While driving, the vehicle experiences a sudden and intermittent "catching" or sticking sensation in the steering wheel. This issue happens exclusively when initiating a slight turn to the left, specifically around the 11 o'clock steering wheel position. There is no noise (no clunking, clicking, or grinding) associated with the failure. When the steering wheel "catches," it requires additional physical force to pull the wheel past the sticking point. Once it breaks free, the electric power steering suddenly engages with a sharp jolt, which causes the vehicle to momentarily jerk or oversteer.
2018 Chrysler Pacifica: clunking or noise when steering
5 of the 900 complaints about the 2018 Chrysler Pacifica describe clunking or noise when steering.
- owner complaints
- 5
- of this car's complaints
- 1%
- recalls
- 0
Is there a fix? 4 service bulletins cover this area of the car. See below
Clunking or noise when steering by model year
What owners say
Makes a clicking popping noise when turning the wheel. The sound is highly noticeable when stationary or moving very slowly, and occurs specifically when the steering wheel is forced almost all the way to the bump stop either way. Dealership quoted over $4000 for electric rack and pinion. I had just paid $17000 for it without an extended warranty.
When turning slightly right or left, the lower steering column makes a clicking sound while staying stuck and you have to forcefully move the steering wheel in the opposite direction to get the steering unstuck. A safety hazard of possible over correction could send someone into oncoming traffic.
The steering occasionally makes noises and sticks while turning. I feel that if this happens at the wrong time it could potentially cause an accident.
Having trouble with steering. At times steering wheel makes noises and locks up while turning. I was told a recall was already done and that I need a new computer that will cost 5k for part and install. I just had issues with panel lights going on and off and had to replace secondary battery due to stop/start button which Ive had trouble with consistently. I think this issue with computer may be due to recall issue and I believe this issue should be fixed and paid for thru recall process. It is an ongoing issue with pacifica 2018 with start/stop and push button starts. I have taken it to 2 dealers. They said recall done. So I need new part
Service bulletins that may apply
Related recalls
No recalls on record for this model year.
Questions about the 2018 Chrysler Pacifica steering noise
Is clunking or noise when steering a common problem on the 2018 Chrysler Pacifica?
5 of 900 owner complaints about the 2018 Chrysler Pacifica (1%) mention clunking or noise when steering. The model year with the most reports is 2004.
Is there a recall or service bulletin for this on the 2018 Chrysler Pacifica?
There are 0 recalls and 4 service bulletins for the same area of the car. Check them below with your VIN.
Other symptoms on the 2018 Chrysler Pacifica
Check engine light 146Stalling 133Misfire 84Loss of power 65Start-stop 65Overheating 62Engine failure 52Jerking 44Power steering loss 42Won't start 42Fire or smoke 24Harsh shifting 21Steering lock-up 17Backup camera 15Screen failure 15Adaptive cruise 14Won't shift 14Transmission failure 14Ball joint 12Hesitation 12Key fob 12Grinding brakes 11Warning lights 11Knocking 10Collision warning 9ABS 8Door locks 8Shudder 8Battery drain 7Fuel pump 6Pulling 6Sudden acceleration 6Slipping 5
VIN decoder
See the problems and recalls for an exact car
Buying a used 2018 Chrysler Pacifica?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history