2019 Ram 1500: grinding or squealing brakes

Filed May 7, 2026 · Brakes, Wheels · CO

Initially while taking a corner at low speed the truck made a clunk and grinding noise which resolved and then while going about 50 mph the grinding noise recurred which prompted stopping the vehicle on the side of the road and when almost to a stop, the wheels locked up causing a slight skid; the vehicle was in 4-wheel auto at the time and with change between 4wd and 2wd serveral times the front tires unlocked and i was able to drive it again. About 4 days later, while driving 70 mph, the vehicle started to make a grinding noise on the interstate, and I started to slow down, but unfortunately, I was on the left side of the highway on a narrow shoulder, and upon getting to a lower speed while in 2WD, my front axle locked up. I placed the vehicle in park, but due to safety concerns, I put the truck back in drive and tried to switch from 2WD to 4WD to unlock the axle, but unfortunately, the truck would not change gears. I then had to quickly get the vehicle to the other side during a time with fewer vehicles, while the left front tire was locked, and I had to drag it across the highway to ensure my safety. The left front tire remained locked, and after multiple attempts, the brake partially unlocked but continued to make a grinding and clunking noise. After some diagnostics, we determined the left front wheel hub was the issue, overheating and locking up. I reached out to mechanics for quotes on repair of said part, and upon reaching out to the dealer that I have used in the past for recalls and oil changes, I was informed there was a recall on said part/software that I was not aware of; the service rep used the last 8 of my VIN to look up my vehicle for the quote and provided the details about the recall. I use the RAM Guardian App which provides updates about recalls and upon checking it does not show a recall nor does it show a recall when i search my VIN and License Plate on the website. This seems to be a common issue based on customer reviews.

Filed Apr 18, 2026 · Transmission · NJ

Rear differential started making loud noise and grinding sounds

Filed Feb 26, 2026 · Engine, Transmission · 82,000 miles · TN

The contact owns a 2019 Ram 1500. The contact stated while driving at an undisclosed speed and hauling a 500 lb. trailer, the vehicle hesitated and failed to accelerate as intended while depressing the accelerator pedal. In addition, a bearing made an abnormal grinding sound. No warning lights were illuminated. The contact pulled over to the side of the road, opened the hood, and noticed dust on top of the eTorque Motor Generator Unit (MGU). The contact was able to restart the engine. The vehicle was taken to the dealer, where it was diagnosed and determined that the Motor Generator Unit (MGU) had failed. The dealer informed the contact that continuous driving of the vehicle had caused the tensioner to overextend due to the loss of power by the MGU and bearing. The contact was informed that parts to repair the vehicle were on backorder. The vehicle remained with the dealer unrepaired. The manufacturer was made aware of the failure and filed a claim. The failure mileage was approximately 82,000.

Filed Sep 5, 2025 · Brakes · TN

Having to replace the rotors and brake pads just about every 6 months. Constantly hearing the front brakes grinding into the rotors while driving. Front and rear calibers are not releasing pressure after brakes are applied. Issue began in 2022 after buying the vehicle.

Filed Jun 4, 2025 · MO

On 6-4-25 I was idling around a parking lot and my Ram truck SUDDENLY ACCELERATED by itself and took off....I slammed on the brakes and swerved to the side of the vehicle in front of me in case the truck didnt stop. The brakes squealed to a stop. Just in front of me was 4 lanes of traffic I would have driven across if the truck hadn't stopped...with 2 GRANDKIDS with me! It was not driver error and my floor mat was not in the way and I had not been using cruise control that day . But I did just have the truck in the shop a few days earlier for a recall on a software update

Filed Apr 1, 2025 · Transmission · NV

The MGU for the hybrid system of the etorque of them truck failed. The bearing inside of it has started to grind and there is very little replacements available to consumers for repair. The dealership, Fernley Ram, located in Fernley Nevada stated that there is only 210 parts available in all of the US. Im reading in different forums that there are thousands of consumers waiting months (4-6 on the high end) for the part to be available. The part failing can cause power loss to vehicle while driving and thankfully it failed when I was arriving home today. Just wanted to bring this up so it can be known and hopefully a remedy can be figured out.

Filed Feb 28, 2024 · Steering · NV

Vehicle makes a grinding noise every other start. I believe this si the rack and pinio might be failing. An even louder grinding noise when making a right turn. Showing sign of a defective Rack & Pinion with shake ride again at high speeds on the highway not constant lately but higher frequency has accured. I noticed there's a recall for the rack & Pinion but it shows that my vehicle is not affected. Please add my vehicle to that recall and or further investigate

Filed Mar 24, 2023 · Steering · 28,000 miles · MI

The contact owns a 2019 Ram 1500. The contact stated that upon starting the vehicle, the steering warning light illuminated but turned off after five minutes. While reversing, there was a grinding sound coming from the driver's side of the vehicle. The vehicle was taken to the dealer where it was diagnosed that the steering rack needed to be replaced. The vehicle was not repaired. The manufacturer was contacted and opened a case. The contact stated that the failure was related to the federal safety agency Campaign Number: 19V812000 (Steering). The failure mileage was approximately 28,000.

Filed Jan 9, 2023 · Transmission · 75,500 miles · GA

The contact owns a 2019 Ram 1500. The contact stated while making a turn from a complete stop, he heard abnormal grinding sounds coming from the rear of the vehicle. The contact stated that the failure had been reoccurring while driving. The contact stated upon taking the vehicle to the local dealer for an oil change, the dealer informed the contact that the rear axle was leaking fluid. The vehicle was then taken to an independent mechanic where it was diagnosed that the rear driveshaft needed to be replaced. The contact related the failure to the federal safety agency Campaign Numbers: 18V556000 (Power train) and 19V324000 (Power Train); however, the VIN was not included. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 75,500.

Filed Dec 6, 2021 · Visibility · SC

My wipers sound like they are grinding when i use them, and are very slow. To the point to where it seems like the wipers motor is quiting. My visibility when it rains will be close to 0 if it is not repaired.

Filed Dec 1, 2021 · Transmission · VA

Rear Differential began to grind and make noise. Dealer stated could cause failure and lead to crash if not repaired/replaced. Full diagnosis not complete as of this date.

Filed Aug 23, 2021 · Brakes, Steering · MN

This truck makes a grinding or rubbing sensation when turning and when turning and breaking. The sensation comes from the steering column and vibrates through the steering wheel. It is audible as well. Obviously, this is a concern not only for me any my occupants, but for others on the road way as well as I do not know what is causing this rubbing or grinding. This vehicle has been checked out by my dealer and they do not know what is wrong with it, although they were able to experience the problem for themselves. They also informed me that this is a known issue and that Chrysler is aware of the problem as there are many other trucks like mine with this defect. This issue started very sporadically and has continually gotten worse.