Transmission slipping while changing gears. Engine shutting down while driving. Was put in the shop 5/28, they said they fixed it. did it again on the way home on 6/21/24.
2018 Chrysler Pacifica: transmission slipping
5 of the 900 complaints about the 2018 Chrysler Pacifica describe transmission slipping.
- owner complaints
- 5
- of this car's complaints
- 1%
- recalls
- 2
Is there a fix? There are 2 recalls and 33 service bulletins for this area of the car. See below
Transmission slipping by model year
- 20241
- 20221
- 20211
- 20192
- 20185
- 201735
- 20081
- 20071
- 20062
- 20054
- 20042
What owners say
Van has been clunking/slipping through transmission when accelerating. Stop/Start function error relayed and had a rough idle noticeable when started cold. Car would shut down on occasion when coming to a stop. Battery was recently replaced, assuming due to start/stop battery(also been replaced) draining main battery. Technician indicated Misfire on cylinder, coil swapped, spark plugs replaced and 100,000 mileage maintenance completed per recommendation due to scope of work. Van returned then upon first start, extremely rough idle and exhaust smelled the worst I've ever smelled, choking even. Van taken under warranty at least 2 times for transmission and abrupt shutdowns due to safety concerns with vehicle. Never replicated at dealership.
Since the car was bought new back in june 2018 , the transmission when shift from p to d , it would engage for a second and when you hit the accelerator it wound slip for about 2 seconds and then it engages back with a bang . I found this to be very dangerous especially when I'm pulling out of the street or parking lot . I've tried to resolve it at the dealership a few times but it was hard to duplicate and instead the dealer just updated the software which did nothing to resolve the slipping problem .
When I am accelerating, the vehicle is slipping 30-40 MPH, almost like a violent jolt. (at times seems like someone is rear ending us) I have brought it 2 dealerships, 1 said it couldn't duplicate the issue, the other dealership said it's a normal feature of the car. This makes me extremely concerned for the safety of my family. This has happened numerous time (like every day) I have brought the vehicle in twice now, last on 8/16
The transmission has slipped and/or jerked on multiple occasions. As many as 50. When driving from a stop it will not go into gear for several seconds or will jerk into gear. While putting in park it will jerk causing it to jump forward which could lead to an accident.
Service bulletins that may apply
- 948TE Transmission Reaction Shaft Service Bushing Kit Customers may experience a Malfunction Indicator...
- International Warranty Bulletin ID-24-01 (XN1) eFlite Si-eVT Transmission Certain 2017
- Internal Transmission Wiring Connector Short Warranty Extension XN1 Customers may experience a Malfunction...
- Verifying Camshaft Diagnosis
- Internal Transmission Wiring Connector Short Warranty Extension XE1 Customers may experience a Malfunction...
- Warranty Bulletin D-23-07 (XE1) Eflite Si-eVT Transmission
- CEL (Check Engine Lamp) Illuminates, Recent PCM Replace or Flash Update Performed, Diagnostic Trouble...
- Outside Power Fold Rearview Mirror Noise Or Loose At Pivot
Related recalls
Power train: automatic transmission
- What is wrong
- Chrysler (FCA US LLC) is recalling certain 2019 Jeep Cherokee vehicles and 2018 Chrysler Pacifica non-hybrid vehicles. A component in the transmission may not have been welded properly, possibly causing the transmission to not transmit engine power to the wheels.
- Risk
- If the transmission weld fails, the vehicle will stop moving, increasing the risk of a crash.
- Remedy
- Chrysler will notify owners, and dealers will replace the transmission, free of charge. The recall is expected to begin September 2018. Owners may contact Chrysler customer service at 1‑800‑853‑1403. Chrysler's number for this recall is U85.
Recall number 18V492000 · Recall details
Power train: axle assembly: axle shaft
- What is wrong
- Chrysler (FCA US LLC) is recalling certain 2018 Chrysler Pacifica vehicles. The front axle halfshafts may have been incorrectly assembled, preventing the shaft from being properly secured to the constant-velocity (CV) joint.
- Risk
- If the axle shaft disengages from the CV joint, the vehicle will have a loss of drive or allow the vehicle to move while in the "Park" position. Either condition may increase the risk of a crash.
- Remedy
- Chrysler will notify owners, and dealers will replace the left or right halfshaft assembly, free of charge. The recall began September 18, 2018. Owners may contact Chrysler customer service at 1‑800‑853‑1403. Chrysler's number for this recall is U80.
Recall number 18V493000 · Recall details
Questions about the 2018 Chrysler Pacifica slipping
Is transmission slipping a common problem on the 2018 Chrysler Pacifica?
5 of 900 owner complaints about the 2018 Chrysler Pacifica (1%) mention transmission slipping. The model year with the most reports is 2017.
Is there a recall or service bulletin for this on the 2018 Chrysler Pacifica?
There are 2 recalls and 33 service bulletins for the same area of the car. Check them below with your VIN.
Other symptoms on the 2018 Chrysler Pacifica
Check engine light 146Stalling 133Misfire 84Loss of power 65Start-stop 65Overheating 62Engine failure 52Jerking 44Power steering loss 42Won't start 42Fire or smoke 24Harsh shifting 21Steering lock-up 17Backup camera 15Screen failure 15Adaptive cruise 14Won't shift 14Transmission failure 14Ball joint 12Hesitation 12Key fob 12Grinding brakes 11Warning lights 11Knocking 10Collision warning 9ABS 8Door locks 8Shudder 8Battery drain 7Fuel pump 6Pulling 6Sudden acceleration 6Steering noise 5
VIN decoder
See the problems and recalls for an exact car
Buying a used 2018 Chrysler Pacifica?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history