When coming to a stop the brake pedal went straight to the floor. No warnings were lamps were present. A mechanic checked the brake lines, master cylinder, and calipers and was not able to reproduce the issue. The mechanic deduced that the likely culprit was a faulty ABS control module. Had I been on the interstate or even had another vehicle infront of me, this would have been absolutely disastrous. This seems related to the recall for the older model fusions. This needs to be looked at.
2012 Ford Fusion: ABS light or ABS activating
47 of the 2,519 complaints about the 2012 Ford Fusion describe ABS light or ABS activating.
- owner complaints
- 47
- of this car's complaints
- 2%
- typical repair cost reported
- $2,749
- typical mileage
- 82,413
- recalls
- 0
Is there a fix? 2 service bulletins cover this area of the car. See below
ABS light or ABS activating by model year
What owners say
The abs control module failed at 59,000 miles. It's difficult driving on wet rainy roads with no ABS System, it's a Hughe safety risk especially on wet roads. The month of August was really rainy and it was extremely stressful driving. I have been looking for a repair but several auto repair shops including FORD can't get the part.
I noticed a couple of months ago my brakes where acting weird one minute they were fine and then sometimes the pedal would go to the floor and one day I was behind someone who had stopped suddenly and I hit my brakes fast and they went to the floor, for me not to hit the person in front of me I had to run off the road I was doing 30 mph and nobody was hurt but if I didn't have the options to run off the side of the road I would have rear-ended the other car and would have put me and the other people in a dangerous situation now my brakes go to the floor all the time I had it checked and every time I hit the brakes while in park they hear air coming from the ABS module which needs to be replaced is what I was told there was never no warning light that came on and never have come on before, this incident would have been much more dangerous if I was on interstate doing 70 + and I could have not stopped I've learned that the same problem has a recall on the 2006 - 2010 Ford fusion and all the reviews I've read the same problem is happening for the 2012 Ford fusion also so why hasn't it been put on the recall list because this puts people's life's in danger and it is a very hazardous safety issue
Ive had multiple accidents trying to get this car repaired . There are recalls all the way up to 2010 yet 2011 are also having the same hydraulic issues and ABS issues .This is outrageous i have to spent over 3000 dollars and the issues still is resolved especially when im paying for manufacturers error.I am not hard on any of my cars but this one is HORRIBLE
While my Student Driver 15 year old son was practicing for his driving test, the Brakes went out. The dash was lit up like a Christmas Tree, and when the Brake pedal was depressed, it touched the floor. The car did slow down briefly, then there was no friction what so ever from the brakes. My son, and wife could have ended up in a horrible accident, as the only way to stop the car was by allowing the car to roll to a complete stop. This is actually a know issue for Ford Fusions from 2006-2010. I brought this car to a dealership, and they diagnosed it as the ABS ABS Hydraulic Control Unit. They have already completed the repairs. One of the comments that was made is that if it had been a 2006-2010, it would have been replaced under recall. After the Brakes went out the Service Advance Trac light, and Check Brake system shown on my Dash Light. This is a very dangerous issues especially since I live in a heavily populated college town. My family, and/or another innocent bystander could have been extremely injured or even killed. I feel like Ford knows about this problem, and should be responsible to replace it.
Their is a recall for Ford Abs Module yet their needs to be one for 2012 Ford Fusions Se as well I have paid over 3200 dollars for my brakes alone . I have had 2 near misses and was in an unreported incident today from power loss on my breaks . Very unsafe for me and those around
Brakes failed while driving. Finally stopped after multiple attempts after pressing brakes to the floor. ABS, advancetrac, and ABS lights came up on dash while this was occurring (not prior). Dealer reproduced /confirmed concern. ABS module fix of $2750. Luckily I was driving slowly and no other cars, people, or animals were in the vicinity; otherwise, this could have resulted in injury/deaths.
Brake system failed while driving. Brake pedal went to the floor and lost all brake assistance. After diagnostics, it was determined to be the ABS control module and hydraulic module. This same model was subject to a recall that ended in 2010 MY however the same issues are persisting into the 2012 MY.
Brake pedal intermittantly sinks to floor; vehicle will stop but braking distance is substantially increased. No brake warning light comes on. Vehicle brought to dealer in November 2022 but dealer could not reproduce issue. Problem re-occured in January 2023; vehicle was towed to dealer. Again, dealer could not reproduce issue because it is very intermittant. At my insistance, and as a customer-pay repair, dealer replaced ABS HCU (hydraulic control unit) and ABS electronic control module. Note that there is a recall on older Fusion models for HCU failure but not 2012 model.
Reporting this issue after the fact as it closely resembles the events associated with earlier Ford Fusions documented under the federal safety agency Safety Campaign Number: 19V904000. After ABS was activated, the brake pedal felt extremely soft and the required braking distance greatly increased. This was initially fixed by replacing the master cylinder and flushing the braking system; however, that fix proved to be temporary. Soft brakes and large braking distance is now an intermittent issue. This car is available for inspection if needed.
Was backing up and the Power steering Assist Fault came on i was unable to drive car as the steering wheel is locked. The ABS system kicks in and had the brakes done.
Slippery/snowy conditions, applied brakes approaching a stop sign. ABS kicked in and brake pedal dropped to the floor. With reduced braking ability. This has continued since. This has happened the past 2 winters and will eventually just release and the brakes function normally, until the ABS is needed and then the same thing happens.
Service bulletins that may apply
Related recalls
No recalls on record for this model year.
Questions about the 2012 Ford Fusion abs
Is ABS light or ABS activating a common problem on the 2012 Ford Fusion?
47 of 2,519 owner complaints about the 2012 Ford Fusion (2%) mention ABS light or ABS activating. The model year with the most reports is 2010.
How much does it cost to fix ABS light or ABS activating on the 2012 Ford Fusion?
Owners who mentioned a price put the repair at about $2,749 (median of 5 complaints that include a dollar amount). Costs vary with mileage, warranty and where the work is done.
Is there a recall or service bulletin for this on the 2012 Ford Fusion?
There are 0 recalls and 2 service bulletins for the same area of the car. Check them below with your VIN.
Other symptoms on the 2012 Ford Fusion
Power steering loss 779Loss of power 232Steering lock-up 157Door locks 122Engine failure 112Stalling 77Jerking 57Check engine light 50Ball joint 32Airbag light 30Brake failure 29No deployment 28Harsh shifting 21Hesitation 21Steering noise 19Grinding brakes 16Won't start 15Slipping 13Won't shift 13Sudden acceleration 11Warning lights 10Knocking 9Headlights 9Fire or smoke 8Overheating 7Pulling 7Shudder 6Transmission failure 6Wipers 6Adaptive cruise 5Battery drain 5Spongy pedal 5
VIN decoder
See the problems and recalls for an exact car
Buying a used 2012 Ford Fusion?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history