2010 Ford Fusion: ABS light or ABS activating

Filed Oct 23, 2026 · Brakes · 175,000 miles · MO

The contact owns a 2010 Ford Fusion. The contact stated that the ABS warning light was illuminated. The contact stated that an independent mechanic replaced the ABS sensors; however, the failure persisted. The contact stated that while driving at approximately 5-10 MPH, the brake pedal went to the floorboard while depressing the brake pedal, causing the stopping distance to be significantly extended. The vehicle was taken to the dealer, where it was diagnosed with ABS pump failure, which resulted in the rear calipers freezing. The contact associated the failure with the federal safety agency Campaign Number: 19V904000 (Service Brakes, Hydraulic); however, the VIN was not included in the recall. The manufacturer was notified of the failure by phone. The failure mileage was approximately 175,000.

Filed Sep 19, 2026 · Brakes, Steering · GA

We have had multiple issues with the ABS and HCU since we bought this car used a couple years ago. We've replaced the ABS Module and HCU and had Ford reprogram it and are still having issues. The brakes go out fully and I went through a red light. The ABS and Traction control and check brake system lights come on. We've spent a couple thousand dollars trying to fix this issue. The brakes have gone out before this incident as well around 95k miles and intermittently since. If needed, contact for invoices.

Filed Jun 24, 2026 · Brakes · TX

The ABS Hydraulic Control Unit (HCU) failed internally due to a stuck valve. The component remains on the vehicle and is available for inspection upon request. While braking normally on a public road, the vehicle hit a minor road bump, causing the ABS to momentarily engage. Immediately following the bump, the brake pedal lost all hydraulic resistance and dropped severely to the floorboard. The vehicle experienced an immediate, drastic reduction in stopping power and an extended braking distance, nearly causing a collision. This sudden loss of braking capability puts the driver, passengers, and other motorists at immediate risk of a severe accident. There were absolutely no warning lamps, error messages, or symptoms prior to hitting the road bump. The braking system functioned completely normally until the exact moment the ABS was triggered by the uneven road surface. The vehicle and its components have not been inspected by the manufacturer, police, or insurance representatives. This identical safety-compromising failure mode (loss of pedal pressure immediately following ABS activation on a bump) is a thoroughly documented defect covered by Ford under Safety Recall 19S54 and Customer Satisfaction Program 21N11. However, because this specific vehicle has a production date falling just outside of Ford's arbitrary manufacturing window (which cut off on July 15, 2009), the vehicle is barred from receiving the safety remedy. This vehicle uses the exact same layout and suffers from the exact same dangerous safety defect. the federal safety agency needs to investigate and force an expansion of the vehicle build dates for this recall before this known defect causes a fatal crash.

Filed Jun 15, 2026 · Brakes · 53,000 miles · OR

The contact owns a 2010 Ford Fusion. The contact stated that while driving at an undisclosed speed, the brake pedal was depressed; however, the vehicle failed to stop as intended. The contact depressed the brake pedal to stop the vehicle. Several warning lights were illuminated. The vehicle was taken to the dealer where it was diagnosed with an ABS module failure. The contact was informed that the ABS module needed to be replaced. The vehicle was not repaired. The dealer made two attempts to replace the part with an aftermarket part. The ABS module was shipped out for the repair; however, the dealer was informed that the part could not be repaired. The vehicle was not repaired. The vehicle was towed to the residence. The contact referenced an unknown recall; however, the VIN was not associated with a recall related to the failure. The manufacturer was made aware of the failure. The failure mileage was approximately 53,000.

Filed Apr 21, 2026 · Brakes · VA

My 2010 Ford Fusion has been having issues with the ABS system/module showing the fault code, Service Advance Track System. After checking the recalls on this issue, I learned that Ford did have a recall for this make/model, recall # 19S54, BUT only from cars out of a certain plant during a certain time. I was told by the local Ford dealer as well as Ford Motor Co. that my vehicle was not included even though a recall was released on the same make, model, and year Fusion. I was told by the local Ford dealership that I was free to make a service appointment for the issue. I feel like this is a known issue that Ford is aware of and is using any means necessary to avoid taking the proper responsibility to service a vehicle under a recall for the exact same issue.

Filed Feb 24, 2026 · Brakes · TX

The vehicle turns on the traction control and ABS lights, automatically makes a bell sound as a warning, and stops braking, regardless of your speed at that moment.

Filed Feb 19, 2026 · Brakes · CA

The brakes went almost completely out- having to push the pedal all the way to the floor. All ABS and braking lights illuminated in the dash. There is limited stopping power. The car has become undriveable, even after replacing the HCU and abs system. The dealership has been unable to reprogram the brakes. This exact issue falls under recall 19s54, but Ford claims my problem does not meet the requirements- despite my vehicle having been assembled at the same facility (Hermosilla) and within the same date range as the recalled vehicles. I have receipts and documents to show all attempts at fixing the issue.

Filed Dec 6, 2025 · Brakes · WY

Ford claims no recall but my Hydralic:antilock/traction control/electronic limited slip control unit/module. My petal is sinking. Did an ABS bleed and problem continues. Could this part be in my car and I just haven’t got a recall

Filed Nov 21, 2025 · Brakes, Steering · FL

I am reporting a serious safety defect in my vehicle. While driving, the power steering suddenly failed without any warning, resulting in complete loss of steering control. At the same time, the brake warning light, ABS light, and traction control light illuminated, suggesting possible failure of critical braking and stability systems. This incident placed my safety and the safety of others at immediate risk, as the vehicle could not be steered properly and essential safety features may have been disabled. The problem persists, as the vehicle continues to have no functioning power steering and the warning lights remain on. The defective components are available for inspection, and the issue has been reproduced consistently since the initial failure. Given the severity of this malfunction and the danger it poses, I am requesting that a recall be issued to address this defect.

Filed Oct 3, 2025 · Brakes · AL

So this has happened three times in the span of a year. When applying the brakes the brake pedal it would go to the floor and several dash lights would come on(service advance trac, wrench light, abs light and parking brake light). As this would happen, we would pull off as safely and quickly as possible and shut the car off. But once we start the car again, everything is fine. When this situation happens, there is a very very high possibility of hitting someone. With doing research and talking to a local mechanic. It is doing the exact same thing as the Safety Recall 19S54 Certain 2006-2010 Model Year Fusion/Milan/MKZ/Zephyr Vehicles Equipped with Anti-brakes. HCU failure. But running my VIN it does not show it being recalled but my vehicle is a 2010 Fusion hybrid.

Filed Sep 19, 2025 · Brakes · 112,000 miles · WA

The contact owns a 2010 Ford Fusion. The contact stated that while driving and approaching a stop sign, the brake pedal was depressed; however, the vehicle failed to slow down as intended. The brake pedal was pumped several times for the vehicle to slow down. The vehicle was pulled over to the side of the road and parked. The vehicle was then towed to an independent mechanic, where it was determined that a valve in the junction box needed to be replaced. The vehicle was repaired, but the failure reoccurred 20 days later. The vehicle was then towed to the same independent mechanic, where it was diagnosed, and determined that the ABS junction block and module needed to be replaced. The vehicle was not repaired because the manufacturer had no parts available. The manufacturer was not notified of the failure. The failure mileage was approximately 112,000.

Filed Sep 8, 2025 · Brakes · MD

On [XXX] when leaving a shopping center parking lot, the brake system suddenly failed. I was able to press hard on the foot brake to stop the vehicle near the middle of the intersection. I pulled over to a parking space and replicated the issue. The car was towed to West 40 Auto Care on 284 Montvue Lane in Frederick, MD. Today, they told me they could not fix the issue. I made an appointment with the Ford Motor Company on 1 Waverly Drive for 9/15. I drove the car home slowly (about 1 mile) with the emergency lights on and going about 10 mph. Pressing hard on the foot brake will slowly stop the car. ABS icon and Service Advance Trac appear on the dashboard. Yesterday, the brake and wrench lights were also on. The footbrake does not go all the way to the floor. This issue is of course dangerous and might have caused an issue if I had to brake suddenly on a busy road at a higher speed. The issue appears to correspond with the link at [XXX] and summarized at [XXX] . I did not previously receive a recall issue in 2020. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)