The contact owns a 2016 Ford Flex. The contact received notifications of the federal safety agency Campaign Numbers: 25V695000 (Back Over Prevention) and 25V829000 (Structure); however, parts to do the recall repairs were unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while in reverse(R), the rearview camera displayed a blank or distorted image. The contact made several attempts to notify the dealer but was unsuccessful. The vehicle was not repaired. The failure mileage was unknown.
2016 Ford Flex: backup camera failure
28 of the 104 complaints about the 2016 Ford Flex describe backup camera failure.
- owner complaints
- 28
- of this car's complaints
- 27%
- typical mileage
- 80,000
- recalls
- 0
Backup camera failure by model year
What owners say
The contact owns a 2016 Ford Flex. The contact received notification of the federal safety agency Campaign Number: 25V695000 (Back Over Prevention); however, the part to perform the recall repair was not yet available. The contact stated that while in Reverse (R), the rearview camera displayed an inverted image. The dealer was not notified of the failure. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not notified of the failure. The failure mileage was approximately 80,000.
There is a current recall on the backup camera that has been pending since 2025. Parts are still not available as of today even though Ford stated parts and instructions were going to be available before end of 2nd quarter, June 30, 2026. Camera has not worked since mid 2025, Ford has been aware since end of 2025.
The contact owns a 2016 Ford Flex. The contact received notification of the federal safety agency Campaign Number: 25V695000 (Back Over Prevention). The rearview camera became intermittently inoperative. The contact stated that the intermittent failure made it difficult to safely reverse the vehicle while the rearview camera was inoperable. While reversing in a parking lot, the rearview camera became inoperative. There were no warning lights illuminated. The vehicle was taken to a local dealer, but the vehicle was not diagnosed or repaired. The manufacturer had not been notified of the failure. The failure mileage was approximately 130,000.
Rear camera has been bad for six months - hazard to drive. Camera not available, is the prompt that comes up. My brother in law took his 2015 Ford F350 in for inspection and his camera was replace this was months ago.
The contact owns a 2016 Ford Flex. The contact received notification of the federal safety agency Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that the rearview camera displayed a distorted image while reversing, and the failure was more significant at nighttime. The dealer was not contacted. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was approximately 50,000.
The contact owns a 2016 Ford Flex. The contact received notification of the federal safety agency Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while reversing, the rearview camera image failed to display. The dealer was made aware of the failure but confirmed that parts were not yet available. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 69,000.
The failed/malfunctioning components involve the rear backup camera system and related electronic driver assistance/safety systems in this 2016 Ford Flex, including the blind spot warning system and parking collision warning features. The condition is intermittent but ongoing and the vehicle is available for inspection upon request. The backup camera intermittently goes blank, freezes, displays improperly, or becomes unavailable while the vehicle is in reverse. At times, the blind spot warning system and parking collision warning features also intermittently fail or become unavailable. These failures create a significant safety risk by impairing rear visibility and reducing driver awareness of nearby vehicles, objects, or pedestrians during backing and parking maneuvers. The problem has been occurring for more than one year. The issue has been reproduced and confirmed by the dealership, which has stated that the vehicle is subject to an open safety recall. However, the dealership reports that parts and/or the final repair remedy are still unavailable, and no repair has been completed despite repeated attempts to obtain recall service. The vehicle has been inspected by the dealership/manufacturer representative in connection with the recall condition. No police or insurance inspection was involved because no crash has yet occurred. Prior to and during the failures, warning messages and symptoms intermittently appear, including loss of the camera display and temporary unavailability of driver assistance features. The failures may occur without warning and have been recurring for over one year. The unresolved condition affects the safe operation, usability, and value of the vehicle. Backup cameras and related driver assistance systems are important federally regulated safety features, and the manufacturer has not remedied this safety recall within a reasonable period of time.
The contact owns a 2016 Ford Flex. The contact stated that while attempting to reverse, the rearview camera became inoperable. The contact stated that the rearview camera image failed to function properly, and the display would appear blue at times. The contact also stated that a “Camera Not Available” warning message would appear intermittently, and on other occasions the image would appear upside down The contact received notification of the federal safety agency Campaign Number: 25V695000 (Back Over Prevention); however, the part required for the recall repair was not yet available. The dealer was contacted. The vehicle was not diagnosed or repaired. The dealer confirmed that the remedy parts were not yet available. The manufacturer was made aware of the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The approximate failure mileage was 183,000.
The contact owns a 2016 Ford Flex. The contact stated that while attempting to reverse, the rearview camera became inoperable. The contact stated that the rearview camera image intermittently faded out and occasionally was blank. The contact received notification of the federal safety agency Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The dealer was contacted; however, the vehicle was not diagnosed or repaired. The dealer confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The approximate failure mileage was 140,000.
The contact owns a 2016 Ford Flex. The contact received notification of the federal safety agency Campaign Number: 25V695000 (BACK OVER PREVENTION); however, the part to do the recall repair was not yet available. The contact stated that the rearview camera displayed a distorted image while the vehicle was in reverse(R), and the screen glitched. The contact stated that the failure obstructed the driver's visibility, which prevented the driver from safely operating the vehicle. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was unknown.
Rear Backup Camera malfunction. Screen goes black or upside down.
Service bulletins that may apply
- This article supersedes TSB 24-2165 to update the TSB Service Procedure
- Illuminated MIL with diagnostic trouble codes (DTCs) P0011, P0012, P0014, P0015, P0016, P0017, P0018,...
- Illuminated MIL with diagnostic trouble codes (DTC) P0011, P0012, P0014, P0015, P0016, P0017, P0018,...
- Blank screen or other various SYNC symptoms only when the vehicle is in transport mode
- Some 2016 MKS, 2016-2017 Navigator, 2016-2018 F-150/Focus/C-MAX/Edge/Fiesta/MKX/Transit Connect/Mustang,...
- Some 2016 MKS, 2016-2017 Navigator, 2016-2018 F150/Focus/CMAX/Edge/Fiesta/MKX/ Transit Connect/Mustang,...
- Ssm 48619
- Map displayed on the left half of the SYNC screen with no other information/soft buttons present after...
Related recalls
No recalls on record for this model year.
Questions about the 2016 Ford Flex backup camera
Is backup camera failure a common problem on the 2016 Ford Flex?
28 of 104 owner complaints about the 2016 Ford Flex (27%) mention backup camera failure. The model year with the most reports is 2019.
Is there a recall or service bulletin for this on the 2016 Ford Flex?
There are 0 recalls and 25 service bulletins for the same area of the car. Check them below with your VIN.
Other symptoms on the 2016 Ford Flex
VIN decoder
See the problems and recalls for an exact car
Buying a used 2016 Ford Flex?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history