FCA US sent me a written warranty extension (15 years/150,000 miles) for the instrument panel cluster on my vehicle, covering a blank EVIC display with no digital speedometer, fuel level, temperature, odometer, or PRNDL. My vehicle has this condition intermittently. As I was traveling approximately 55 mph my power steering, antilock brakes, speedometer, fuel gauge, traction control, all-wheel drive, and emergency brake warning lights came on/off. I actually lost power steering and was unable to turn the vehicle off. I reached out to Jeep and advised them of this and that I received the letter for the instrument panel cluster XZ1 and I thought this was related. I read the letter to them word for word, and they had the dealership perform the recall on my clutch. I didn't know until all of the same things happened again and I checked the receipt to confirm the work performed. I reached out to Jeep the same day and that was more than a week ago. I now have a new service transmission light. My vehicle is not safe to drive and they still don't even know why I called. My case number with Jeep is 98166358.
2019 Jeep Wrangler: sudden loss of power
30 of the 749 complaints about the 2019 Jeep Wrangler describe sudden loss of power.
- owner complaints
- 30
- of this car's complaints
- 4%
- typical mileage
- 14,250
- recalls
- 0
Sudden loss of power by model year
What owners say
The 48-Volt Lithium-Ion eTorque Hybrid Battery Pack (Mopar Power Pack Unit/PPU) on my 2019 Jeep Wrangler Sahara Unlimited (~55K miles) failed. The failed component may be available on video by the dealership. Check engine light first appeared early XXX. Earliest dealership appointment was late August 2026. At that visit, dealer diagnosed DTCs P0A94 (recurring, including P0A94-03) and U0412, and performed a software update flashing the BPCM (Battery Pack Control Module) firmware from 05057870AN to 05057870AV per a Technical Service Bulletin. This was covered under warranty at no charge; vehicle was returned to me. Days later, the check engine light returned along with a battery warning light and additional indicators, including ABS among others I could not fully identify. The vehicle then lost power and stopped running while in the roadway, disabled in an active lane of travel — a safety hazard to myself and surrounding traffic. Vehicle was towed to the dealership XXX. On this second visit, the dealership attributed the failure to moisture exposure and corrosion at the PPU connector/harness, denied warranty coverage, and charged me $4,561.90. I received the repaired vehicle XXX. I opened a case with Stellantis Customer Care (Case #XXX) with case manager [XXX] to request a technical review of the failure and the warranty denial. [XXX] stated he contacted the dealership five times seeking information or resolution and received no response. He offered rental car reimbursement up to $50/day during the repair. Dealership diagnosed and repaired the vehicle on both occasions. No known inspection by manufacturer, police, or insurance beyond the review requested under Stellantis case #XXX. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The contact owns a 2019 Jeep Wrangler. The contact stated that while driving at an undisclosed speed, the vehicle stalled. The contact pulled over and waited for several minutes before restarting the vehicle. The vehicle was taken to the dealer, who replaced the wiring harness, but the failure persisted with the speedometer and fuel gauge fluctuating and the instrument panel icons flashing. Additionally, the vehicle was jerking and experienced a loss of power steering assist while driving. The vehicle was jumpstarted. The vehicle was taken back to the dealer; however, the vehicle was not yet diagnosed or repaired. The contact related the failure to the federal safety agency Campaign Number: 24V652000 (Electrical System); however, the VIN was not included in the recall. The manufacturer was not made aware of the failure. The failure mileage was approximately 82,000.
I drove over a rough patch/bump in the road. A ton of warning messages and failure lights activated on the dash. In addition to the check engine light, there were warnings for electronic stability protection, sway bar disconnect, ABS failure, power steering failure, shift lever malfunction. In addition to these malfunctions a failures, the windshield wipers turned on un-commanded and the radiator fan went into the highest possible speed, the digital engine temperature gauge failed, and both the digital and analog speedometers failed. This happened on a arterial road, losing power steering and braking at ~30mph unexpectedly was a shock, but manageable. At highway speeds it likely would have led to an accident or collision. Unfortunately, I don't have any documentation of the failure lights and systems failing, but it had happened several times prior to this occurrence, albeit only with dash warning lights, no actual system failures. After the system failures, I stopped driving the vehicle. The problem appears to be somewhat widespread and is caused by a failing CAN-C BUS. A quick google search will reveal NUMEROUS descriptions on the same dangerous issue. This thread seems to clearly expIain the root of the issue with the CAN-C BUS: [XXX] I replaced my old CAN-C BUS (p/n 68321746AA) with a new part and it appears to have resolved the issue. I have saved the old CAN-C BUS for inspection if the federal safety agency is interested. It looks exactly like the failed BUS in the linked reddit thread above. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The contact owns a 2019 Jeep Wrangler. The contact stated that while driving 70 MPH, the vehicle decelerated unintendedly and failed to exceed 40 MPH. Additionally, the vehicle lost power steering functionality and became difficult to steer. The contact stated that the vehicle later operated as needed; however, the failure recurred several times while driving. Several unknown warning lights were illuminated. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was not notified of the failure. The failure mileage was 111,000.
The contact owns a 2019 Jeep Wrangler. The contact stated that while the vehicle was parked, the contact's husband noticed that the lights on the instrument panel were illuminated. The vehicle was taken to the dealer where it was diagnosed that the interlock brake system had failed and needed to be replaced; however, the part was not available. The contact stated that the failure persisted. The contact stated that on another occasion, while her husband was driving 25-30 MPH, the vehicle lost power steering functionality and the engine seized. The contact stated that the gear shifter failed to function as intended and there were several warning lights illuminated. The contact's husband was unable to pull over to the side of the road. A Police Officer assisted with traffic control. The vehicle was towed to the residence and then towed to the dealer; however, no cause for the failure was found. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was approximately 100,000.
Like everyone elses jeep while driving, all the warning signals, bells, whistles start going off. Lose power steering, lose power, put jeep in park, cannot get it to go back in drive. Soemtimes will not start just look it up on tictok
Driving on interstate 35 south in fifth gear. There was a loud BANG! and then we lost power. Barely made it off a tight overpass and we saw the smoke. The car was quickly on fires we got out as it started to engulf the jeep with flames. It was a total and complete loss - and very dangerous.
So driving about 50-55mph, the dash lights lite up like a christmas tree. Everything from ABS, shifter lock, sway bar, airbags, traction control, aux battery and some other things that i can't remember. Engine lost power, power steering and unable to shift out of park. I took to my local dealer, I didn't buy it from them, and they diagnsoed the issue of a faulty ABS module. This module has been in the stage of "engineering" for over a year. I spent $900 on one ABS module that was available out of 5 in the US from another dealer and to get 20 minutes down the road only to have it happen again. The vehicle was at the dealer for 5 weeks. The new part was to become available on May20th. Two days ago the service manager called to tell me that they pushed the date to Aug 20th. This will be almost 2 years in this process with this part. The manager then proceeded to tell me it will probably be longer as Jeep went to a new vendor and it is redoing the part. I know of hundreds of other owners in the same boat. Jeep star techs say they can't diagnose past this part so I am paying on a big paper weight since November 23. I have started a case with Jeep customer care only for them to say they can't do anything financially or anything other than help expedite the issue. This is a lost cause as it is still being developed 2 years later. My GM of the dealership said he has 4-5 others at his lot in the same boat and a number of other owners with vehicles like myself at the house. I feel the need for someone to put pressure on the vendor to help with getting a recall on this situation.
Loss of power on the highway, check engine light, battery light, PCM light, Service start/stop system light, stalling and shutting off when put into reverse. Code for MGU. It’s an etourqe Jeep Wrangler, no alternator and no aux battery. It’s been at a dealership since March 6th. They’ve replaced the MGU twice, which is a $15,000 part. They’ve replaced belts, belt tensioners, a crank shaft sensor and opened a star case and cannot remedy the issue. It still stalls and dies when put into reverse. Losing power and being unable to accelerate on the highway is exceedingly dangerous. The vehicle stalling and dying in any scenario is exceedingly dangerous. Not only to myself and the people in my vehicle but to others around me. The issue has been reproduced multiple times at the dealership and they cannot correct the problem.
While accelerating, vehicle refused to shift into second gear and losing power while attempting to accelerate onto the interstate. With the pedal all the way down, the vehicle was going 5mph. No warning lights, sounds or messages were provided. This could have been fatal as it occurred at a merge point on a 70mph interstate. Upon dealership review, the high pressure fuel pump has malfunctioned requiring replacement under 50,000 miles.
While driving, traction control light came on. Eventually went away after shutting off vehicle, but engine light came on. Things escalated a week later when all warning lights starting coming on while I was driving and I lost power steering. I took to the dealership and they said several wires had rubbed against a condenser. The fixed the wires. Approx. 2 weeks go by with no problems. Then my Jeep was idling in a parking lot and all the lights start coming on and what I assume was the engine fan started running. It sounded like the Jeep was going to blow up the way the fan was running. I shut the Jeep off and when turned back on, the engine light was on and was able to drive it home. Took it to the dealership and as sitting in the parking lot, it again had all the warning lights going off and the fan went crazy again. It has now been at the dealership for two weeks. No answers. I’ve done research on line and there are lots of people experiencing the same problem. Needs a recall! This is absolutely dangerous to be occurring when driving.
Service bulletins that may apply
- Warranty Bulletin D-23-04 Rev. F 2018
- Warranty Bulletin D-23--04 2018
- Turbocharger Kit Please note that many turbo components are serviceable separately and full turbo...
- Core – heater
- Throttle body – none
- Bolt - hex flange head
- Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp...
- Water Pump & Chain Case Cover
Related recalls
No recalls on record for this model year.
Questions about the 2019 Jeep Wrangler loss of power
Is sudden loss of power a common problem on the 2019 Jeep Wrangler?
30 of 749 owner complaints about the 2019 Jeep Wrangler (4%) mention sudden loss of power. The model year with the most reports is 2024.
Is there a recall or service bulletin for this on the 2019 Jeep Wrangler?
There are 0 recalls and 87 service bulletins for the same area of the car. Check them below with your VIN.
Other symptoms on the 2019 Jeep Wrangler
Pulling 111Power steering loss 44Check engine light 36ABS 34Wipers 24Warning lights 23Fuel gauge 16Jerking 15Stalling 14Steering lock-up 14Won't shift 14Fire or smoke 12Won't start 10Engine failure 9Overheating 9Ball joint 8Screen failure 8Backup camera 6Start-stop 6Shudder 5Slipping 5
VIN decoder
See the problems and recalls for an exact car
Buying a used 2019 Jeep Wrangler?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history