2018 Chrysler Pacifica: pulls to one side

Filed Sep 1, 2026 · Steering · NJ

While driving my 2018 Chrysler Pacifica FWD with approximately 86,000 miles, I have noticed abnormal steering behavior when going around gradual curves. The steering does not feel smooth and natural through the turn, and I feel like I have to pull/force the steering wheel to continue through the curve. The steering can feel like it is sticking or resisting rather than smoothly following the turn. This is concerning because it affects the vehicle’s steering response while driving. I brought the vehicle to a mechanic, who inspected it and diagnosed a problem with the steering rack assembly. I was quoted approximately $3,400 to replace the steering rack assembly. I am reporting this because I understand the federal safety agency is investigating steering problems involving 2017–2018 Chrysler Pacifica vehicles, including reports of steering sticking during gradual turns. The steering wheel does not simply pull to one side; rather, it feels as though the steering itself is resisting or sticking while I am making the turn.

Filed Aug 22, 2026 · Steering · NJ

When driving at higher speeds, around 50 mph +, the steering wheel gets stuck into position. You have to over correct it out of the stuck position to stay in the lane. When in a turn, it get stuck around 1 or 11 o'clock and you have to pull hard to the left or right to get it out of the stuck position, which makes you drift into the wrong lane in the stuck position, then swerve towards the wrong lane to fix it. It seems to be getting worse over time. When driving at low speeds, 5mp +, when in a turn, the whole steering wheel column shudders when going back to the straight position. It happens when turning into driveways and parking lots, and can be very startling. The vehicle has been taken to Chrysler service centers multiple times but they always say they can't recreate the problems.

Filed May 28, 2026 · Electrical · 166,303 miles · OH

The contact owns a 2018 Chrysler Pacifica. While driving at an undisclosed speed on the highway, the vehicle suddenly veered to the left on its own. The contact continued driving for a short distance before the vehicle pulled hard to the left a second time. The contact pulled over safely and contacted law enforcement, and the vehicle was subsequently escorted off the highway. The contact then observed multiple warning indicators illuminated on the instrument cluster panel, including the power steering warning light, but could not recall the remaining indicators. The contact referenced the federal safety agency Campaign Number: 19V348000 (Electrical System) to be the cause of the incident however, the VIN was not included in the recall. The vehicle was towed to a independent where it was diagnosed to have a loss of communication Mod A. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 166,303.

Filed Apr 5, 2024 · Electrical, Steering · PA

There is a loud clicking and popping noise from the front drivers side suspension when turning or going over bumpy ground. The car also pulls to one side unexpectedly when going around corners Sometimes while driving the car will shut down and restart as if rebooting a computer.

Filed Nov 1, 2019 · Steering, Suspension · 11,000 miles · NC · crash

I was driving in my 2018 chrysler pacifica on a rural street when it suddenly felt like the front passanger side tire had blown out. The car was difficult to control & and pulled to the right, pushing up against the curb. The car started to smoke and would not turn off. Concerned it was going to go on fire, my daughter & I ran out. When we were out of the car I saw that the front axle connecting the tire had come completely disconnected and dropped to the street while driving. I called 911 for help. The firemen arrived first. The car was still revving & smoking but they were unable to shut it manually so they had to lift the hood & cut the wires. The police arrived & investigated the area. They showed me the gauge mark from where the tire axle dropped in the middle of street which was behind where the car stopped against the curb. There were zero interferences in the area (pothole, debris, signs, railguards etc.). It was a smooth street with a low, gradual curb. The officer told me that it was not my fault & due to a mechanical failure on the car. He wrote that in his report as well as on the notepad paper with his info & phone # to give the the dealership. 2 2018 recalls that may explain the problem, even though my VIN is not affected - which I would like further inspected, so I'm contacting the federal safety agency to hopefully expand the recall VIN #s. *2018 chrysler pacifica recall, the front-axle half-shafts may have been incorrectly assembled, preventing the shaft from being properly secured to the constant-velocity joint. If the axle shaft disengages from the cv joint, the minivan will have a loss of drive or allow the vehicle to move. *chrysler is recalling 47,771 of the 2018 pacifica and pacifica hybrid minivans because parts that connect key suspension and steering components on the right front wheel may fail, which could lead to a crash. *dt*jb*dt

Filed Sep 15, 2018 · Steering · 218 miles · TN

2018 pacifica has 218 miles on it. Bought it 4 days ago. While driving down the road the power steering completely fails. When this happens van pulls hard to the right. This has happened 3 times. Power steering service light, check engine light are both on. Turning van off and restarting fixes the problem, for awhile. Called dealership and was told " that doesn't make sense". Taking it in first thing monday morning.