuminate and the vehicle may enter a limited limp home mode.Ford?s trade name for the feature is Failure Mode Effects Management (FMEM) mode.In this mode, engine power and vehicle speed are reduced, while full function of the power steering, power braking, lighting, and climate control systems are maintained.ODI?s complaint analysis indicate that the predominant failure mode involved reduced motive power associated with the limited limp home mode with engine speeds limited to approximately 900 RPM. Analysis of warranty claims provided by Ford identified 59,807 claims related to ETB replacements and approximately 50 percent of claims are associated with diagnostic trouble codes (DTC) P2111, Throttle Body Stuck Open, and P2112, Throttle Body Stuck Closed.Ford described several factors where the ETB motor may fail resulting in DTCs P2111 or P2112 but the failure is not an existing stuck open or closed ETB valve position.According to Ford, the ETB control strategy provides the driver with three FMEM modes that allow varying degrees of vehicle mobility depending on the severity of the fault detected.DTCs associated with stuck open or closed throttle valves are designated the highest failure severity resulting in engine speeds limited to high idle corresponding to the limited limp home mode.Vehicles are not likely to unexpectedly stall as a result of this condition, but drivers may characterize the reduced functionality as a stall, even though their vehicle may still has motive capability.Other FMEM limp modes may result in reduced engine performance but will maintain vehicle speed above 20mph. During this investigation, Ford and its suppliers, Delphi and Igarashi, updated the powertrain control module (PCM) software to include a throttle body motor cleaning cycle during key-on and modified the ETB internal motor components design, surface finish and material composition to improve durability. Additionally, Ford developed a remedy procedure and issued a special Customer Satisfaction Program (CSP) 13N03 extending the ETB warranty coverage and instructing dealers to update the powertrain calibration to improve vehicle performance in the event that intermittent electrical connectivity of the throttle body motor contacts occurs. The program extends the coverage for up to 10 years of service or 150,000 miles from the warranty start date of the vehicle, all vehicles are eligible for the program through January 31, 2015 regardless of mileage.Owners of the affected vehicles will be contacted by mail to take their vehicle to a Ford dealer who will reprogram the PCM to the latest calibration. The bulletin was sent to dealers on January 17, 2014 and the owner letter mailing began on January 27, 2014. See the investigative file for copies of Ford's bulletin and owner letter. This preliminary evaluation is closed. The closing of this investigation does not constitute a finding that

PE13003