2019 Ram 1500: engine knocking or ticking

Filed Nov 5, 2026 · Engine · WY

On XXX I purchased the truck from Brandon Dodge, Jeep, Chrysler dealership in [XXX]. I put 2k down and financed 33k. Just over a year when by and on XXX (Sunday night) I heard a loud ticking noise so on XXX I drove it to [XXX] in [XXX] which is where I am stationed. On XXX they called me and said the engine was blown and that I needed a new engine. So on XXXI had the truck towed to Patriot Diesel Services in [XXX] for a second opinion. They confirmed that the engine was blown. I then contacted [XXX] from the Brandon dealership to see what options I had. They told me that I had to get it to one of there locations to confirm if the engine was blown. They also told me that there was nothing they could offer me if the diagnosis was correct. I told them when I Purchased the vehicle it had 105k mileage on it. It now has 138k and the engine is blown. They literally are taking no responsibility or offering any kind of help. I now have estimates for over 24k to fix it. I have now found out that there are class action lawsuits on Ram for these issues on this model. I want to know how are they legally allowed to sell this model when there is a suit against them. Case# 1:[XXX] District [XXX] State of [XXX]. And more suits in different states. I need help please!! INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Filed Oct 22, 2026 · Engine · GA

Blown Engine- No prior indicators that were obviously present. Driving on highway and about 40 miles in, loud ticking noises. Truck previously had manifold bolt breaking issues so assumed it was an exhaust leak. Within another 20 miles, the engine light came on and engine noises noticeably increased. Immediately took it to Ram Service and was diagnosed with a failed camshaft and camshaft bearing wear/scoring. Issue was reported to Ram dealership and ultimately fixed at owner cost.

Filed Apr 20, 2026 · Engine, Fuel system · MD

On March, while I was leaving to take my children to school, I discovered a loud, heavy metallic knocking sound coming from the engine of my 2019 Ram 1500 Classic. As I depressed the gas pedal, the knocking frequency increased immediately with the engine RPMs. Prior to this total failure, I had noticed the truck feeling hesitant and "stuttering" when I was trying to accelerate from red lights in the days leading up to the incident. ​Because I was concerned the engine would stall or fail completely while my children were in the vehicle, I immediately stopped driving it. A subsequent inspection at Don White’s CDJR confirmed DTC P051B-00 (Crankcase Pressure Sensor Performance). This fault is a recognized indicator of excessive crankcase pressure, which the federal safety agency has identified as a precursor to sudden engine stalling and fire risks in 3.0L EcoDiesel engines (Ref: Recall 19V‑757).

Filed Mar 11, 2026 · Engine · TX

Customer states his vehicle is ticking more when the vehicle is warmed up. Customer is aware of 250.00 on diag. Customer is aware of 3-5 days out on diag. Cause: heard the ticking noise is coming from the right side of engine. Need to remove right cylinder head to inspect lifters. Found cylinder 6 has a slight misfire which is corresponding to the ticking noise. Line #b cause: pulled vvt from motor and found a lot of metal shavings on it. As shown in video and picture. Found tsb s1709000010 - rev b. Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. As per tsb, need to replace motor due to metal shavings inside oiling system. The debris may clog oil ports inside motor and create issues in the future. Correction: need to replace long block all notes from dodge dealership service

Filed Aug 11, 2025 · Electrical · FL

At about 77k miles, I started hearing a humming noise from the engine when I would accelerate and then decelerate. Upon inspection and confirmation from Ram dealership, the Engine Generator Kit (alternator) appeared to have a bad bearing and needed to be replaced. I initially agreed to the replacement until I was told that the part needed is on backorder and that there were roughly 4k orders placed ahead of mine nationally. This means I have no way of fixing this issue using an original MOPAR part. I was told I can agree to pay for the item to get the order placed and then wait until it comes in with no timeframe given other than it could be weeks or months. I am now having to drive around in a vehicle that could potentially breakdown at any time and thus leaving me with no vehicle. I do not have any warning lights on the dash but it seems like I am driving a ticking timebomb.

Filed May 1, 2025 · Electrical, Engine · 43,000 miles · MI

The contact owns a 2019 Ram 1500. The contact stated that upon starting the vehicle, there was an abnormal ticking sound coming from the engine, with a message that the "Fuel/Air Ration Imbalance" was displayed. The vehicle was taken to an independent mechanic, where the contact was informed that the rocker arm bearings and lifters needed to be replaced. In addition, the contact stated that while driving at various speeds, several warning lights were illuminated. The contact stated that the windshield wipers activated independently, the power steering assist had failed, and the vehicle failed to stop while depressing the brake pedal. The contact stated that the vehicle went into LIMP Mode, with the "Service Transmission, Continue to Drive, “Do not Shift or Turn off Engine,” and "No Buss" messages were displayed on the instrument panel. The contact initially inspected the vehicle and determined that the battery, relays, and fuses were all satisfactory. The vehicle was taken back to the independent mechanic, where the contact was informed that the vehicle had either a faulty ground wire or a computer. Neither the dealer nor the manufacturer was notified of the failure. The vehicle was not repaired. The failure mileage was approximately 43,000.

Filed Apr 4, 2025 · Engine · TX

These are exact words from dealer. “pulled vvt from motor and found a lot of metal shavings on it. As shown in video and picture. Found tsb s1709000010 - rev b. Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. As per tsb, need to replace motor due to metal shavings inside oiling system. The debris may clog oil ports inside motor and create issues in the future. Correction: need to replace long block” “customer states his vehicle is ticking more when the vehicle is warmed up. Customer is aware of 250.00 on diag. Customer is aware of 3-5 days out on diag. Cause: heard the ticking noise is coming from the right side of engine. Need to remove right cylinder head to inspect lifters. Found cylinder 6 has a slight misfire which is corresponding to the ticking noise.”

Filed Apr 2, 2025 · Engine · MI

Lifter ticking in 3.6l pentastar

Filed Mar 19, 2025 · Engine · NM

Engine ticking noticeably loud ticking noise loss of power and poor engine performance

Filed Oct 22, 2024 · Transmission · WA

Hemi 5.7L ticking. Took the truck to another mechanic to assess and the engine is filled with metal shavings from a failed assembly at 50k miles. A power train assembly should get at minimum 100k miles before any issues would arrive. A STAR report has been generated on this very issue. However, we purchased this vehicle used with 91 miles on the odometer as it was listed as the previous owner being the manufacturer itself and was used and moved around from showroom to showroom as a floor model. We have no warranty and now must replace the entire engine due to the metal shavings found throughout the engine. Cost to replace is 10k+ which is horrifying an engine must be replaced at 50K miles due to a known product design flaw causing so many of us to experience the same exact issue around 50k miles. Fiat only replaces those under warranty with the same flawed/defective part only to have the same issue reappear...that to me means the part design is flawed. Both of our mechanics said this is a known defect that many of their customers have experienced. Our check engine light came on prior to a scheduled visit to our mechanic on July 8 as we were hearing a ticking noise. Magically, the morning of the 8th when I first went start the truck to take to our mechanic regarding the light the light was not on any longer. We still attended the appointment to check out the tick. He recommended engine replacement. When I left the mechanics and got 5 miles down the road the check engine light came back on. Since then we took to another mechanic who dismantled the engine somewhat to check the lifter assembly and sure enough there it was, completely disintegrated, hanging on by a thread left of an actual bolt, metal shavings in the oil pan too. He indicated to us that when that small thread left from the bolt finally failed the engine would seize up and we would lose power immediately. Extremely dangerous at highway speeds or driving up and down the mountainous areas.

Filed Sep 30, 2024 · Engine · IN

Engine developed a ticking sound at idle. Turned out to be broken bolts on the exhaust manifolds which could have caused carbon monoxide to leak into cab of truck.

Filed Jul 9, 2024 · Engine, Transmission · WV

Vehicle developed the infamous "hemi tick" chronicled in multiple news articles, bulletins & complaints. Defective exhaust manifold design causes it to trap heat, melting the bolts and cracking the manifolds. This leads to loud ticking when engine is started from cold and can eventually lead to engine failure. Had to have both manifolds replaced, along with gaskets.